From: James Clark <jjc@jclark.com>
To: "Théo Lebrun" <theo.lebrun@bootlin.com>, netdev@vger.kernel.org
Cc: Richard Cochran <richardcochran@gmail.com>,
Conor Dooley <conor.dooley@microchip.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-kernel@vger.kernel.org, Nicolai Buchwitz <nb@tipi-net.de>
Subject: [PATCH net v2] net: macb: fix ordering around PTP timestamp read
Date: Thu, 10 Sep 2026 11:06:52 +0700 [thread overview]
Message-ID: <20260910040658.18359-1-jjc@jclark.com> (raw)
PTP_SYS_OFFSET_EXTENDED returns system timestamps that do not correctly
bracket the PHC register read on MACB/GEM. On a Raspberry Pi 5, the
returned interval can be as short as 37 ns, while an ordered register
read takes approximately 1 us. This biases the midpoint used by phc2sys,
causing CLOCK_REALTIME to run approximately 0.5 us ahead when synchronized
to the PHC.
gem_tsu_get_time() reads the nanoseconds register using the driver's
relaxed MMIO accessor. On weakly ordered systems, the subsequent system
timestamp can be taken before the register read completes. The internal
smp_rmb() in the pre-timestamp path also does not guarantee ordering
against the subsequent MMIO read.
Add rmb() before and after the bracketed nanoseconds read in both the
normal and seconds rollover paths so the system timestamps bracket the
PHC read. Adding the post-read barrier increases the minimum interval on
the same Raspberry Pi 5 to approximately 1 us.
Fixes: e51bb5c2784c ("net: macb: ptp: Switch to gettimex64() interface")
Tested-by: Nicolai Buchwitz <nb@tipi-net.de> # Raspberry Pi CM5, min bracket 37 ns -> 981 ns
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: James Clark <jjc@jclark.com>
---
Changes in v2:
- Add rmb() before the PHC read in both paths, following Théo Lebrun's
feedback. Explain why the pre-timestamp path's smp_rmb() is insufficient
for MMIO ordering.
- Wrap the post-read barrier comments.
- Add Nicolai Buchwitz's Tested-by and Reviewed-by tags.
- Drop RFC.
v1: https://lore.kernel.org/netdev/20260908053150.28694-1-jjc@jclark.com/
Nicolai's review and testing were on v1. The additional pre-read barriers
in v2 address Théo's feedback.
Reproducer:
#include <fcntl.h>
#include <linux/ptp_clock.h>
#include <stdio.h>
#include <sys/ioctl.h>
#define DEVICE "/dev/ptp0"
int main(void)
{
struct ptp_sys_offset_extended ex = { .n_samples = 25 };
long long min = -1;
int fd = open(DEVICE, O_RDONLY);
if (fd < 0) {
perror(DEVICE);
return 1;
}
for (int batch = 0; batch < 40; batch++) {
if (ioctl(fd, PTP_SYS_OFFSET_EXTENDED, &ex) < 0) {
perror("PTP_SYS_OFFSET_EXTENDED");
return 1;
}
for (unsigned int i = 0; i < ex.n_samples; i++) {
long long bracket = (ex.ts[i][2].sec - ex.ts[i][0].sec) * 1000000000LL
+ (long long)ex.ts[i][2].nsec - ex.ts[i][0].nsec;
if (min < 0 || bracket < min)
min = bracket;
}
}
printf("min bracket: %lld ns\n", min);
return 0;
}
drivers/net/ethernet/cadence/macb_ptp.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/net/ethernet/cadence/macb_ptp.c b/drivers/net/ethernet/cadence/macb_ptp.c
index e5195d7da..4fb287608 100644
--- a/drivers/net/ethernet/cadence/macb_ptp.c
+++ b/drivers/net/ethernet/cadence/macb_ptp.c
@@ -50,7 +50,15 @@ static int gem_tsu_get_time(struct ptp_clock_info *ptp, struct timespec64 *ts,
spin_lock_irqsave(&bp->tsu_clk_lock, flags);
ptp_read_system_prets(sts);
+ /* ptp_read_system_prets() uses smp_rmb() internally,
+ * which does not guarantee ordering against MMIO reads.
+ */
+ rmb();
first = gem_readl(bp, TN);
+ /* Ensure the PHC read completes before taking
+ * the post timestamp.
+ */
+ rmb();
ptp_read_system_postts(sts);
secl = gem_readl(bp, TSL);
sech = gem_readl(bp, TSH);
@@ -62,7 +70,15 @@ static int gem_tsu_get_time(struct ptp_clock_info *ptp, struct timespec64 *ts,
* (assume all done within 1s)
*/
ptp_read_system_prets(sts);
+ /* ptp_read_system_prets() uses smp_rmb() internally,
+ * which does not guarantee ordering against MMIO reads.
+ */
+ rmb();
ts->tv_nsec = gem_readl(bp, TN);
+ /* Ensure the PHC read completes before taking
+ * the post timestamp.
+ */
+ rmb();
ptp_read_system_postts(sts);
secl = gem_readl(bp, TSL);
sech = gem_readl(bp, TSH);
--
2.47.3
next reply other threads:[~2026-09-10 4:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 4:06 James Clark [this message]
2026-09-10 7:13 ` [PATCH net v2] net: macb: fix ordering around PTP timestamp read Théo Lebrun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910040658.18359-1-jjc@jclark.com \
--to=jjc@jclark.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor.dooley@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nb@tipi-net.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=theo.lebrun@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox