From: "Bastien Curutchet (Schneider Electric)" <bastien.curutchet@bootlin.com>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>
Cc: "Pascal Eberhard" <pascal.eberhard@se.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Bastien Curutchet (Schneider Electric)"
<bastien.curutchet@bootlin.com>
Subject: [PATCH net-next v3 02/10] net: dsa: microchip: add the number of periodic signals to chip infos
Date: Tue, 08 Sep 2026 09:27:42 +0200 [thread overview]
Message-ID: <20260908-ksz-perout-v3-2-6722a3f1ca75@bootlin.com> (raw)
In-Reply-To: <20260908-ksz-perout-v3-0-6722a3f1ca75@bootlin.com>
The number of periodic signals available is hardcoded to 3 while
KSZ8463 can produce 12 different periodic signals.
Add an n_per_out attribute to the struct ksz_chip_data to make this
setting configurable.
Set it to 3 for all the PTP-capable switches.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
drivers/net/dsa/microchip/ksz_common.c | 10 ++++++++++
drivers/net/dsa/microchip/ksz_common.h | 1 +
drivers/net/dsa/microchip/ksz_ptp.c | 2 +-
3 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index d01fba253af5..041bb4f96365 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -1195,6 +1195,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.wr_table = &ksz8563_register_set,
.rd_table = &ksz8563_register_set,
.n_pins = 2,
+ .n_per_out = 3,
},
[KSZ8795] = {
@@ -1416,6 +1417,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.wr_table = &ksz9477_register_set,
.rd_table = &ksz9477_register_set,
.n_pins = 2,
+ .n_per_out = 3,
},
[KSZ9896] = {
@@ -1547,6 +1549,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.gbit_capable = {true, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[KSZ8567] = {
@@ -1585,6 +1588,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[KSZ9567] = {
@@ -1620,6 +1624,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.gbit_capable = {true, true, true, true, true, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9370] = {
@@ -1652,6 +1657,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.internal_phy = {true, true, true, true, false},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9371] = {
@@ -1684,6 +1690,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.internal_phy = {true, true, true, true, false, false},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9372] = {
@@ -1720,6 +1727,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
false, false, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9373] = {
@@ -1756,6 +1764,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
false, false, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9374] = {
@@ -1792,6 +1801,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
false, false, true, true},
.ptp_capable = true,
.n_pins = 2,
+ .n_per_out = 3,
},
[LAN9646] = {
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index c678fc6597dc..1155b39350c2 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -140,6 +140,7 @@ struct ksz_chip_data {
const struct regmap_access_table *wr_table;
const struct regmap_access_table *rd_table;
const u8 n_pins;
+ const u8 n_per_out;
};
struct ksz_irq {
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index c92936bf78d3..f80015250e5a 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -1051,7 +1051,7 @@ int ksz_ptp_clock_register(struct dsa_switch *ds)
ptp_data->caps.enable = ksz_ptp_enable;
ptp_data->caps.verify = ksz_ptp_verify_pin;
ptp_data->caps.n_pins = dev->info->n_pins;
- ptp_data->caps.n_per_out = 3;
+ ptp_data->caps.n_per_out = dev->info->n_per_out;
ret = ksz_ptp_start_clock(dev);
if (ret)
--
2.55.0
next prev parent reply other threads:[~2026-09-08 7:27 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-08 7:27 [PATCH net-next v3 00/10] net: dsa: microchip: add periodic output support for the KSZ8463 Bastien Curutchet (Schneider Electric)
2026-09-08 7:27 ` [PATCH net-next v3 01/10] net: dsa: microchip: add the number of pins to chip infos Bastien Curutchet (Schneider Electric)
2026-09-10 10:30 ` netdev-bot+sashiko
2026-09-08 7:27 ` Bastien Curutchet (Schneider Electric) [this message]
2026-09-10 10:30 ` [PATCH net-next v3 02/10] net: dsa: microchip: add the number of periodic signals " netdev-bot+sashiko
2026-09-08 7:27 ` [PATCH net-next v3 03/10] net: dsa: microchip: use dynamic mask to check pulse width validity Bastien Curutchet (Schneider Electric)
2026-09-08 7:27 ` [PATCH net-next v3 04/10] net: dsa: microchip: extract PTP callbacks configuration from PTP registration Bastien Curutchet (Schneider Electric)
2026-09-08 7:27 ` [PATCH net-next v3 05/10] net: dsa: microchip: extract ptp_get_pin Bastien Curutchet (Schneider Electric)
2026-09-08 7:27 ` [PATCH net-next v3 06/10] net: dsa: microchip: extract compute_width Bastien Curutchet (Schneider Electric)
2026-09-10 10:30 ` netdev-bot+sashiko
2026-09-08 7:27 ` [PATCH net-next v3 07/10] net: dsa: microchip: extract prepare reset Bastien Curutchet (Schneider Electric)
2026-09-10 10:30 ` netdev-bot+sashiko
2026-09-08 7:27 ` [PATCH net-next v3 08/10] net: dsa: microchip: extract time update Bastien Curutchet (Schneider Electric)
2026-09-08 7:27 ` [PATCH net-next v3 09/10] net: dsa: microchip: extract time adjustment Bastien Curutchet (Schneider Electric)
2026-09-08 7:27 ` [PATCH net-next v3 10/10] net: dsa: microchip: add periodic output support for the KSZ8463 Bastien Curutchet (Schneider Electric)
2026-09-10 10:30 ` netdev-bot+sashiko
2026-09-11 7:23 ` Bastien Curutchet
2026-09-11 23:33 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260908-ksz-perout-v3-2-6722a3f1ca75@bootlin.com \
--to=bastien.curutchet@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=pascal.eberhard@se.com \
--cc=richardcochran@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox