From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
Jakub Kicinski <kuba@kernel.org>,
davem@davemloft.net, Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>, Simon Horman <horms@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Russell King <linux@armlinux.org.uk>,
Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>,
Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
thomas.petazzoni@bootlin.com,
"Alexis Lothoré" <alexis.lothore@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH net] net: stmmac: Clear DMA errors for multi-channel interrupts
Date: Fri, 30 Oct 2026 11:22:49 +0100 [thread overview]
Message-ID: <20261030102251.208929-1-maxime.chevallier@bootlin.com> (raw)
The Multi-MSI interrupt handler doesn't clear the DMA error interrupts,
and this leads to interrupt storms when one of these interrupts starts
firing :
- The RBU (rx buff unav) which triggers under high traffic load
This triggers easily with iperf3 and small udp packets, and shows
when running the netpoll kselftest
- The RPS (rx process stop) which triggers when we stop the DMA RX.
This one shows when restarting the RX logic without doing a down/up
cycle, like when attaching an XDP program. The XSK kselftests
triggers it.
Let's make sure we clear these interrupts for multi-MSI cases. It's
already properly done for the single-chan interrupt, and for that
introduce an "ERR" DMA dir, as we don't want to touch the RI/TI bits
when handling these interrupts.
To avoid duplication, the DMA TX error handling is factored out in a
dedicated helper (in the same commit to ease backporting).
Both of the above storms have been found on dwmac-motorcomm (YT8601),
and are triggered by the xdp.py, xsk_reconfig.py, xdp_features.py,
ring_reconfig.py and netpoll_basic kernel selftests.
This seems to only affect dwmac4, there's no multi-msi mode on
dwmac1000, and on dwxgmac these interrupts are masked as of today.
Fixes: 6ccf12ae111e ("net: stmmac: use interrupt mode INTM=1 for multi-MSI")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
.../net/ethernet/stmicro/stmmac/dwmac4_dma.h | 5 ++
.../net/ethernet/stmicro/stmmac/dwmac4_lib.c | 2 +
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 46 +++++++++++++------
4 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index c74bc7c9750e..a972bee66504 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -382,6 +382,7 @@ enum dma_irq_dir {
DMA_DIR_RX = 0x1,
DMA_DIR_TX = 0x2,
DMA_DIR_RXTX = 0x3,
+ DMA_DIR_ERR = 0x4,
};
enum request_irq_err {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
index 43b036d4e95b..a7caac3c98e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
@@ -173,6 +173,11 @@ static inline u32 dma_chanx_base_addr(const struct dwmac4_addrs *addrs,
DMA_CHAN_STATUS_TI | \
DMA_CHAN_STATUS_MSK_COMMON)
+#define DMA_CHAN_STATUS_MSK_ERR (DMA_CHAN_STATUS_AIS | \
+ DMA_CHAN_STATUS_FBE | \
+ DMA_CHAN_STATUS_RPS | \
+ DMA_CHAN_STATUS_RBU)
+
int dwmac4_dma_reset(void __iomem *ioaddr);
void dwmac4_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
u32 chan, bool rx, bool tx);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
index a0249715fafa..02aa1a3dd1e2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -150,6 +150,8 @@ int dwmac4_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
intr_status &= DMA_CHAN_STATUS_MSK_RX;
else if (dir == DMA_DIR_TX)
intr_status &= DMA_CHAN_STATUS_MSK_TX;
+ else if (dir == DMA_DIR_ERR)
+ intr_status &= DMA_CHAN_STATUS_MSK_ERR;
/* ABNORMAL interrupts */
if (unlikely(intr_status & DMA_CHAN_STATUS_AIS)) {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9ded31150fbe..2068b57df8d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3141,6 +3141,16 @@ static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan, u32 dir)
return status;
}
+static void stmmac_dma_tx_error(struct stmmac_priv *priv, u32 chan, int status)
+{
+ if (unlikely(status & tx_hard_error_bump_tc)) {
+ /* Try to bump up the dma threshold on this failure */
+ stmmac_bump_dma_threshold(priv, chan);
+ } else if (unlikely(status == tx_hard_error)) {
+ stmmac_tx_err(priv, chan);
+ }
+}
+
/**
* stmmac_dma_interrupt - DMA ISR
* @priv: driver private structure
@@ -3165,13 +3175,24 @@ static void stmmac_dma_interrupt(struct stmmac_priv *priv)
status[chan] = stmmac_napi_check(priv, chan,
DMA_DIR_RXTX);
- for (chan = 0; chan < tx_channel_count; chan++) {
- if (unlikely(status[chan] & tx_hard_error_bump_tc)) {
- /* Try to bump up the dma threshold on this failure */
- stmmac_bump_dma_threshold(priv, chan);
- } else if (unlikely(status[chan] == tx_hard_error)) {
- stmmac_tx_err(priv, chan);
- }
+ for (chan = 0; chan < tx_channel_count; chan++)
+ stmmac_dma_tx_error(priv, chan, status[chan]);
+}
+
+static void stmmac_dma_err_interrupt(struct stmmac_priv *priv)
+{
+ u8 tx_channel_count = priv->plat->tx_queues_to_use;
+ u8 channels_to_check = max(priv->plat->rx_queues_to_use,
+ tx_channel_count);
+ int status;
+ u8 chan;
+
+ for (chan = 0; chan < channels_to_check; chan++) {
+ status = stmmac_dma_interrupt_status(priv, priv->ioaddr,
+ &priv->xstats, chan,
+ DMA_DIR_ERR);
+ if (chan < tx_channel_count)
+ stmmac_dma_tx_error(priv, chan, status);
}
}
@@ -6466,6 +6487,9 @@ static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id)
/* To handle Common interrupts */
stmmac_common_interrupt(priv);
+ if (priv->plat->core_type == DWMAC_CORE_GMAC4)
+ stmmac_dma_err_interrupt(priv);
+
return IRQ_HANDLED;
}
@@ -6500,13 +6524,7 @@ static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
return IRQ_HANDLED;
status = stmmac_napi_check(priv, chan, DMA_DIR_TX);
-
- if (unlikely(status & tx_hard_error_bump_tc)) {
- /* Try to bump up the dma threshold on this failure */
- stmmac_bump_dma_threshold(priv, chan);
- } else if (unlikely(status == tx_hard_error)) {
- stmmac_tx_err(priv, chan);
- }
+ stmmac_dma_tx_error(priv, chan, status);
return IRQ_HANDLED;
}
--
2.56.0
reply other threads:[~2026-10-30 10:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261030102251.208929-1-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=alexis.lothore@bootlin.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lorenzo.bianconi@oss.qualcomm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=ovidiu.panait.rb@renesas.com \
--cc=pabeni@redhat.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox