[PATCH net-next 2/2] selftests: drv-net: Add VLAN test

[Ovidiu Panait <ovidiu.panait.rb@renesas.com>]

Add a test that validates ping traffic over VLAN interfaces. It aims
to catch drivers which mishandle hardware VLAN tag stripping, in
particular QinQ.

Three VLAN configurations are covered, each with hardware RX VLAN
stripping enabled and disabled (via the rx-vlan-offload and
rx-vlan-stag-hw-parse features):
- a single 802.1q VLAN interface
- a single 802.1ad VLAN interface
- an 802.1q VLAN stacked on top of an 802.1ad interface

The "hw" test variants enable the RX VLAN stripping features supported
by the device (rx-vlan-offload and rx-vlan-stag-hw-parse), the "sw"
test variants disable all of them. A test is xfailed if the requested
configuration is not possible.

VLAN insertion offloads are not tested for now.

NETIF=end0 LOCAL_V4=172.16.0.2 REMOTE_V4=172.16.0.3 \
REMOTE_TYPE=ssh REMOTE_ARGS=root@172.16.0.3 \
run_kselftest.sh -t drivers/net/hw:vlan.py
 TAP version 13
 1..1
 # timeout set to 0
 # selftests: drivers/net/hw: vlan.py
 # # Interface: end0, driver: st_gmac
 # TAP version 13
 # 1..6
 # ok 1 vlan.test.8021q_hw
 # ok 2 vlan.test.8021q_sw
 # ok 3 vlan.test.8021ad_hw
 # ok 4 vlan.test.8021ad_sw
 # ok 5 vlan.test.qinq_hw
 # ok 6 vlan.test.qinq_sw
 # # Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
 ok 1 selftests: drivers/net/hw: vlan.py
 # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0

Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
 .../testing/selftests/drivers/net/hw/Makefile |   1 +
 tools/testing/selftests/drivers/net/hw/config |   1 +
 .../testing/selftests/drivers/net/hw/vlan.py  | 127 ++++++++++++++++++
 3 files changed, 129 insertions(+)
 create mode 100755 tools/testing/selftests/drivers/net/hw/vlan.py

diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile
index bd3b8d2fa47e..5582b644078e 100644
--- a/tools/testing/selftests/drivers/net/hw/Makefile
+++ b/tools/testing/selftests/drivers/net/hw/Makefile
@@ -54,6 +54,7 @@ TEST_PROGS = \
 	tso.py \
 	userns_devmem.py \
 	uso.py \
+	vlan.py \
 	xdp_metadata.py \
 	xsk_reconfig.py \
 	#
diff --git a/tools/testing/selftests/drivers/net/hw/config b/tools/testing/selftests/drivers/net/hw/config
index d89a9ba17655..c6c2b64bb712 100644
--- a/tools/testing/selftests/drivers/net/hw/config
+++ b/tools/testing/selftests/drivers/net/hw/config
@@ -24,5 +24,6 @@ CONFIG_NET_SCH_INGRESS=y
 CONFIG_SYNC_FILE=y
 CONFIG_UDMABUF=y
 CONFIG_USER_NS=y
+CONFIG_VLAN_8021Q=m
 CONFIG_VXLAN=y
 CONFIG_XFRM_USER=y
diff --git a/tools/testing/selftests/drivers/net/hw/vlan.py b/tools/testing/selftests/drivers/net/hw/vlan.py
new file mode 100755
index 000000000000..f514ad3e5dfd
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/vlan.py
@@ -0,0 +1,127 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+"""
+VLAN tests.
+
+Validates that ping traffic is sent and received correctly over 802.1q
+and 802.1ad VLAN interfaces, with hardware RX VLAN stripping enabled and
+disabled on the local interface.
+
+The "hw" test variants enable the RX VLAN stripping features supported by
+the device, the "sw" test variants disable all of them. A test is xfailed
+if the requested configuration is not possible.
+
+Test cases:
+  - 8021q_hw:  Traffic over a single 802.1q VLAN, HW stripping on
+  - 8021q_sw:  Traffic over a single 802.1q VLAN, HW stripping off
+  - 8021ad_hw: Traffic over a single 802.1ad VLAN, HW stripping on
+  - 8021ad_sw: Traffic over a single 802.1ad VLAN, HW stripping off
+  - qinq_hw:   Traffic over an 802.1q VLAN stacked on an 802.1ad VLAN,
+               HW stripping on
+  - qinq_sw:   Traffic over an 802.1q VLAN stacked on an 802.1ad VLAN,
+               HW stripping off
+"""
+
+import os
+
+from lib.py import (
+    KsftNamedVariant,
+    KsftXfailEx,
+    NetDrvEpEnv,
+    cmd,
+    defer,
+    ethtool,
+    ip,
+    ksft_exit,
+    ksft_run,
+    ksft_variants,
+    set_ethtool_feat,
+)
+
+OUTER_DEV = f"vlout{os.getpid()}"
+INNER_DEV = f"vlin{os.getpid()}"
+
+OUTER_VID = 100
+INNER_VID = 200
+
+LOCAL_IP = "198.51.100.1"
+REMOTE_IP = "198.51.100.2"
+
+
+def _vlan_add(base, name, proto, vid, host=None):
+    """Create a VLAN device on top of base and bring it up."""
+
+    ip(f"link add link {base} name {name} type vlan proto {proto} id {vid}",
+       host=host)
+    defer(ip, f"link del {name}", host=host)
+    ip(f"link set {name} up", host=host)
+
+
+def _vlan_setup(base, addr, outer_proto, inner_proto, host=None):
+    """Create VLAN interfaces on base and set an IP on the innermost one."""
+
+    _vlan_add(base, OUTER_DEV, outer_proto, OUTER_VID, host=host)
+    if inner_proto:
+        _vlan_add(OUTER_DEV, INNER_DEV, inner_proto, INNER_VID, host=host)
+
+    dev = INNER_DEV if inner_proto else OUTER_DEV
+    ip(f"addr add {addr}/24 dev {dev}", host=host)
+
+
+def _setup(cfg, outer_proto, inner_proto, hw_strip):
+    """Configure VLAN stripping and create the VLAN interfaces."""
+
+    names = ["rx-vlan-offload"]
+    if outer_proto == "802.1ad":
+        names.append("rx-vlan-stag-hw-parse")
+
+    feat = ethtool(f"-k {cfg.ifname}", json=True)[0]
+    feats = {}
+    for name in names:
+        # hw: skip the features the device does not support
+        # sw: request all of them off
+        if hw_strip and feat[name]["fixed"] and not feat[name]["active"]:
+            continue
+        feats[name] = hw_strip
+
+    if hw_strip and not feats:
+        raise KsftXfailEx("Device does not support RX VLAN stripping")
+
+    set_ethtool_feat(cfg.ifname, feat, feats)
+
+    _vlan_setup(cfg.ifname, LOCAL_IP, outer_proto, inner_proto)
+    _vlan_setup(cfg.remote_ifname, REMOTE_IP, outer_proto, inner_proto,
+                host=cfg.remote)
+
+
+def _vlan_variants():
+    """Generator that yields the VLAN protocols and the stripping mode."""
+
+    yield KsftNamedVariant("8021q_hw", "802.1q", None, True)
+    yield KsftNamedVariant("8021q_sw", "802.1q", None, False)
+    yield KsftNamedVariant("8021ad_hw", "802.1ad", None, True)
+    yield KsftNamedVariant("8021ad_sw", "802.1ad", None, False)
+    yield KsftNamedVariant("qinq_hw", "802.1ad", "802.1q", True)
+    yield KsftNamedVariant("qinq_sw", "802.1ad", "802.1q", False)
+
+
+@ksft_variants(_vlan_variants())
+def test(cfg, outer_proto, inner_proto, hw_strip):
+    """Run a single VLAN test"""
+
+    _setup(cfg, outer_proto, inner_proto, hw_strip)
+
+    cmd(f"ping -c 1 -W 5 {REMOTE_IP}")
+
+
+def main() -> None:
+    """ Ksft boiler plate main """
+
+    with NetDrvEpEnv(__file__) as cfg:
+        ksft_run(cases=[test], args=(cfg, ))
+    ksft_exit()
+
+
+if __name__ == "__main__":
+    main()
-- 
2.34.1