[net-next,PATCH] net/fsl: xgmac_mdio: Add missing newlines to error prints

[Marek Vasut <marex@nabladev.com>]

Add missing newlines at the end of debug prints.

Fixes: dd8f467eda72 ("net/fsl: xgmac_mdio: Support setting the MDC frequency")
Signed-off-by: Marek Vasut <marex@nabladev.com>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Eric Dumazet <edumazet@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Wei Fang <wei.fang@nxp.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/freescale/xgmac_mdio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index 65dc07d0df0fc..c7df633050683 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -336,13 +336,13 @@ static int xgmac_mdio_set_mdc_freq(struct mii_bus *bus)
 
 	priv->enet_clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(priv->enet_clk)) {
-		dev_err(dev, "Input clock unknown, not changing MDC frequency");
+		dev_err(dev, "Input clock unknown, not changing MDC frequency\n");
 		return PTR_ERR(priv->enet_clk);
 	}
 
 	div = ((clk_get_rate(priv->enet_clk) / priv->mdc_freq) - 1) / 2;
 	if (div < 5 || div > 0x1ff) {
-		dev_err(dev, "Requested MDC frequency is out of range, ignoring");
+		dev_err(dev, "Requested MDC frequency is out of range, ignoring\n");
 		return -EINVAL;
 	}
 
-- 
2.53.0