From: Binbin Deng <18983559317@163.com>
To: sam@mendozajonas.com, fercerpav@gmail.com, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
horms@kernel.org, gwshan@linux.vnet.ibm.com, joel@jms.id.au
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Binbin Deng <18983559317@163.com>
Subject: [PATCH net v1] net/ncsi: fix use-after-free of ncsi_channel in ncsi_remove_channel()
Date: Sat, 17 Oct 2026 10:39:34 +0800 [thread overview]
Message-ID: <20261017023934.419611-1-18983559317@163.com> (raw)
The NCSI generic netlink package information paths walk the global
ncsi_dev_list (ndp_from_ifindex() -> ncsi_find_dev()) and the
ndp->packages / np->channels lists through the list_for_each_entry_rcu()
based NCSI_FOR_EACH_* macros, but they never enter an RCU read-side
critical section. Everything these walkers touch is only unlinked with
list_del_rcu(), so the lifetime contract of the objects is "alive for an
RCU grace period after unlink"; a walker that does not hold
rcu_read_lock() has no protection at all once it is preempted mid-walk,
no matter what the free side does.
The teardown side breaks the other half of that contract for the
channels: ncsi_remove_channel() unlinks the channel from its package's
channel list with list_del_rcu() and then frees the channel's mac/vlan
filter arrays and the channel object itself immediately. The netlink
walkers dereference deep into the channel --
ncsi_write_channel_info() reads nc->version.fw_name with nla_put_string()
(strlen) and iterates the nc->vlan_filter.vids[] entries -- so a reader
mid-walk reads freed memory when a teardown overlaps it.
Either half alone leaves the race, so fix both sides:
* Enter the read-side critical section in the NCSI_CMD_PKG_INFO doit
(ncsi_pkg_info_nl()) and dump (ncsi_pkg_info_all_nl()) handlers and
keep it held across every dereference of ndp, np and nc. The doit
response skb is allocated before the lock is taken so that the
GFP_KERNEL allocation does not run under rcu_read_lock(); the dump
handler only appends to the callback skb it is given and can hold
the lock across its whole walk.
* Move the frees of nc->mac_filter.addrs, nc->vlan_filter.vids and nc
into an RCU callback. The two arrays are only reachable through
the channel object, so they have to share its grace period.
The race needs no real NC hardware:
writer: rmmod ftgmac100
-> ftgmac100_remove() -> ncsi_unregister_dev()
-> ncsi_remove_package() -> ncsi_remove_channel() -> kfree()
reader: sendmsg(NETLINK_GENERIC, NCSI_CMD_PKG_INFO)
-> ncsi_pkg_info_nl() -> ncsi_write_package_info()
-> ncsi_write_channel_info()
(freeing happens before unregister_netdev(), so the netdev, and with it
the genl entry point, stays reachable during the whole window).
Tested on an arm multi_v7 kernel (KASAN + SLUB + PREEMPT) running as a
QEMU ast2600-evb guest with a host-side NC-SI responder; the PoC hammers
NCSI_CMD_PKG_INFO from four threads while cycling insmod/rmmod
ftgmac100 (doit and dump variants in parallel). KASAN fires at the
first teardown of every boot:
BUG: KASAN: slab-use-after-free in ncsi_write_package_info+0xa5c/0xf84
Read of size 1 at addr c69019e0 by task poc_dump/68
CPU: 0 UID: 0 PID: 68 Comm: poc_dump Not tainted 7.2.6 #1 PREEMPT
Hardware name: Generic DT based system
Call trace:
...
kasan_report from ncsi_write_package_info+0xa5c/0xf84
ncsi_write_package_info from ncsi_pkg_info_nl+0x320/0x63c
ncsi_pkg_info_nl from genl_family_rcv_msg_doit+0x218/0x2d8
genl_family_rcv_msg_doit from genl_rcv_msg+0x578/0xb24
genl_rcv_msg from netlink_rcv_skb+0x134/0x3c4
netlink_rcv_skb from genl_rcv+0x24/0x34
genl_rcv from netlink_unicast+0x884/0xac0
netlink_unicast from netlink_sendmsg+0x62c/0xb98
netlink_sendmsg from __sys_sendto+0x290/0x3e0
__sys_sendto from sys_send+0x18/0x20
sys_send from ret_fast_syscall+0x0/0x5c
Fixes: 2d283bdd079c ("net/ncsi: Resource management")
Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Binbin Deng <18983559317@163.com>
---
net/ncsi/internal.h | 1 +
net/ncsi/ncsi-manage.c | 20 ++++++++++++++------
net/ncsi/ncsi-netlink.c | 36 ++++++++++++++++++++++++++----------
3 files changed, 41 insertions(+), 16 deletions(-)
diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index adee6dcabdc3..530834d8caa7 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -239,6 +239,7 @@ struct ncsi_channel {
} monitor;
struct list_head node;
struct list_head link;
+ struct rcu_head rcu;
};
struct ncsi_package {
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 54d0df0a9efe..c16047dee3f8 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -242,17 +242,21 @@ struct ncsi_channel *ncsi_add_channel(struct ncsi_package *np, unsigned char id)
return nc;
}
+static void ncsi_channel_release(struct rcu_head *rcu)
+{
+ struct ncsi_channel *nc = container_of(rcu, struct ncsi_channel, rcu);
+
+ kfree(nc->mac_filter.addrs);
+ kfree(nc->vlan_filter.vids);
+ kfree(nc);
+}
+
static void ncsi_remove_channel(struct ncsi_channel *nc)
{
struct ncsi_package *np = nc->package;
unsigned long flags;
spin_lock_irqsave(&nc->lock, flags);
-
- /* Release filters */
- kfree(nc->mac_filter.addrs);
- kfree(nc->vlan_filter.vids);
-
nc->state = NCSI_CHANNEL_INACTIVE;
spin_unlock_irqrestore(&nc->lock, flags);
ncsi_stop_channel_monitor(nc);
@@ -263,7 +267,11 @@ static void ncsi_remove_channel(struct ncsi_channel *nc)
np->channel_num--;
spin_unlock_irqrestore(&np->lock, flags);
- kfree(nc);
+ /* Readers (netlink package info walkers, channel configuration
+ * worker) may still hold the channel or its filter arrays;
+ * release everything after a grace period.
+ */
+ call_rcu(&nc->rcu, ncsi_channel_release);
}
struct ncsi_package *ncsi_find_package(struct ncsi_dev_priv *ndp,
diff --git a/net/ncsi/ncsi-netlink.c b/net/ncsi/ncsi-netlink.c
index 8cc538358f6a..3de607f6982c 100644
--- a/net/ncsi/ncsi-netlink.c
+++ b/net/ncsi/ncsi-netlink.c
@@ -169,11 +169,6 @@ static int ncsi_pkg_info_nl(struct sk_buff *msg, struct genl_info *info)
if (!info->attrs[NCSI_ATTR_PACKAGE_ID])
return -EINVAL;
- ndp = ndp_from_ifindex(genl_info_net(info),
- nla_get_u32(info->attrs[NCSI_ATTR_IFINDEX]));
- if (!ndp)
- return -ENODEV;
-
skb = genlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!skb)
return -ENOMEM;
@@ -192,7 +187,21 @@ static int ncsi_pkg_info_nl(struct sk_buff *msg, struct genl_info *info)
kfree_skb(skb);
return -EMSGSIZE;
}
+ /* The device is resolved and the lists are walked inside an RCU
+ * read-side critical section: the teardown path only unlinks these
+ * objects and frees them after a grace period.
+ */
+ rcu_read_lock();
+ ndp = ndp_from_ifindex(genl_info_net(info),
+ nla_get_u32(info->attrs[NCSI_ATTR_IFINDEX]));
+ if (!ndp) {
+ rcu_read_unlock();
+ kfree_skb(skb);
+ return -ENODEV;
+ }
+
rc = ncsi_write_package_info(skb, ndp, package_id);
+ rcu_read_unlock();
if (rc) {
nla_nest_cancel(skb, attr);
@@ -228,20 +237,26 @@ static int ncsi_pkg_info_all_nl(struct sk_buff *skb,
if (!attrs[NCSI_ATTR_IFINDEX])
return -EINVAL;
+ package_id = cb->args[0];
+
+ rcu_read_lock();
ndp = ndp_from_ifindex(get_net(sock_net(skb->sk)),
nla_get_u32(attrs[NCSI_ATTR_IFINDEX]));
- if (!ndp)
+ if (!ndp) {
+ rcu_read_unlock();
return -ENODEV;
+ }
- package_id = cb->args[0];
package = NULL;
NCSI_FOR_EACH_PACKAGE(ndp, np)
if (np->id == package_id)
package = np;
- if (!package)
+ if (!package) {
+ rcu_read_unlock();
return 0; /* done */
+ }
hdr = genlmsg_put(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq,
&ncsi_genl_family, NLM_F_MULTI, NCSI_CMD_PKG_INFO);
@@ -265,9 +280,10 @@ static int ncsi_pkg_info_all_nl(struct sk_buff *skb,
genlmsg_end(skb, hdr);
cb->args[0] = package_id + 1;
-
+ rcu_read_unlock();
return skb->len;
err:
+ rcu_read_unlock();
genlmsg_cancel(skb, hdr);
return rc;
}
--
2.43.0
next reply other threads:[~2026-10-17 2:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-17 2:39 Binbin Deng [this message]
2026-10-17 2:44 ` [PATCH net v1] net/ncsi: fix use-after-free of ncsi_channel in ncsi_remove_channel() netdev-bot+sinfo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261017023934.419611-1-18983559317@163.com \
--to=18983559317@163.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fercerpav@gmail.com \
--cc=gwshan@linux.vnet.ibm.com \
--cc=horms@kernel.org \
--cc=joel@jms.id.au \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sam@mendozajonas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox