Netdev List
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
	edumazet@kernel.org, andrew+netdev@lunn.ch,
	netdev@vger.kernel.org
Cc: Maciek Machnikowski <maciej.machnikowski@intel.com>,
	anthony.l.nguyen@intel.com, jacob.e.keller@intel.com,
	przemyslaw.korba@intel.com, grzegorz.nitka@intel.com,
	sergey.temerkhanov@intel.com, arkadiusz.kubalewski@intel.com,
	poros@redhat.com, richardcochran@gmail.com, horms@kernel.org,
	Paul Menzel <pmenzel@molgen.mpg.de>,
	Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
	Alexander Nowlin <alexander.nowlin@intel.com>
Subject: [PATCH net v2 15/15] ice: Recalibrate PHY after settime64 on E825-C
Date: Thu,  8 Oct 2026 14:56:12 -0700	[thread overview]
Message-ID: <20261008215614.1987250-16-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20261008215614.1987250-1-anthony.l.nguyen@intel.com>

From: Maciek Machnikowski <maciej.machnikowski@intel.com>

The PHY on E825-C requires recalibration after large jumps of the
system time. This step is required and is done for E822 devices
previously, but was accidentally skipped due to oversight when
E825-C support was added.

Lack of recalibration will fail to converge quickly as the effective
adjustment requested is not applied properly to the PHY timestamps,
so the readings from the timestamp are incorrect.

Without the fix:
> ptp4l[12591.505]: port 1 (eno8303np0): SLAVE to UNCALIBRATED on SYNCHRONIZATION_FAULT
> ptp4l[12591.951]: port 1 (eno8303np0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
> ptp4l[12592.027]: rms 752851973 max 1102277559 freq -84408798 +/- 53560133 delay  6009 +/- 92308
> ptp4l[12593.038]: rms 91302045 max 136894784 freq +100000000 +/-   0 delay 93700 +/- 24153
> ptp4l[12594.050]: rms 16036314 max 35711594 freq +47433070 +/- 46746070 delay 44899 +/- 45255
> ptp4l[12595.061]: rms 5558880 max 12292103 freq -13092285 +/- 6627317 delay -13499 +/- 6560
> ptp4l[12596.073]: rms 759533 max 1081638 freq +837063 +/- 802691 delay   711 +/- 979
> ptp4l[12597.085]: rms 60485 max 106800 freq +146706 +/- 263535 delay   145 +/- 263
> ptp4l[12598.096]: rms 16428 max 41896 freq -46707 +/- 34325 delay   -40 +/-  34
> ptp4l[12599.108]: rms 3049 max 5356 freq  +5337 +/- 1730 delay     7 +/-   2
> ptp4l[12600.120]: rms  284 max  381 freq   +104 +/- 759 delay     2 +/-   1
> ptp4l[12601.131]: rms   42 max  119 freq   -124 +/- 143 delay     2 +/-   0
> ptp4l[12602.144]: rms   11 max   25 freq    +39 +/-  12 delay     3 +/-   0
> ptp4l[12603.156]: rms    2 max    4 freq    +14 +/-   5 delay     3 +/-   0
> ptp4l[12604.167]: rms    1 max    3 freq    +15 +/-   5 delay     2 +/-   0
> ptp4l[12605.179]: rms    1 max    4 freq    +16 +/-   5 delay     2 +/-   1
> ptp4l[12606.191]: rms    1 max    3 freq    +15 +/-   5 delay     3 +/-   0

With the fix:
> ptp4l[12834.266]: rms 27178238388098 max 30079328952737 freq +479164 +/- 1040869 delay     5 +/-   1
> ptp4l[12834.522]: port 1 (eno8703np0): minimum delay request interval 2^-8
> ptp4l[12835.315]: rms 86919 max 139746 freq +111289 +/- 539214 delay   -35 +/-  28
> ptp4l[12836.376]: rms 5415 max 8884 freq   +579 +/- 22798 delay     4 +/-   5
> ptp4l[12837.429]: rms  335 max  559 freq   -305 +/- 842 delay     4 +/-   1
> ptp4l[12838.471]: rms   20 max   45 freq    +79 +/-  33 delay     4 +/-   0
> ptp4l[12839.512]: rms    2 max    5 freq    +44 +/-   8 delay     4 +/-   0
> ptp4l[12840.545]: rms    1 max    4 freq    +46 +/-   8 delay     4 +/-   0
> ptp4l[12841.586]: rms    1 max    3 freq    +46 +/-   7 delay     4 +/-   0
> ptp4l[12842.637]: rms    1 max    3 freq    +46 +/-   7 delay     4 +/-   0

Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Maciek Machnikowski <maciej.machnikowski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ptp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index 8d302b500a39..a5fe05d70461 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -2086,8 +2086,9 @@ ice_ptp_settime64(struct ptp_clock_info *info, const struct timespec64 *ts)
 	/* Reenable periodic outputs */
 	ice_ptp_enable_all_perout(pf);
 
-	/* Recalibrate and re-enable timestamp blocks for E822/E823 */
-	if (hw->mac_type == ICE_MAC_GENERIC)
+	/* Recalibrate and re-enable timestamp blocks for E822/E823/E825-C */
+	if (hw->mac_type == ICE_MAC_GENERIC ||
+	    hw->mac_type == ICE_MAC_GENERIC_3K_E825)
 		ice_ptp_restart_all_phy(pf);
 exit:
 	if (err) {
-- 
2.47.1


      parent reply	other threads:[~2026-10-08 21:57 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-08 21:55 [PATCH net v2 00/15][pull request] ice: E82x: timestamp processing logic fixes Tony Nguyen
2026-10-08 21:55 ` [PATCH net v2 01/15] ice: fix removal of PTP timestamp tracker during reset Tony Nguyen
2026-10-08 21:55 ` [PATCH net v2 02/15] ice: use reference counting and SRCU for PTP port access Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 03/15] ice: fix PHY port restart serialization Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 04/15] ice: set in_use only after preparing Tx timestamp index Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 05/15] ice: call PTP link change only from link events Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 06/15] ice: E822: keep Tx timestamps disabled during offset calibration Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 07/15] ice: E822: cancel offset verification work during reset preparation Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 08/15] ice: E825: stop clearing PHY_REG_TX_OFFSET_READY Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 09/15] ice: E825: clear PHY_REG_TX_MEMORY_STATUS prior to soft reset Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 10/15] ice: E825: perform a soft reset when starting the PHY timer Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 11/15] ice: wait for in-flight Tx timestamps before flushing the tracker Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 12/15] ice: keep Tx timestamp slots tracked until completion or timeout Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 13/15] ice: skip reading Tx ready bitmap on ports with no timestamps Tony Nguyen
2026-10-08 21:56 ` [PATCH net v2 14/15] ice: don't clear in_use until HW clears ready bitmap Tony Nguyen
2026-10-08 21:56 ` Tony Nguyen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261008215614.1987250-16-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=aleksandr.loktionov@intel.com \
    --cc=alexander.nowlin@intel.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=arkadiusz.kubalewski@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=grzegorz.nitka@intel.com \
    --cc=horms@kernel.org \
    --cc=jacob.e.keller@intel.com \
    --cc=kuba@kernel.org \
    --cc=maciej.machnikowski@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pmenzel@molgen.mpg.de \
    --cc=poros@redhat.com \
    --cc=przemyslaw.korba@intel.com \
    --cc=richardcochran@gmail.com \
    --cc=sergey.temerkhanov@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox