From: Johannes Berg <johannes@sipsolutions.net>
To: netdev@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Subject: [GIT PULL] wireless-next-2026-10-07
Date: Wed, 7 Oct 2026 22:57:00 +0200 [thread overview]
Message-ID: <20261007205827.467974-3-johannes@sipsolutions.net> (raw)
Hi,
Nothing much going on in wireless-next. However, next time
I hope to land my RTNL-redux series which will (almost)
completely wean the wireless stack off the RTNL, except in
places where we need it for netdev register/unregister/etc.
I need to see what's going on with the per-netns mutex now,
can we already use that instead?
Please pull and let us know if there's any problem.
Thanks,
johannes
The following changes since commit f49defea7668d8c68ec19fa085ef3da6075561c7:
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net (2026-10-01 11:02:44 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git tags/wireless-next-2026-10-07
for you to fetch changes up to b6f009284138884c4b07bbef7b07d780aa9b5daf:
wifi: mac80211: use the AP address as RA for a 4-addr MLO station (2026-10-06 21:05:18 +0200)
----------------------------------------------------------------
Not too much going on:
- brcmfmac: plenty of improvements
- mac80211: NAN Instant Communications support
- iwlegacy: remove sysfs
- nxpwifi: IW610 support
- couple of fixes for recent regressions
----------------------------------------------------------------
Aamir Ahmed (1):
wifi: nxpwifi: validate variable IE lengths in beacon parser
Aaradhana Sahu (1):
wifi: mac80211: Do not report BSS parameters in AP station info
Aloka Dixit (2):
Revert "wifi: mac80211: do not use old MBSSID elements"
wifi: mac80211: remove redundant null check in ieee80211_assign_beacon()
Andrei-Alexandru Bleortu (1):
wifi: mac80211: keep the BSS color while a color change is pending
Benjamin Drung (2):
wifi: brcmfmac: Add per-board clm_blob firmware binaries
wifi: brcmfmac: Add clm_blob firmware for brcmfmac43456-sdio
Dan Carpenter (3):
wifi: b43: don't pass unterminated string to sscanf()
wifi: b43legacy: debugfs: NUL terminate string in debugfs
wifi: carl9170: NUL terminate string in debugfs
Dominic White (1):
wifi: cfg80211: allow zero HE OBSS PD offsets
Felix Fietkau (2):
wifi: mac80211_hwsim: reserve headroom for software encryption
wifi: mac80211: use the AP address as RA for a 4-addr MLO station
Girish Rudrappa (1):
wifi: brcmfmac: Set extsae_pwe parameter to Infineon firmware in SAP mode
Heyang Tan (2):
wifi: nxpwifi: bound histogram debugfs output
wifi: nxpwifi: bound debug info output
Huang Xiangping (1):
wifi: cfg80211: process pending events before connect/disconnect requests
Ilan Peer (11):
wifi: cfg80211: nan: add Instant Communication support
wifi: mac80211: nan: Update NAN configuration copy
wifi: cfg80211: nan: check Rx registration for NAN beacons
wifi: cfg80211: do not use NAN beacons to update the BSS table
wifi: mac80211: nan: allow Rx registration for NAN beacons
wifi: mac80211: accept NAN beacons only when IC is enabled
wifi: ieee80211: add NAN service ID list attribute definitions
wifi: mac80211_hwsim: nan: use ieee80211_is_nan_beacon() helper
wifi: mac80211_hwsim: nan: prepare for more configurable NAN settings
wifi: mac80211_hwsim: nan: Handle more of the NAN configuration
wifi: mac80211_hwsim: add NAN Instant Communication support
Janne Grunau (1):
wifi: brcmfmac: cfg80211: Report port_authorized for 4-way HS offload
Jeff Chen (6):
mmc: sdio: add NXP IW610 device ID
mmc: core: add NXP IW610 base ID and block size quirk
wifi: nxpwifi: Add support for SDIO-based IW610
wifi: nxpwifi: Limit channel width based on firmware capability
wifi: nxpwifi: fix return value check in change_vif_to_sta/ap
wifi: nxpwifi: fix missing error codes in _nxpwifi_fw_dpc()
Johannes Berg (7):
wifi: mac80211: fix TPE in channel switch wrapper parsing
wifi: ieee80211: type-check (extended) element functions
wifi: cfg80211: add protected TWT assoc flag
wifi: mac80211: fix and clean up protected TWT support
wifi: mac80211: set SP in reg connectivity with any channel
Merge tag 'nxpwifi-next-20260929-v3' of https://github.com/nxp-upstream/nxpwifi-next
wifi: mac80211: fix non-MLD link ID handling
Manish Dharanenthiran (1):
wifi: mac80211: Guard FILS discovery and unsolicited broadcast probe response
Nathan Chancellor (1):
wifi: brcmsmac: Adjust txpwrindex value in nphy_ipa_rxcal_gaintbl_2GHz
Pengpeng Hou (1):
wifi: brcmfmac: bound NVRAM comment parsing
Raj Ojha (1):
wifi: mac80211: acquire wiphy lock for unlisted sdata teardown
Sebastian Reichel (1):
wifi: brcmfmac: Improve D3 substate entering timeout handling
Stanislaw Gruszka (3):
wifi: iwlegacy: set debug level using debugfs
wifi: iwlegacy: 4965: remove custom sysfs files
wifi: iwlegacy: 3945: remove custom sysfs files
Vinícius Ramon Fontanela (1):
wifi: brcmfmac: allow ISO3166 fallback for BCM4350
drivers/mmc/core/quirks.h | 3 +
drivers/net/wireless/ath/carl9170/debug.c | 5 +-
drivers/net/wireless/broadcom/b43/debugfs.c | 2 +-
drivers/net/wireless/broadcom/b43legacy/debugfs.c | 2 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 98 ++++-
.../broadcom/brcm80211/brcmfmac/cyw/core.c | 6 +
.../broadcom/brcm80211/brcmfmac/firmware.c | 13 +-
.../wireless/broadcom/brcm80211/brcmfmac/fwvid.h | 11 +
.../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 10 +-
.../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 3 +-
.../broadcom/brcm80211/brcmsmac/phy/phy_n.c | 2 +-
drivers/net/wireless/intel/iwlegacy/3945-mac.c | 441 +--------------------
drivers/net/wireless/intel/iwlegacy/4965-mac.c | 121 ------
drivers/net/wireless/intel/iwlegacy/debug.c | 3 +
drivers/net/wireless/intel/iwlwifi/mld/iface.c | 4 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 3 +-
drivers/net/wireless/nxp/nxpwifi/11ax.c | 2 +
drivers/net/wireless/nxp/nxpwifi/11n.c | 4 +-
drivers/net/wireless/nxp/nxpwifi/cfg80211.c | 6 +-
drivers/net/wireless/nxp/nxpwifi/debugfs.c | 31 +-
drivers/net/wireless/nxp/nxpwifi/fw.h | 2 +
drivers/net/wireless/nxp/nxpwifi/main.c | 15 +-
drivers/net/wireless/nxp/nxpwifi/scan.c | 18 +
drivers/net/wireless/nxp/nxpwifi/sdio.c | 16 +
drivers/net/wireless/nxp/nxpwifi/sdio.h | 1 +
drivers/net/wireless/nxp/nxpwifi/util.c | 43 +-
drivers/net/wireless/nxp/nxpwifi/util.h | 1 +
drivers/net/wireless/virtual/mac80211_hwsim_main.c | 8 +-
drivers/net/wireless/virtual/mac80211_hwsim_nan.c | 245 ++++++++++--
drivers/net/wireless/virtual/mac80211_hwsim_nan.h | 7 +
include/linux/ieee80211-nan.h | 28 ++
include/linux/ieee80211.h | 17 +-
include/linux/mmc/sdio_ids.h | 2 +
include/net/cfg80211.h | 28 +-
include/net/mac80211.h | 4 +-
include/uapi/linux/nl80211.h | 17 +
net/mac80211/cfg.c | 35 +-
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/iface.c | 26 +-
net/mac80211/main.c | 7 +-
net/mac80211/mlme.c | 23 +-
net/mac80211/parse.c | 5 +-
net/mac80211/rx.c | 20 +-
net/mac80211/sta_info.c | 49 ++-
net/mac80211/tx.c | 4 +-
net/mac80211/util.c | 4 +-
net/wireless/core.c | 12 +
net/wireless/nl80211.c | 36 +-
net/wireless/scan.c | 9 +-
net/wireless/sme.c | 14 +
50 files changed, 729 insertions(+), 738 deletions(-)
next reply other threads:[~2026-10-07 20:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-07 20:57 Johannes Berg [this message]
2026-10-07 23:36 ` [GIT PULL] wireless-next-2026-10-07 Jakub Kicinski
2026-10-08 2:05 ` Kuniyuki Iwashima
2026-10-08 7:44 ` Johannes Berg
2026-10-08 15:01 ` Johannes Berg
2026-10-09 21:24 ` Kuniyuki Iwashima
2026-10-07 23:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261007205827.467974-3-johannes@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox