From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: paul@pbarker.dev, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Richard Cochran <richardcochran@gmail.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"DavidS. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Vadim Fedorenko <vadim.fedorenko@linux.dev>,
Sergey Shtylyov <sergei.shtylyov@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH net-next v4 05/10] net: ethernet: ravb: Propagate error from ptp_clock_register()
Date: Wed, 9 Sep 2026 19:30:22 +0200 [thread overview]
Message-ID: <20260909173027.2201560-6-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20260909173027.2201560-1-niklas.soderlund+renesas@ragnatech.se>
If the PTP clock registration failed the error is silently ignored.
Before reworking all callers of ravb_ptp_init() handle and propagate the
error so it can be used.
Link: https://sashiko.dev/#/patchset/20260610102432.3538432-2-niklas.soderlund+renesas@ragnatech.se?part=1
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <sergei.shtylyov@gmail.com>
---
* Changes since v3
- Add check to keep sashiko happy, the remark is fixed already later in
the series but to keep the bot happy.
* Changes since v2
- Rework to remove the caching of phc_index added by LLM without access
to hardware.
* Changes since v1
- New in v2.
---
drivers/net/ethernet/renesas/ravb.h | 3 +--
drivers/net/ethernet/renesas/ravb_main.c | 5 ++---
drivers/net/ethernet/renesas/ravb_ptp.c | 27 +++++++++++-------------
3 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index aa45f5466001..0c122a815840 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -1028,7 +1028,6 @@ struct ravb_ptp_perout {
struct ravb_ptp {
struct ptp_clock *clock;
struct ptp_clock_info info;
- int phc_index;
u32 default_addend;
u32 current_addend;
int extts[N_EXT_TS];
@@ -1163,7 +1162,7 @@ void ravb_modify(struct net_device *ndev, enum ravb_reg reg, u32 clear,
int ravb_wait(struct net_device *ndev, enum ravb_reg reg, u32 mask, u32 value);
void ravb_ptp_interrupt(struct net_device *ndev);
-void ravb_ptp_init(struct net_device *ndev);
+int ravb_ptp_init(struct net_device *ndev);
void ravb_ptp_stop(struct net_device *ndev);
#endif /* #ifndef __RAVB_H__ */
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index e44d065f77cc..5ba322593a01 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1774,7 +1774,7 @@ static int ravb_get_ts_info(struct net_device *ndev,
struct ravb_private *priv = netdev_priv(ndev);
const struct ravb_hw_info *hw_info = priv->info;
- if (hw_info->gptp || hw_info->ccc_gac) {
+ if (priv->ptp.clock && (hw_info->gptp || hw_info->ccc_gac)) {
info->so_timestamping =
SOF_TIMESTAMPING_TX_SOFTWARE |
SOF_TIMESTAMPING_TX_HARDWARE |
@@ -1785,7 +1785,7 @@ static int ravb_get_ts_info(struct net_device *ndev,
(1 << HWTSTAMP_FILTER_NONE) |
(1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
(1 << HWTSTAMP_FILTER_ALL);
- info->phc_index = READ_ONCE(priv->ptp.phc_index);
+ info->phc_index = ptp_clock_index(priv->ptp.clock);
}
return 0;
@@ -2934,7 +2934,6 @@ static int ravb_probe(struct platform_device *pdev)
priv->rstc = rstc;
priv->ndev = ndev;
priv->pdev = pdev;
- priv->ptp.phc_index = -1;
priv->num_tx_ring[RAVB_BE] = BE_TX_RING_SIZE;
priv->num_rx_ring[RAVB_BE] = BE_RX_RING_SIZE;
if (info->nc_queues) {
diff --git a/drivers/net/ethernet/renesas/ravb_ptp.c b/drivers/net/ethernet/renesas/ravb_ptp.c
index f70b616ac847..37161c0579ce 100644
--- a/drivers/net/ethernet/renesas/ravb_ptp.c
+++ b/drivers/net/ethernet/renesas/ravb_ptp.c
@@ -313,11 +313,11 @@ void ravb_ptp_interrupt(struct net_device *ndev)
ravb_write(ndev, ~(gis | GIS_RESERVED), GIS);
}
-void ravb_ptp_init(struct net_device *ndev)
+int ravb_ptp_init(struct net_device *ndev)
{
struct ravb_private *priv = netdev_priv(ndev);
- struct ptp_clock *clock;
unsigned long flags;
+ int ret = 0;
priv->ptp.info = ravb_ptp_info;
@@ -338,15 +338,14 @@ void ravb_ptp_init(struct net_device *ndev)
ravb_modify(ndev, GCCR, GCCR_TCSS, GCCR_TCSS_ADJGPTP);
spin_unlock_irqrestore(&priv->lock, flags);
- clock = ptp_clock_register(&priv->ptp.info, &priv->pdev->dev);
- if (IS_ERR(clock)) {
- netdev_err(ndev, "failed to register PTP clock: %pe\n", clock);
- clock = NULL;
+ priv->ptp.clock = ptp_clock_register(&priv->ptp.info, &priv->pdev->dev);
+ if (IS_ERR(priv->ptp.clock)) {
+ ret = PTR_ERR(priv->ptp.clock);
+ priv->ptp.clock = NULL;
+ ravb_ptp_stop(ndev);
}
- WRITE_ONCE(priv->ptp.clock, clock);
- if (clock)
- WRITE_ONCE(priv->ptp.phc_index, ptp_clock_index(clock));
+ return ret;
}
static void ravb_ptp_disable(struct net_device *ndev)
@@ -369,14 +368,12 @@ static void ravb_ptp_sync_irqs(struct net_device *ndev)
void ravb_ptp_stop(struct net_device *ndev)
{
struct ravb_private *priv = netdev_priv(ndev);
- struct ptp_clock *clock;
-
- WRITE_ONCE(priv->ptp.phc_index, -1);
- clock = xchg(&priv->ptp.clock, NULL);
ravb_ptp_disable(ndev);
ravb_ptp_sync_irqs(ndev);
- if (clock)
- ptp_clock_unregister(clock);
+ if (priv->ptp.clock) {
+ ptp_clock_unregister(priv->ptp.clock);
+ priv->ptp.clock = NULL;
+ }
}
--
2.55.0
next prev parent reply other threads:[~2026-09-09 17:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-09 17:30 [PATCH net-next v4 00/10] ravb: Add gPTP support for Gen4 Niklas Söderlund
2026-09-09 17:30 ` [PATCH net-next v4 01/10] net: ethernet: ravb: Remove gPTP control from WoL setup and restore Niklas Söderlund
2026-09-09 17:30 ` [PATCH net-next v4 02/10] net: ethernet: ravb: Move programming of gPTP timer interval Niklas Söderlund
2026-09-09 17:30 ` [PATCH net-next v4 03/10] net: ethernet: ravb: Simplify gPTP start and stop Niklas Söderlund
2026-09-09 17:30 ` [PATCH net-next v4 04/10] net: ethernet: ravb: Remove redundant argument to ravb_ptp_init() Niklas Söderlund
2026-09-09 17:30 ` Niklas Söderlund [this message]
2026-09-09 17:30 ` [PATCH net-next v4 06/10] net: ethernet: ravb: Replace gPTP flags with callbacks Niklas Söderlund
2026-09-09 17:30 ` [PATCH net-next v4 07/10] net: ethernet: ravb: Add callback for gPTP probe Niklas Söderlund
2026-09-09 17:30 ` [PATCH net-next v4 08/10] net: ethernet: ravb: Add callback for gPTP clock index Niklas Söderlund
2026-09-09 17:30 ` [PATCH net-next v4 09/10] dt-bindings: net: renesas,etheravb: Add optional gPTP phandle for Gen4 Niklas Söderlund
2026-09-09 17:30 ` [PATCH net-next v4 10/10] net: ethernet: ravb: Add gPTP support " Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260909173027.2201560-6-niklas.soderlund+renesas@ragnatech.se \
--to=niklas.soderlund+renesas@ragnatech.se \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=paul@pbarker.dev \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=sergei.shtylyov@gmail.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox