From: Johannes Berg <johannes@sipsolutions.net>
To: netdev@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Subject: [GIT PULL] wireless-2026-10-07
Date: Wed, 7 Oct 2026 22:49:59 +0200 [thread overview]
Message-ID: <20261007205143.464714-3-johannes@sipsolutions.net> (raw)
Hi,
So ... I pushed back as hard as I could, and Felix reduced
by ~25 patches, and I told everyone I need to get fixes much
earlier in the cycle.
Nevertheless, I ended up with 25 fixes (not counting merges).
Hope that's OK, otherwise we'll try to whittle it down more.
Please pull and let us know if there's any problem.
Thanks,
johannes
The following changes since commit d24e8ac715de2e16a53c144005b1863660a5fbea:
Merge tag 'net-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net (2026-10-01 06:41:59 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless.git tags/wireless-2026-10-07
for you to fetch changes up to 9727d1c4e1c971fc42b049b645fdda6852758835:
Revert "wifi: libertas: reject short monitor TX frames" (2026-10-07 22:48:10 +0200)
----------------------------------------------------------------
Some more fixes:
- ath12k: revert broken panic handler
- mt76: SAR/MLO/STA/NAPI fixes
- nxpwifi: race fixes, validation
- libertas: revert botched frame size fix
- brcmfmac: fix crash on P2P removal
- mac80211: fix WARN on downlink OFDMA frames
----------------------------------------------------------------
Aaron Ma (1):
wifi: mt76: mt7925: restore the legacy BSS after MLO teardown
Cristian Papa (1):
wifi: mt76: mt7603: initialize global station WCID
David Carlier (2):
wifi: nxpwifi: fix inverted check in Tx BA stream entry deletion
wifi: nxpwifi: do not delete Rx reorder entries under RCU
Devin Wittmayer (2):
wifi: mt76: mt7925: don't put the band auto marker in TGID
wifi: mt76: mt792x: pick the SAR table layout from the table itself
Felix Fietkau (4):
wifi: mt76: mt7996: program a link again if the driver holds it
wifi: mt76: mt7996: take over connection monitoring
wifi: mt76: account non-AQL frames per peer rather than per link
wifi: mt76: use ALTX queue for packets to disassociated stations
François Roux (1):
wifi: mac80211: don't estimate airtime for unsupported rate widths
Johannes Berg (4):
Merge tag 'mt76-fixes-2026-10-05' of https://github.com/nbd168/wireless
Merge tag 'nxpwifi-fixes-20261006-v2' of https://github.com/nxp-upstream/nxpwifi-next
Merge tag 'ath-current-20261006' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Revert "wifi: libertas: reject short monitor TX frames"
Junjie Cao (1):
wifi: mt76: mt792x: treat 0xff ACPI SAR entries as no limit
Linmao Li (7):
wifi: nxpwifi: protect sta_list against concurrent add and delete
wifi: nxpwifi: delete the station entry on the uAP deauth event
wifi: nxpwifi: wait for the wakeup timer before the adapter is freed
wifi: nxpwifi: free the aggregation buffer when the RA list disappears
wifi: nxpwifi: zero the channel statistics array
wifi: nxpwifi: fix the authentication frame length handling
wifi: nxpwifi: handle authentication frame allocation failures
Lu Huang (1):
wifi: mt76: mt7996: fix uninitialized buf read in mt7996_variant_fem_init()
Michele Dionisio (1):
wifi: brcmfmac: fix P2P device removal race in brcmf_detach()
Nicolas Cavallari (1):
wifi: mt76: mt7915: disable rx napi when removing device
Tao Gong (1):
wifi: mt76: mt7996: fix struct mt7996_mcu_wed_rro_ba_delete_event layout
Yingying Tang (1):
Revert "wifi: ath12k: add panic handler"
drivers/net/wireless/ath/ath12k/core.c | 33 +----
drivers/net/wireless/ath/ath12k/core.h | 3 -
drivers/net/wireless/ath/ath12k/hif.h | 9 --
drivers/net/wireless/ath/ath12k/pci.c | 8 --
.../wireless/broadcom/brcm80211/brcmfmac/core.c | 27 ++++-
drivers/net/wireless/marvell/libertas/tx.c | 7 --
drivers/net/wireless/mediatek/mt76/mt76.h | 7 ++
drivers/net/wireless/mediatek/mt76/mt7603/init.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 6 +
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 2 +
drivers/net/wireless/mediatek/mt76/mt7925/mac.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7925/main.c | 12 ++
.../net/wireless/mediatek/mt76/mt792x_acpi_sar.c | 134 ++++++++++++++-------
.../net/wireless/mediatek/mt76/mt792x_acpi_sar.h | 2 +
drivers/net/wireless/mediatek/mt76/mt7996/init.c | 3 +-
drivers/net/wireless/mediatek/mt76/mt7996/main.c | 10 +-
drivers/net/wireless/mediatek/mt76/mt7996/mcu.h | 3 +
drivers/net/wireless/mediatek/mt76/tx.c | 14 ++-
drivers/net/wireless/nxp/nxpwifi/11n.c | 2 +-
drivers/net/wireless/nxp/nxpwifi/11n_aggr.c | 1 +
drivers/net/wireless/nxp/nxpwifi/11n_rxreorder.c | 11 +-
drivers/net/wireless/nxp/nxpwifi/cfg80211.c | 31 +++--
drivers/net/wireless/nxp/nxpwifi/init.c | 2 +-
drivers/net/wireless/nxp/nxpwifi/main.c | 4 +-
drivers/net/wireless/nxp/nxpwifi/uap_event.c | 1 +
drivers/net/wireless/nxp/nxpwifi/util.c | 8 +-
net/mac80211/airtime.c | 18 +++
27 files changed, 230 insertions(+), 132 deletions(-)
next reply other threads:[~2026-10-07 20:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-07 20:49 Johannes Berg [this message]
2026-10-07 23:30 ` [GIT PULL] wireless-2026-10-07 patchwork-bot+netdevbpf
2026-10-07 23:32 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261007205143.464714-3-johannes@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox