[PATCH net-next v2 0/8] r8152: refactor and extend RTL8157/8159 support

[Chih Kai Hsu <hsu.chih.kai@realtek.com>]

v2:
- For patch #1, use read_poll_timeout() to replace the manual for-loop polling.
- For patch #2 and #3, rewrite the commit message.

v1:
RTL8157 and RTL8159 have different init, enable, up/down, hw_phy_cfg,
and PHY access sequences from RTL8156.  This series splits the shared
callbacks into per-chip variants and adds the missing RTL8157/8159
functionality: dedicated unload and change_mtu callbacks, TGPHY register
access via phy_read/phy_write pointers in struct rtl_ops, flow control
patch support through rtl_fc_pause_pkt_en(), and UPS support via
r8157_ups_en().

Chih Kai Hsu (8):
  r8152: refactor r8156_init
  r8152: support RTL8159 for different packages
  r8152: refactor rtl8156_enable, rtl8156_up, and rtl8156_down
  r8152: refactor r8157_hw_phy_cfg
  r8152: support rtl8157_unload and rtl8157_change_mtu
  r8152: add TGPHY access support
  r8152: support rtl_fc_pause_pkt_en()
  r8152: support UPS for RTL8157 and RTL8159

 drivers/net/usb/r8152.c | 1297 +++++++++++++++++++++++++++++++--------
 1 file changed, 1054 insertions(+), 243 deletions(-)

-- 
2.34.1