From: David Yang <mmyangfl@gmail.com>
To: netdev@vger.kernel.org
Cc: David Yang <mmyangfl@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 3/3] net: dsa: motorcomm: Add BR_FLOOD and BR_MCAST_FLOOD support
Date: Tue, 3 Nov 2026 22:01:07 +0800 [thread overview]
Message-ID: <20261103140109.874443-4-mmyangfl@gmail.com> (raw)
In-Reply-To: <20261103140109.874443-1-mmyangfl@gmail.com>
Let the hardware flood the unknown unicast / multicast if all other
ports in the bridge have BR_FLOOD / BR_MCAST_FLOOD enabled.
Signed-off-by: David Yang <mmyangfl@gmail.com>
---
drivers/net/dsa/motorcomm/chip.c | 177 ++++++++++++++++++++++++-------
drivers/net/dsa/motorcomm/chip.h | 4 +
2 files changed, 145 insertions(+), 36 deletions(-)
diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index fb993cc9607c..247446c6466e 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -1160,6 +1160,7 @@ yt921x_dsa_port_vlan_add(struct dsa_switch *ds, int port,
static int yt921x_userport_standalone(struct yt921x_priv *priv, int port)
{
+ struct yt921x_port *pp = &priv->ports[port];
u32 mask;
u32 ctrl;
int res;
@@ -1183,13 +1184,24 @@ static int yt921x_userport_standalone(struct yt921x_priv *priv, int port)
if (res)
return res;
- /* Unrelated since learning is off and all packets are trapped;
- * set it anyway
+ /* Unrelated since learning is off and there is only one possible
+ * destination; set it anyway
*/
res = yt921x_port_set_pvid(priv, port, YT921X_VID_UNWARE);
if (res)
return res;
+ mask = BIT(port);
+ res = yt921x_reg_clear_bits(priv, YT921X_FILTER_UNK_UCAST, mask);
+ if (res)
+ return res;
+ res = yt921x_reg_clear_bits(priv, YT921X_FILTER_UNK_MCAST, mask);
+ if (res)
+ return res;
+
+ pp->flood = true;
+ pp->mcast_flood = true;
+
return 0;
}
@@ -1225,6 +1237,20 @@ static int yt921x_isolate(struct yt921x_priv *priv, int port)
return 0;
}
+static u16 yt921x_port_dest(struct yt921x_priv *priv, int port)
+{
+ struct dsa_switch *ds = &priv->ds;
+ struct net_device *bdev;
+ struct dsa_port *dp;
+
+ dp = dsa_to_port(ds, port);
+ bdev = dsa_port_bridge_dev_get(dp);
+ if (!bdev)
+ return 0;
+
+ return dsa_bridge_ports(ds, bdev) | priv->cpu_ports_mask;
+}
+
/* Make sure to include the CPU port in ports_mask, or your bridge will
* not have it.
*/
@@ -1268,7 +1294,72 @@ static int yt921x_bridge(struct yt921x_priv *priv, u16 ports_mask)
return 0;
}
-static int yt921x_bridge_leave(struct yt921x_priv *priv, int port)
+static int
+yt921x_bridge_flood_set_type(struct yt921x_priv *priv, u16 ports_mask, int type)
+{
+ unsigned long targets_mask;
+ u16 flood_ports_xor;
+ u32 filter_ctrl;
+ u16 flood_mask;
+ u32 addr;
+ int port;
+ int res;
+
+ ports_mask &= ~priv->cpu_ports_mask;
+
+ flood_mask = 0;
+ targets_mask = ports_mask;
+ for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) {
+ struct yt921x_port *pp = &priv->ports[port];
+
+ if (!type ? pp->flood : pp->mcast_flood)
+ flood_mask |= BIT(port);
+ }
+
+ flood_ports_xor = flood_mask ^ ports_mask;
+ filter_ctrl = 0;
+ targets_mask = ports_mask;
+ for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) {
+ struct yt921x_port *pp = &priv->ports[port];
+
+ /* Hardware never floods back to its own ingress port, keep
+ * hairpin port trapped: the software bridge does deliver a
+ * flood there.
+ */
+ if (!pp->hairpin && !(flood_ports_xor & ~BIT(port)))
+ continue;
+
+ filter_ctrl |= BIT(port);
+ }
+
+ addr = !type ? YT921X_FILTER_UNK_UCAST : YT921X_FILTER_UNK_MCAST;
+ res = yt921x_reg_update_bits(priv, addr, ports_mask, filter_ctrl);
+ if (res)
+ return res;
+
+ /* ACT_UNK is fixed to TRAP for every port, see yt921x_chip_setup_dsa().
+ */
+
+ return 0;
+}
+
+static int yt921x_bridge_flood_set(struct yt921x_priv *priv, u16 ports_mask)
+{
+ int res;
+ int ret;
+
+ ret = 0;
+ for (int type = 0; type < 2; type++) {
+ res = yt921x_bridge_flood_set_type(priv, ports_mask, type);
+ if (res)
+ ret = res;
+ }
+
+ return ret;
+}
+
+static int
+yt921x_bridge_leave(struct yt921x_priv *priv, int port, u16 other_ports_mask)
{
int res;
@@ -1280,6 +1371,10 @@ static int yt921x_bridge_leave(struct yt921x_priv *priv, int port)
if (res)
return res;
+ res = yt921x_bridge_flood_set(priv, other_ports_mask);
+ if (res)
+ return res;
+
return 0;
}
@@ -1296,6 +1391,10 @@ yt921x_bridge_join(struct yt921x_priv *priv, int port, u16 ports_mask)
if (res)
return res;
+ res = yt921x_bridge_flood_set(priv, ports_mask);
+ if (res)
+ return res;
+
return 0;
}
@@ -1304,7 +1403,9 @@ yt921x_bridge_flags(struct yt921x_priv *priv, int port,
struct switchdev_brport_flags flags)
{
struct yt921x_port *pp = &priv->ports[port];
- bool do_flush;
+ bool change_isolated = false;
+ bool change_flood = false;
+ u32 ports_mask;
u32 mask;
int res;
@@ -1318,36 +1419,44 @@ yt921x_bridge_flags(struct yt921x_priv *priv, int port,
return res;
}
- /* BR_FLOOD, BR_MCAST_FLOOD: see the comment where ACT_UNK_ACTn_TRAP
- * is set
- */
-
/* BR_BCAST_FLOOD: we can filter bcast, but cannot trap them */
- do_flush = false;
if (flags.mask & BR_HAIRPIN_MODE) {
pp->hairpin = flags.val & BR_HAIRPIN_MODE;
- do_flush = true;
+ change_isolated = true;
+ /* Hairpin also affects flood flags */
+ change_flood = true;
}
if (flags.mask & BR_ISOLATED) {
pp->isolated = flags.val & BR_ISOLATED;
- do_flush = true;
+ change_isolated = true;
}
- if (do_flush) {
- struct dsa_switch *ds = &priv->ds;
- struct dsa_port *dp = dsa_to_port(ds, port);
- struct net_device *bdev;
- bdev = dsa_port_bridge_dev_get(dp);
- if (bdev) {
- u32 ports_mask;
+ if (flags.mask & BR_FLOOD) {
+ pp->flood = flags.val & BR_FLOOD;
+ change_flood = true;
+ }
+ if (flags.mask & BR_MCAST_FLOOD) {
+ pp->mcast_flood = flags.val & BR_MCAST_FLOOD;
+ change_flood = true;
+ }
- ports_mask = dsa_bridge_ports(ds, bdev);
- ports_mask |= priv->cpu_ports_mask;
- res = yt921x_bridge(priv, ports_mask);
- if (res)
- return res;
- }
+ if (!change_isolated && !change_flood)
+ return 0;
+
+ ports_mask = yt921x_port_dest(priv, port);
+ if (!ports_mask)
+ return 0;
+
+ if (change_isolated) {
+ res = yt921x_bridge(priv, ports_mask);
+ if (res)
+ return res;
+ }
+ if (change_flood) {
+ res = yt921x_bridge_flood_set(priv, ports_mask);
+ if (res)
+ return res;
}
return 0;
@@ -1388,13 +1497,17 @@ yt921x_dsa_port_bridge_leave(struct dsa_switch *ds, int port,
{
struct yt921x_priv *priv = dsa_to_yt921x_priv(ds);
struct device *dev = yt921x_priv_to_device(priv);
+ u16 ports_mask;
int res;
if (dsa_is_cpu_port(ds, port))
return;
+ ports_mask = dsa_bridge_ports(ds, bridge.dev);
+ ports_mask |= priv->cpu_ports_mask;
+
mutex_lock(&priv->reg_lock);
- res = yt921x_bridge_leave(priv, port);
+ res = yt921x_bridge_leave(priv, port, ports_mask);
mutex_unlock(&priv->reg_lock);
if (res)
@@ -2275,14 +2388,6 @@ static int yt921x_chip_setup_dsa(struct yt921x_priv *priv)
if (res)
return res;
- ctrl = GENMASK(10, 0) & ~priv->cpu_ports_mask;
- res = yt921x_reg_write(priv, YT921X_FILTER_UNK_UCAST, ctrl);
- if (res)
- return res;
- res = yt921x_reg_write(priv, YT921X_FILTER_UNK_MCAST, ctrl);
- if (res)
- return res;
-
/* YT921x does not support native DSA port bridging, so we use port
* isolation to emulate it. However, be especially careful that port
* isolation takes _after_ FDB lookups, i.e. if an FDB entry (from
@@ -2291,9 +2396,9 @@ static int yt921x_chip_setup_dsa(struct yt921x_priv *priv)
* the "bridged" ports, thus we need to trap and handle those packets by
* software.
*
- * If there is no more than one bridge, we might be able to drop them
- * directly given some conditions are met, but we trap them in all cases
- * for now.
+ * In some cases, we may offload the flood action to the hardware. This
+ * is done by fixing UNK_ACT to TRAP, and toggling the FILTER_UNK on the
+ * appropriate ports.
*/
ctrl = 0;
for (int i = 0; i < YT921X_PORT_NUM; i++)
diff --git a/drivers/net/dsa/motorcomm/chip.h b/drivers/net/dsa/motorcomm/chip.h
index fc315f1d8f87..842fd8f83903 100644
--- a/drivers/net/dsa/motorcomm/chip.h
+++ b/drivers/net/dsa/motorcomm/chip.h
@@ -461,6 +461,10 @@ struct yt921x_port {
bool hairpin:1;
/* BR_ISOLATED */
bool isolated:1;
+ /* BR_FLOOD */
+ bool flood:1;
+ /* BR_MCAST_FLOOD */
+ bool mcast_flood:1;
unsigned short acl_cnt;
--
2.53.0
prev parent reply other threads:[~2026-11-03 14:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 14:01 [PATCH net-next v3 0/3] net: dsa: motorcomm: Add BR_FLOOD and BR_MCAST_FLOOD support David Yang
2026-11-03 14:01 ` [PATCH net-next v3 1/3] net: dsa: motorcomm: Isolate all ports during chip setup David Yang
2026-11-03 14:01 ` [PATCH net-next v3 2/3] net: dsa: motorcomm: Rely on port isolation for CPU port David Yang
2026-11-03 14:01 ` David Yang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261103140109.874443-4-mmyangfl@gmail.com \
--to=mmyangfl@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox