From: Jiawen Wu <jiawenwu@trustnetic.com>
To: netdev@vger.kernel.org
Cc: "Mengyuan Lou" <mengyuanlou@net-swift.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@kernel.org>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
"Jacob Keller" <jacob.e.keller@intel.com>,
"Kees Cook" <kees@kernel.org>,
"Chenguang Zhao" <zhaochenguang@kylinos.cn>,
"Aleksandr Loktionov" <aleksandr.loktionov@intel.com>,
"Uwe Kleine-König (The Capable Hub)"
<u.kleine-koenig@baylibre.com>,
"Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
"Maciej Fijalkowski" <maciej.fijalkowski@intel.com>,
"Simon Horman" <horms@kernel.org>,
"Jiawen Wu" <jiawenwu@trustnetic.com>
Subject: [PATCH net v3 1/3] net: wangxun: keep NGBE OCP cards MAC enabled
Date: Tue, 13 Oct 2026 10:06:24 +0800 [thread overview]
Message-ID: <20261013020626.5548-3-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20261013020626.5548-1-jiawenwu@trustnetic.com>
OCP mezzanine cards are NCSI capable by design, so the NCSI semantics do
apply to them, and they need the MAC receiver to keep running for
out-of-band management. The inline test does not cover the OCP card
type, so on such a card that does not have the NCSI bit set the receiver
was turned off on every path reaching wx_disable_rx(), and management
traffic was dropped.
'wx->ncsi_enabled' is the correct value for NGBE to determine whether
MAC RX/TX should be kept enabled. Use 'wx->ncsi_enabled' instead of
open-coding the subsystem ID check, and initialize it for txgbe as well
so that both drivers share the same condition. No functional change for
TXGBE.
Fixes: 02338c484ab6 ("net: ngbe: Initialize sw info and register netdev")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ethernet/wangxun/libwx/wx_hw.c | 2 +-
drivers/net/ethernet/wangxun/txgbe/txgbe_main.c | 4 +++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
index 113552586be70..1c0c59436890f 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c
+++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
@@ -1313,7 +1313,7 @@ void wx_disable_rx(struct wx *wx)
rxctrl &= ~WX_RDB_PB_CTL_RXEN;
wr32(wx, WX_RDB_PB_CTL, rxctrl);
- if (!(((wx->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) ||
+ if (!(wx->ncsi_enabled ||
((wx->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) {
/* disable mac receiver */
wr32m(wx, WX_MAC_RX_CFG,
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index eb91c4f28ecd4..a60a711e8e1b4 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -267,7 +267,7 @@ static void txgbe_disable_device(struct wx *wx)
wx_set_all_vfs(wx);
}
- if (!(((wx->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) ||
+ if (!(wx->ncsi_enabled ||
((wx->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) {
/* disable mac transmiter */
wr32m(wx, WX_MAC_TX_CFG, WX_MAC_TX_CFG_TE, 0);
@@ -381,6 +381,8 @@ static void txgbe_init_type_code(struct wx *wx)
wx->media_type = wx_media_unknown;
break;
}
+
+ wx->ncsi_enabled = ((wx->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP);
}
/**
--
2.51.0
next prev parent reply other threads:[~2026-10-13 2:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 2:06 [PATCH net v3 0/3] net: wangxun: keep MAC enabled for NCSI devices Jiawen Wu
2026-10-13 2:06 ` [PATCH v3 1/3] net: libwx: keep NGBE OCP cards MAC enabled Jiawen Wu
2026-10-13 2:09 ` netdev-bot+sinfo
2026-10-13 2:13 ` Jiawen Wu
2026-10-13 2:06 ` Jiawen Wu [this message]
2026-10-13 2:06 ` [PATCH net v3 2/3] net: txgbe: keep MAC enabled for SP devices that support NCSI Jiawen Wu
2026-10-13 2:06 ` [PATCH net v3 3/3] net: txgbe: keep MAC enabled for AML " Jiawen Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261013020626.5548-3-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=aleksandr.loktionov@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=horms@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=kees@kernel.org \
--cc=kuba@kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maciej.fijalkowski@intel.com \
--cc=mengyuanlou@net-swift.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=u.kleine-koenig@baylibre.com \
--cc=zhaochenguang@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox