From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@kernel.org, andrew+netdev@lunn.ch,
netdev@vger.kernel.org
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>,
florian.bezdeka@siemens.com, meng.ding@siemens.com, p@1g4.org,
tkusters@aweta.nl, jiayuan.chen@linux.dev, pulehui@huawei.com,
dima.ruinskiy@intel.com, raanan.avargil@intel.com,
gil.fine@intel.com, stable@vger.kernel.org,
Javier Herrera <javier.herrera@afronta.com>,
Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Subject: [PATCH net 6/6] e1000e: add system to disable K1 list
Date: Thu, 1 Oct 2026 15:24:39 -0700 [thread overview]
Message-ID: <20261001222443.3500206-7-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20261001222443.3500206-1-anthony.l.nguyen@intel.com>
Javier reports seeing packet loss issues related to the re-enablement
of K1; disabling it makes the issues go away. Add the reported system
to have K1 disabled by default.
Reproduction steps (from the Link):
Plug the cable and ping the default gateway on the LAN. No suspend/resume
involved, machine freshly booted and on AC power. Nothing e1000e-related in
dmesg apart from the link up/down messages; no "Hardware Unit Hang".
Default (K1 enabled):
$ ping -c 30 192.168.10.1
--- 192.168.10.1 ping statistics ---
30 packets transmitted, 18 received, 40% packet loss, time 29734ms
rtt min/avg/max/mdev = 0.211/0.315/0.384/0.046 ms
The lost packets are spread over the run (seq 6, 8, 9, 11, 13, 14, 16, 19,
20, 24, 25, 30), not a single burst. DHCP on this link also takes 1-2
minutes to get a lease, consistent with incoming packets being dropped.
With K1 disabled at runtime:
# ethtool --set-priv-flags enp0s31f6 disable-k1 on
$ ethtool --show-priv-flags enp0s31f6
Private flags for enp0s31f6:
s0ix-enabled: on
disable-k1 : on
$ ping -c 30 192.168.10.1
--- 192.168.10.1 ping statistics ---
30 packets transmitted, 30 received, 0% packet loss, time 29713ms
rtt min/avg/max/mdev = 0.169/0.251/0.468/0.054 ms
$ ping -c 30 192.168.10.1
--- 192.168.10.1 ping statistics ---
30 packets transmitted, 30 received, 0% packet loss, time 29677ms
rtt min/avg/max/mdev = 0.101/0.222/0.360/0.064 ms
I have only compile tested this, but Javier has tested that disabling K1
on his system (Lenovo ThinkPad P14s Gen 5 (Intel), I219-LM [8086:550a])
resolves his issues.
Cc: stable@vger.kernel.org
Fixes: 578294b8b60d ("e1000e: Reconfigure PLL clock gate timeout and re-enable K1 on Meteor Lake")
Reported-by: Javier Herrera <javier.herrera@afronta.com>
Link: https://lore.kernel.org/intel-wired-lan/CAKRuCQLWEcci9hPgNUmvq44Bd2H30T5_vP=exMjsknXMN5Yh9A@mail.gmail.com/
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index ad9b88c9af22..6f85dab5c55c 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -67,6 +67,13 @@ static const struct dmi_system_id disable_k1_list[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Dell Pro 16 Plus PB16250"),
},
},
+ {
+ .ident = "Lenovo ThinkPad P14s Gen 5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad P14s Gen 5"),
+ },
+ },
{}
};
--
2.47.1
next prev parent reply other threads:[~2026-10-01 22:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 22:24 [PATCH net 0/6][pull request] Intel Wired LAN Driver Updates 2026-10-01 (igc, igb, e1000e) Tony Nguyen
2026-10-01 22:24 ` [PATCH net 1/6] igc: Fix RX HW timestamp reporting when NET_RX_BUSY_POLL is disabled Tony Nguyen
2026-10-05 23:02 ` netdev-bot+sashiko
2026-10-08 1:57 ` Jakub Kicinski
2026-10-01 22:24 ` [PATCH net 2/6] igc: only strip RX timestamp header from first buffer Tony Nguyen
2026-10-05 23:02 ` netdev-bot+sashiko
2026-10-07 16:02 ` Paul Moses
2026-10-01 22:24 ` [PATCH net 3/6] igb: only strip Rx timestamp header on the first buffer of a frame Tony Nguyen
2026-10-05 23:02 ` netdev-bot+sashiko
2026-10-01 22:24 ` [PATCH net 4/6] e1000e: fix IRQ leak when request_irq() fails in e1000_request_msix() Tony Nguyen
2026-10-01 22:24 ` [PATCH net 5/6] e1000e: Fix out-of-bounds MMIO access by validating BAR0 size Tony Nguyen
2026-10-05 23:02 ` netdev-bot+sashiko
2026-10-01 22:24 ` Tony Nguyen [this message]
2026-10-01 22:29 ` [PATCH net 0/6][pull request] Intel Wired LAN Driver Updates 2026-10-01 (igc, igb, e1000e) netdev-bot+sinfo
2026-10-08 2:02 ` Jakub Kicinski
2026-10-08 17:04 ` Tony Nguyen
2026-10-08 2:10 ` patchwork-bot+netdevbpf
2026-10-08 2:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261001222443.3500206-7-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=aleksandr.loktionov@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=dima.ruinskiy@intel.com \
--cc=edumazet@kernel.org \
--cc=florian.bezdeka@siemens.com \
--cc=gil.fine@intel.com \
--cc=javier.herrera@afronta.com \
--cc=jiayuan.chen@linux.dev \
--cc=kuba@kernel.org \
--cc=meng.ding@siemens.com \
--cc=netdev@vger.kernel.org \
--cc=p@1g4.org \
--cc=pabeni@redhat.com \
--cc=pulehui@huawei.com \
--cc=raanan.avargil@intel.com \
--cc=stable@vger.kernel.org \
--cc=tkusters@aweta.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox