From: Minxi Hou <houminxi@gmail.com>
To: netdev@vger.kernel.org
Cc: Aaron Conole <aconole@redhat.com>,
Eelco Chaudron <echaudro@redhat.com>,
Ilya Maximets <i.maximets@ovn.org>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>, Shuah Khan <shuah@kernel.org>,
dev@openvswitch.org, linux-kselftest@vger.kernel.org,
Minxi Hou <houminxi@gmail.com>
Subject: [PATCH net-next v5 0/2] selftests: openvswitch: SCTP flow key coverage (IPv6 + NAT)
Date: Fri, 18 Sep 2026 10:46:45 -0400 [thread overview]
Message-ID: <20260918144647.2024095-1-houminxi@gmail.com> (raw)
The merged IPv4 SCTP flow-key test covers only IPv4 and only the
plain forwarding path. This series adds SCTP over IPv6, and SCTP
across conntrack NAT (ovs_nat_update_key() rewrites L4 ports on the
recirculated skb). Patch 2 translates the destination port so that
SCTP branch is load-bearing; address-only NAT cannot tell a working
branch from a missing one.
Full OVS selftest suite is 19/19 OK on a freshly built kernel
(sctp_connect_v4, sctp_connect_v6, sctp_nat_connect_v4 included).
v5 restores the series title and patch 2 subject to the v1/v2 names.
I renamed them in v3 and v4; that was a mistake.
v1: https://lore.kernel.org/netdev/20260823020942.3101898-1-houminxi@gmail.com/
v2: https://lore.kernel.org/netdev/20260902125133.1828572-1-houminxi@gmail.com/
v3: https://lore.kernel.org/netdev/20260906165251.1176875-1-houminxi@gmail.com/
v4: https://lore.kernel.org/netdev/20260909122521.2687193-1-houminxi@gmail.com/
v2:
- rebase after net-next reopened (v1 was deferred while the tree was
closed). no code change.
v3:
- usage() tab alignment
- wait for the payload with ovs_wait instead of a bare grep
- CONFIG_NF_CT_PROTO_SCTP in the config fragment
- probe with ct(commit,nat) so kernels without NAT skip
- NAT translates the destination port (4443 -> 5555)
- commit messages: drop the INIT/DATA claim; point patch 2 at
ovs_nat_update_key()
v4:
- keyless ipv6(proto=132) install must be EINVAL 22
- wrap a few over-80 lines; checkpatch --strict clean
- rebase onto 548b86839f7f
v5:
- TEST_LIST descriptions sit at column 48 with the rest of the file;
shortened so expand -t 8 stays under 80
- skip the v6 test when socat has no WITH_IP6
- CONFIG_NF_NAT=m in the ovs fragment so the NAT test is not skipped
on the reference config
- CONFIG_NETFILTER_ADVANCED=y so CONFIG_NF_CT_PROTO_SCTP is visible
(it depends on ADVANCED; without it the symbol is dropped and the
NAT test skips)
Signed-off-by: Minxi Hou <houminxi@gmail.com>
Minxi Hou (2):
selftests/net/openvswitch: add SCTP flow key test over IPv6
selftests/net/openvswitch: add SCTP flow key test across conntrack NAT
.../testing/selftests/net/openvswitch/config | 3 +
.../selftests/net/openvswitch/openvswitch.sh | 202 ++++++++++++++++++
2 files changed, 205 insertions(+)
base-commit: 548b86839f7fb819a4d6c83b71c73ec378d24275
--
2.55.0
next reply other threads:[~2026-09-18 14:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 14:46 Minxi Hou [this message]
2026-09-18 14:46 ` [PATCH net-next v5 1/2] selftests/net/openvswitch: add SCTP flow key test over IPv6 Minxi Hou
2026-09-22 15:05 ` netdev-bot+sashiko
2026-09-23 12:31 ` Aaron Conole
2026-09-24 15:36 ` Jakub Kicinski
2026-09-28 12:37 ` Aaron Conole
2026-09-23 14:07 ` Minxi Hou
2026-09-26 19:26 ` Narcisa Vasile
2026-09-28 12:39 ` Aaron Conole
2026-09-18 14:46 ` [PATCH net-next v5 2/2] selftests/net/openvswitch: add SCTP flow key test across conntrack NAT Minxi Hou
2026-09-22 15:05 ` netdev-bot+sashiko
2026-09-23 12:33 ` Aaron Conole
2026-09-23 14:07 ` Minxi Hou
2026-09-26 20:02 ` Narcisa Vasile
2026-09-28 12:39 ` Aaron Conole
2026-09-28 23:30 ` [PATCH net-next v5 0/2] selftests: openvswitch: SCTP flow key coverage (IPv6 + NAT) patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260918144647.2024095-1-houminxi@gmail.com \
--to=houminxi@gmail.com \
--cc=aconole@redhat.com \
--cc=davem@davemloft.net \
--cc=dev@openvswitch.org \
--cc=echaudro@redhat.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=i.maximets@ovn.org \
--cc=kuba@kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox