[PATCH v6 1/2] net: macb: Poll for link state changes when using the internal PCS.

[Nathan Whitehorn <nwhitehorn@pa.msu.edu>]

When used with an offboard transceiver (e.g. an SFP), link state needs
to be measured at the PCS rather than an onboard PHY. Poll the link
state when the PCS is active to allow the kernel to detect link state
changes in this case.

Signed-off-by: Nathan Whitehorn <nwhitehorn@pa.msu.edu>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/net/ethernet/cadence/macb_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index b8234ac4b602..99e40b0ce804 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -1025,6 +1025,7 @@ static int macb_mii_probe(struct net_device *netdev)
 	struct macb *bp = netdev_priv(netdev);
 
 	bp->phylink_sgmii_pcs.ops = &macb_phylink_pcs_ops;
+	bp->phylink_sgmii_pcs.poll = true;
 	bp->phylink_usx_pcs.ops = &macb_phylink_usx_pcs_ops;
 
 	bp->phylink_config.dev = &netdev->dev;
-- 
2.43.0