Netdev List
 help / color / mirror / Atom feed
From: Carlo Szelinsky <github@szelinsky.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>,
	Kory Maincent <kory.maincent@bootlin.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Piotr Kubik <piotr.kubik@adtran.com>,
	Sai Krishna <saikrishnag@marvell.com>,
	Simon Horman <horms@kernel.org>,
	Kyle Swenson <kyle.swenson@est.tech>,
	netdev-bot+sashiko@kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Carlo Szelinsky <github@szelinsky.de>
Subject: [PATCH net 04/10] net: pse-pd: do not reach a freed PHY from the notification worker
Date: Sun, 18 Oct 2026 10:23:07 +0200	[thread overview]
Message-ID: <20261018082314.48950-5-github@szelinsky.de> (raw)
In-Reply-To: <20261018082314.48950-1-github@szelinsky.de>

The notification worker holds a reference on the pse_control, but not
on the PHY that psec->attached_phydev points to. If the PHY is removed
while the worker runs, the pse_control survives and the worker reads the
freed PHY. The same happens without a race when two PHYs share one PI:
attached_phydev keeps pointing at the first PHY after it is removed.

pse_control_put() unlinks and frees a pse_control under pse_list_mutex,
and phy_device_remove() calls it before the PHY is freed. So instead of
taking a reference, let the worker look the pse_control up and use
attached_phydev under pse_list_mutex. This nests pse_list_mutex inside
rtnl; nothing under pse_list_mutex takes rtnl.

For a PI shared by two PHYs there is no single netdev to report to, so
clear attached_phydev when a second PHY takes the pse_control, and warn.
Events for that PI are then no longer reported, even after one PHY goes
away. Failing the second PHY instead would fail its whole MDIO bus.

Fixes: fa2f0454174c ("net: pse-pd: Introduce attached_phydev to pse control")
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
---
 drivers/net/pse-pd/pse_core.c | 42 ++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 11 deletions(-)

diff --git a/drivers/net/pse-pd/pse_core.c b/drivers/net/pse-pd/pse_core.c
index 65a41c517b35..336f00d82b5f 100644
--- a/drivers/net/pse-pd/pse_core.c
+++ b/drivers/net/pse-pd/pse_core.c
@@ -238,24 +238,22 @@ static int of_load_pse_pis(struct pse_controller_dev *pcdev)
  * @pcdev: a pointer to the PSE
  * @id: index of the PSE control
  *
- * Return: pse_control pointer or NULL. The device returned has had a
- *	   reference added and the pointer is safe until the user calls
- *	   pse_control_put() to indicate they have finished with it.
+ * Must be called with pse_list_mutex held. No reference is taken: the
+ * pointer is only valid until pse_list_mutex is released.
+ *
+ * Return: pse_control pointer or NULL.
  */
 static struct pse_control *
 pse_control_find_by_id(struct pse_controller_dev *pcdev, int id)
 {
 	struct pse_control *psec;
 
-	mutex_lock(&pse_list_mutex);
+	lockdep_assert_held(&pse_list_mutex);
+
 	list_for_each_entry(psec, &pcdev->pse_control_head, list) {
-		if (psec->id == id) {
-			kref_get(&psec->refcnt);
-			mutex_unlock(&pse_list_mutex);
+		if (psec->id == id)
 			return psec;
-		}
 	}
-	mutex_unlock(&pse_list_mutex);
 	return NULL;
 }
 
@@ -268,6 +266,7 @@ pse_control_find_by_id(struct pse_controller_dev *pcdev, int id)
 static struct net_device *pse_control_get_netdev(struct pse_control *psec)
 {
 	ASSERT_RTNL();
+	lockdep_assert_held(&pse_list_mutex);
 
 	if (!psec || !psec->attached_phydev)
 		return NULL;
@@ -1020,13 +1019,21 @@ static void pse_send_ntf_worker(struct work_struct *work)
 		struct net_device *netdev;
 		struct pse_control *psec;
 
-		psec = pse_control_find_by_id(pcdev, ntf.id);
+		/* A pse_control is only on the list while the PHY it was
+		 * handed to holds it: the PHY's pse_control_put() unlinks
+		 * and frees it under pse_list_mutex before the PHY itself
+		 * can be freed. Holding the mutex across the lookup and the
+		 * attached_phydev dereference therefore keeps the PHY alive,
+		 * which a reference on the pse_control alone would not.
+		 */
 		rtnl_lock();
+		mutex_lock(&pse_list_mutex);
+		psec = pse_control_find_by_id(pcdev, ntf.id);
 		netdev = pse_control_get_netdev(psec);
 		if (netdev)
 			ethnl_pse_send_ntf(netdev, ntf.notifs);
+		mutex_unlock(&pse_list_mutex);
 		rtnl_unlock();
-		pse_control_put(psec);
 	}
 }
 
@@ -1417,6 +1424,19 @@ pse_control_get_internal(struct pse_controller_dev *pcdev, unsigned int index,
 
 	list_for_each_entry(psec, &pcdev->pse_control_head, list) {
 		if (psec->id == index) {
+			/* attached_phydev can only name one PHY. If a second
+			 * one shares the PI, either may be removed first and
+			 * leave it pointing at a freed phy_device, so stop
+			 * reporting events for this PI instead.
+			 */
+			if (psec->attached_phydev &&
+			    psec->attached_phydev != phydev) {
+				dev_warn(pcdev->dev,
+					 "PI %u shared by several PHYs, not reporting its events\n",
+					 index);
+				psec->attached_phydev = NULL;
+			}
+
 			kref_get(&psec->refcnt);
 			return psec;
 		}
-- 
2.43.0


  parent reply	other threads:[~2026-10-18  8:23 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-18  8:23 [PATCH net 00/10] net: pse-pd: assorted lifetime and error-path fixes Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 01/10] net: pse-pd: size the notification kfifo after defaulting nr_lines Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 02/10] net: pse-pd: fix module refcount leak in pse_control_get_internal() Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 03/10] net: pse-pd: do not keep a failed IRQ in pcdev->irq Carlo Szelinsky
2026-10-18  8:23 ` Carlo Szelinsky [this message]
2026-10-18  8:23 ` [PATCH net 05/10] net: pse-pd: check the PI state under the lock when setting a power limit Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 06/10] net: pse-pd: do not tie a shared power domain to its creator's devres Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 07/10] net: pse-pd: pd692x0: release the manager power budget through devres Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 08/10] net: pse-pd: pd692x0: defer probe while a manager supply is unresolved Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 09/10] net: pse-pd: si3474: fix use-after-free in ancillary client error path Carlo Szelinsky
2026-10-18  8:23 ` [PATCH net 10/10] net: pse-pd: reject a power limit whose current does not fit an int Carlo Szelinsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261018082314.48950-5-github@szelinsky.de \
    --to=github@szelinsky.de \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=horms@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=kyle.swenson@est.tech \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev-bot+sashiko@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=piotr.kubik@adtran.com \
    --cc=saikrishnag@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox