From: Pablo Neira Ayuso <pablo@netfilter.org>
To: netfilter-devel@vger.kernel.org
Cc: davem@davemloft.net, netdev@vger.kernel.org, kuba@kernel.org,
pabeni@redhat.com, edumazet@kernel.org, horms@kernel.org,
fw@strlen.de, ja@ssi.bg
Subject: [PATCH net 06/10] netfilter: nf_reject: initialize IPCB at inet ingress
Date: Mon, 19 Oct 2026 17:02:45 +0200 [thread overview]
Message-ID: <20261019150249.1879516-7-pablo@netfilter.org> (raw)
In-Reply-To: <20261019150249.1879516-1-pablo@netfilter.org>
From: Kyle Zeng <kylebot@openai.com>
The inet ingress hook runs before ip_rcv_core() and ip6_rcv_core(), so
neither IPCB nor IP6CB has been initialized when nft_reject_inet passes
a packet to nf_send_unreach() or nf_send_unreach6(). skb->cb can
therefore retain metadata from an earlier protocol layer.
For IPv4, icmp_send() treats IPCB(skb)->opt as parsed IPv4 options.
Stale option offsets can make __ip_options_echo() copy an
attacker-controlled length into its 40-byte reply option buffer and
overflow the stack. On an unpatched v7.2-rc5 kernel, the IPv4
reproducer produced:
BUG: KASAN: stack-out-of-bounds in __ip_options_echo()
Write of size 255
For IPv6, icmpv6_send() consumes IP6CB(skb) as parsed IPv6 metadata. It
always uses iif for source selection and, when MIP6 is enabled, uses
dsthao as an extension-header offset. These fields must not be stale.
For NF_INET_INGRESS, clear the address-family-specific control block and
restore its input interface before constructing the ICMP error. This
matches similar initialization normally performed by ip_rcv_core() and
ip6_rcv_core().
Fixes: 117ca1f8920c ("netfilter: nft_reject_inet: allow to use reject from inet ingress")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6-sol Codex:gpt-5.5-cyber
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
net/ipv4/netfilter/nf_reject_ipv4.c | 5 +++++
net/ipv6/netfilter/nf_reject_ipv6.c | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/net/ipv4/netfilter/nf_reject_ipv4.c b/net/ipv4/netfilter/nf_reject_ipv4.c
index 59ec465a9df9..7cb33af671e2 100644
--- a/net/ipv4/netfilter/nf_reject_ipv4.c
+++ b/net/ipv4/netfilter/nf_reject_ipv4.c
@@ -357,6 +357,11 @@ void nf_send_unreach(struct sk_buff *skb_in, int code, int hook)
if (!skb_valid_dst(skb_in) && nf_reject_fill_skb_dst(skb_in) < 0)
return;
+ if (hook == NF_INET_INGRESS) {
+ memset(IPCB(skb_in), 0, sizeof(*IPCB(skb_in)));
+ IPCB(skb_in)->iif = skb_in->skb_iif;
+ }
+
if (skb_csum_unnecessary(skb_in) ||
!nf_reject_verify_csum(skb_in, dataoff, proto)) {
icmp_send(skb_in, ICMP_DEST_UNREACH, code, 0);
diff --git a/net/ipv6/netfilter/nf_reject_ipv6.c b/net/ipv6/netfilter/nf_reject_ipv6.c
index 07cdaa10da0d..5e08d8529cc8 100644
--- a/net/ipv6/netfilter/nf_reject_ipv6.c
+++ b/net/ipv6/netfilter/nf_reject_ipv6.c
@@ -444,6 +444,11 @@ void nf_send_unreach6(struct net *net, struct sk_buff *skb_in,
if (hooknum == NF_INET_LOCAL_OUT && skb_in->dev == NULL)
skb_in->dev = net->loopback_dev;
+ if (hooknum == NF_INET_INGRESS) {
+ memset(IP6CB(skb_in), 0, sizeof(*IP6CB(skb_in)));
+ IP6CB(skb_in)->iif = skb_in->skb_iif;
+ }
+
if (!skb_valid_dst(skb_in) && nf_reject6_fill_skb_dst(skb_in) < 0)
return;
--
2.47.3
next prev parent reply other threads:[~2026-10-19 15:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 15:02 [PATCH net 00/10] Netfilter/IPVS fixes for net Pablo Neira Ayuso
2026-10-19 15:02 ` [PATCH net 01/10] netfilter: nf_conntrack: avoid truncating IPv6 nexthdr offset Pablo Neira Ayuso
2026-10-19 15:55 ` netdev-bot+sinfo
2026-10-19 15:02 ` [PATCH net 02/10] netfilter: nft_payload: restrict checksum offsets to known values Pablo Neira Ayuso
2026-10-19 15:02 ` [PATCH net 03/10] ipvs: fix more races around the overload flag Pablo Neira Ayuso
2026-10-19 15:02 ` [PATCH net 04/10] ipvs: skip committing sync_threshold when proc_dointvec fails Pablo Neira Ayuso
2026-10-19 15:02 ` [PATCH net 05/10] netfilter: flowtable: use the vlan id, not the full tci, in the tuple key Pablo Neira Ayuso
2026-10-19 15:02 ` Pablo Neira Ayuso [this message]
2026-10-19 15:02 ` [PATCH net 07/10] netfilter: nft_set_rbtree: narrow down range completion to anonymous sets Pablo Neira Ayuso
2026-10-19 15:02 ` [PATCH net 08/10] netfilter: xt_dccp: handle reserved options as single-byte Pablo Neira Ayuso
2026-10-19 15:02 ` [PATCH net 09/10] netfilter: flowtable: reset transport header after nf_flow_encap_pop() Pablo Neira Ayuso
2026-10-19 15:02 ` [PATCH net 10/10] netfilter: nf_conntrack_netlink: fix inverted IPv6 tuple filter Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261019150249.1879516-7-pablo@netfilter.org \
--to=pablo@netfilter.org \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=fw@strlen.de \
--cc=horms@kernel.org \
--cc=ja@ssi.bg \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox