[PATCH net-next v6 3/6] net: dsa: motorcomm: move mib start from probe() to dsa_setup()

[Kyle Switch <kyle.switch@motor-comm.com>]

Move MIB polling start from probe() to dsa_setup().so that it can
be enabled based on the actual switch family support.

Signed-off-by: Kyle Switch <kyle.switch@motor-comm.com>
---
 drivers/net/dsa/motorcomm/chip.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index 191a7aa3733e..3a70ff00c126 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -4553,6 +4553,14 @@ static int yt921x_dsa_setup(struct dsa_switch *ds)
 	struct device_node *child;
 	int res;
 
+	/* mib polling init */
+	for (size_t i = 0; i < ARRAY_SIZE(priv->ports); i++) {
+		struct yt921x_port *pp = &priv->ports[i];
+
+		pp->index = i;
+		INIT_DELAYED_WORK(&pp->mib_read, yt921x_poll_mib);
+	}
+
 	mutex_lock(&priv->reg_lock);
 	res = yt921x_chip_reset(priv);
 	mutex_unlock(&priv->reg_lock);
@@ -4810,13 +4818,6 @@ static int yt921x_mdio_probe(struct mdio_device *mdiodev)
 	priv->reg_ops = &yt921x_reg_ops_mdio;
 	priv->reg_ctx = mdio;
 
-	for (size_t i = 0; i < ARRAY_SIZE(priv->ports); i++) {
-		struct yt921x_port *pp = &priv->ports[i];
-
-		pp->index = i;
-		INIT_DELAYED_WORK(&pp->mib_read, yt921x_poll_mib);
-	}
-
 	ds = &priv->ds;
 	ds->dev = dev;
 	res = yt92xx_register_switch(ds);
-- 
2.25.1