From: Dudu Lu <phx0fer@gmail.com>
To: jhs@mojatatu.com, jiri@resnulli.us
Cc: netdev@vger.kernel.org
Subject: [PATCH net] net/sched: gred: keep the qdisc lock while updating the table
Date: Wed, 21 Oct 2026 23:54:33 +0800 [thread overview]
Message-ID: <20261021155434.66572-1-phx0fer@gmail.com> (raw)
gred_change_table_def() publishes table->DPs/def/red_flags under
sch_tree_lock(), drops the lock, and then keeps writing state the
datapath reads without it:
- gred_enable_rio_mode()/gred_disable_rio_mode()/gred_disable_wred_mode()
set/clear table->flags;
- the red_flags_changed loop writes table->tab[i]->red_flags;
- the shadowed-VQ loop frees table->tab[i] and clears the slot.
gred_enqueue() and gred_dequeue() read those same fields (test_bit on
table->flags, q->red_flags, t->tab[]/t->DPs) under the same root lock on
another CPU, so the post-unlock writes race with the enqueue path:
BUG: KCSAN: data-race in gred_change_table_def [sch_gred] / gred_enqueue [sch_gred]
read (marked) to 0xffff000007ad3b00 of 8 bytes by task 110 on cpu 0:
gred_enqueue+0x88/0xc60 [sch_gred]
dev_qdisc_enqueue+0x4c/0x19c
__dev_queue_xmit+0x10a4/0x1ea4
The comment justifying the early unlock only covers the DP-vs-DPs check,
which the shadowed-VQ free loop relies on; it does not cover the scalar
mode bits and per-VQ red_flags written afterwards. Move the unlock below
those updates so everything the datapath reads is published under the
lock that protects it.
Fixes: 6639607ed9de ("[PKT_SCHED]: GRED: Use a central table definition change procedure")
Assisted-by: LLM
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
---
Tested base
-----------
Detected on Linux 7.3-rc4 (commit 93f51579e7df), arm64 QEMU guest.
Re-checked against mainline f47d223627f8 (v7.3-341): the affected code
is unchanged between the two, so the bug is still present there.
Checked against linux-next next-20261021 (commit 9a482184d910): the
affected code is unchanged there as well, so the bug is still present in
linux-next too.
Reproducer status
-----------------
A reproducer was written and executed on an arm64 QEMU guest with
CONFIG_NET_SCH_GRED=m; KCSAN reported the race at the claimed sink. The
reproducer source is not posted here per Documentation/process/security-bugs.rst;
it is available on request.
Triggering conditions
---------------------
CAP_NET_ADMIN to reconfigure the qdisc; the race is stochastic (long clean
stretches between reports).
Notes
-----
Built and checkpatch-clean: this patch was applied on top of 7.3-rc4
(commit 93f51579e7df) and a full arm64 kernel (defconfig) was built with
it -- no new warnings or errors. scripts/checkpatch.pl reports 0 errors,
0 warnings.
net/sched/sch_gred.c | 18 ++++++++++--------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c
index f04f425c6c44..f3d9a7252949 100644
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -442,13 +442,6 @@ static int gred_change_table_def(struct Qdisc *sch, struct nlattr *dps,
red_flags_changed = table->red_flags != sopt->flags;
table->red_flags = sopt->flags;
- /*
- * Every entry point to GRED is synchronized with the above code
- * and the DP is checked against DPs, i.e. shadowed VQs can no
- * longer be found so we can unlock right here.
- */
- sch_tree_unlock(sch);
-
if (sopt->grio) {
gred_enable_rio_mode(table);
gred_disable_wred_mode(table);
@@ -474,6 +467,15 @@ static int gred_change_table_def(struct Qdisc *sch, struct nlattr *dps,
}
}
+ /*
+ * Keep the lock until every field the datapath reads (the
+ * RIO/WRED mode bits, the per-VQ red_flags and the tab[] slots)
+ * has been updated: gred_enqueue()/gred_dequeue() read them under
+ * the same lock, so publishing them after the unlock races with
+ * the enqueue path.
+ */
+ sch_tree_unlock(sch);
+
gred_offload(sch, TC_GRED_REPLACE);
return 0;
}
next reply other threads:[~2026-10-21 15:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-21 15:54 Dudu Lu [this message]
2026-10-23 10:57 ` [PATCH net] net/sched: gred: keep the qdisc lock while updating the table Simon Horman
2026-10-26 7:52 ` Daniel Machon
2026-10-26 23:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261021155434.66572-1-phx0fer@gmail.com \
--to=phx0fer@gmail.com \
--cc=jhs@mojatatu.com \
--cc=jiri@resnulli.us \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox