From: Simon Horman <horms@kernel.org>
To: rosenp@gmail.com
Cc: netdev@vger.kernel.org, rafal@milecki.pl,
bcm-kernel-feedback-list@broadcom.com, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@kernel.org, kuba@kernel.org,
pabeni@redhat.com, nbd@openwrt.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net v3] net: bgmac: fix TX DMA unmapping and slot cleanup
Date: Tue, 27 Oct 2026 17:25:52 +0000 [thread overview]
Message-ID: <20261027172552.GP257209@horms.kernel.org> (raw)
In-Reply-To: <20261027172240.416526-2-horms@kernel.org>
On Tue, Oct 27, 2026 at 05:22:41PM +0000, Simon Horman wrote:
> This is an AI-generated review of your patch. The human sending this
> email has considered the AI review valid, or at least plausible.
> Full review at: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20261022215235.3692083-1-rosenp@gmail.com?part=1
> ---
> net: bgmac: fix TX DMA unmapping and slot cleanup
>
> This patch fixes the bgmac_dma_tx_add() error path so that the head and
> each mapped fragment are unmapped from their own slots. It also clears
> dma_addr on every slot the failed packet touched. In
> bgmac_dma_tx_ring_free() it picks the unmap function from the SOF flag
> of the descriptor, unmaps before freeing, and clears slot->skb and
> slot->dma_addr.
>
> > This was found through code inspection by an LLM while hitting other
> > bugs on an Asus RT-N16. It did not hit these ones specifically.
> >
> > Fixes: 9cde94506eac ("bgmac: implement scatter/gather support")
> > Signed-off-by: Rosen Penev <rosenp@gmail.com>
>
> [Severity: Low]
> This isn't a bug, but the commit message says an LLM found these
> problems. Should the trailers include an Assisted-by: tag?
>
> Documentation/process/submitting-patches.rst says:
>
> If you used any sort of advanced coding tool in the creation of your
> patch, you need to acknowledge that use by adding an Assisted-by tag.
>
> Documentation/process/coding-assistants.rst gives the format as
> "Assisted-by: LLM [TOOL1] [TOOL2]". Step 6 of its procedure for finding
> and fixing bugs also asks for an Assisted-by tag.
>
> > diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
> > index 3e9c57196a397..d44ee8ed32459 100644
> > --- a/drivers/net/ethernet/broadcom/bgmac.c
> > +++ b/drivers/net/ethernet/broadcom/bgmac.c
>
> [ ... ]
>
> > @@ -535,17 +540,19 @@ static void bgmac_dma_tx_ring_free(struct bgmac *bgmac,
> > unsigned int len = ctl1 & BGMAC_DESC_CTL1_LEN;
> >
> > slot = &ring->slots[i];
> > - dev_kfree_skb(slot->skb);
> >
> > - if (!slot->dma_addr)
> > - continue;
> > + if (slot->dma_addr) {
> > + if (le32_to_cpu(dma_desc[i].ctl0) & BGMAC_DESC_CTL0_SOF)
> > + dma_unmap_single(dma_dev, slot->dma_addr,
> > + len, DMA_TO_DEVICE);
> > + else
> > + dma_unmap_page(dma_dev, slot->dma_addr,
> > + len, DMA_TO_DEVICE);
> > + slot->dma_addr = 0;
> > + }
> >
> > - if (slot->skb)
> > - dma_unmap_single(dma_dev, slot->dma_addr,
> > - len, DMA_TO_DEVICE);
> > - else
> > - dma_unmap_page(dma_dev, slot->dma_addr,
> > - len, DMA_TO_DEVICE);
> > + dev_kfree_skb(slot->skb);
> > + slot->skb = NULL;
>
> [Severity: Low]
> If a pending packet wraps around the end of the ring, is the skb still
> freed before all of its slots are unmapped?
>
> The commit message says bgmac_dma_tx_ring_free() will "unmap before
> freeing". That ordering only holds within a single slot, because the
> loop walks slots in physical order from 0 to BGMAC_TX_RING_SLOTS - 1.
>
> bgmac_dma_tx_add() puts fragments in consecutive slots modulo the ring
> size, and sets slot->skb only on the last one:
>
> drivers/net/ethernet/broadcom/bgmac.c:bgmac_dma_tx_add() {
> ...
> index = (index + 1) % BGMAC_TX_RING_SLOTS;
> slot = &ring->slots[index];
> ...
> slot->skb = skb;
> ...
> }
>
> Take a scatter/gather packet whose head (SOF) is in the last slot of the
> ring and whose last fragment, which owns the skb, is in slot 0. The loop
> reaches i == 0 first and calls dev_kfree_skb(), which releases skb->head
> and the frag pages. Only later, at i == BGMAC_TX_RING_SLOTS - 1, does it
> call dma_unmap_single() on the head buffer, which is already freed.
>
> bgmac_stop() and the suspend path call bgmac_chip_reset() before
> bgmac_dma_cleanup(), and the mappings are DMA_TO_DEVICE. So this may
> have no visible effect, but it still breaks the DMA API rule that a
> buffer is unmapped before it is freed.
>
> bgmac_dma_tx_free() avoids this by walking from ring->start to
> ring->end. Could the same be done here? Another option is to unmap every
> slot in a first pass and free the skbs in a second pass.
Hi Rosen,
The issue flagged above does seem somewhat concerning.
What is your take on it?
...
prev parent reply other threads:[~2026-10-27 17:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-22 21:52 [PATCH net v3] net: bgmac: fix TX DMA unmapping and slot cleanup Rosen Penev
2026-10-27 17:22 ` Simon Horman
2026-10-27 17:25 ` Simon Horman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261027172552.GP257209@horms.kernel.org \
--to=horms@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nbd@openwrt.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rafal@milecki.pl \
--cc=rosenp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox