Netdev List
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Eric Dumazet <edumazet@kernel.org>
Cc: netdev@vger.kernel.org, "David S. Miller" <davem@davemloft.net>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Simon Horman" <horms@kernel.org>,
	"Willem de Bruijn" <willemb@google.com>,
	"Eugenio Pérez" <eperezma@redhat.com>,
	"Hassan Sultan" <hassansultan@google.com>,
	virtualization@lists.linux.dev
Subject: Re: [PATCH net v2 1/3] net: virtio: validate outer protocol of UDP tunnel GSO packets
Date: Wed, 4 Nov 2026 10:36:24 -0500	[thread overview]
Message-ID: <20261104103616-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20261104050131.629967-2-edumazet@kernel.org>

On Wed, Nov 04, 2026 at 06:01:29AM +0100, Eric Dumazet wrote:
> virtio_net_hdr_tnl_to_skb() trusts the virtio header to describe a
> UDP tunnel over IPv4 or IPv6, but never checks that the frame actually
> carries such outer headers. Because VIRTIO_NET_HDR_F_NEEDS_CSUM is
> mandatory for tunnel GSO, __virtio_net_hdr_to_skb() skips the flow
> dissector, so virtio_net_hdr_match_proto() is never applied either.
> 
> A guest (or a tap writer) can then inject a frame with an arbitrary
> outer ethertype, for example ETH_P_NSH, with SKB_GSO_UDP_TUNNEL set.
> The GSO stack then runs nsh_gso_segment() on top of the UDP tunnel
> segmentation, which assumes a different header layout. The result is
> segments with skb->data before skb->head, and a host crash in
> skb_under_panic() as soon as a later layer pushes a header:
> 
>   skbuff: skb_under_panic: ... put:4 ... dev:gretap1
>   kernel BUG at net/core/skbuff.c:215!
>    skb_push
>    __gre_xmit
>    gre_tap_xmit
>    ...
>    tun_get_user
> 
> Validate the outer headers with the parsing helpers from Michael's
> series "net: resolve uncommon partial checksums at ingress":
> 
> - locate the L3 header from the device type: Ethernet with optional
>   VLAN tags, or the network header set by the caller. skb->protocol is
>   not trusted when it disagrees with the frame.
> - require the outer L3 protocol to match the declared tunnel type.
> - require the outer UDP header exactly at outer_th_offset, after IPv4
>   options or IPv6 extension headers, and reject fragments.
> 
> Unlike the original helpers, ipv6_find_hdr() stops at an AH header,
> as Willem suggested in the review of that series.
> 
> Fixes: a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP GSO tunneling.")
> Reported-by: Hassan Sultan <hassansultan@google.com>
> Suggested-by: Willem de Bruijn <willemb@google.com>
> Link: https://lore.kernel.org/netdev/93d0e37c99711bebdf60c120af03010455c2f2e2.1793276116.git.mst@redhat.com/
> Cc: Willem de Bruijn <willemb@google.com>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Co-developed-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Eric Dumazet <edumazet@kernel.org>

Acked-by: Michael S. Tsirkin <mst@redhat.com>

> ---
>  include/linux/virtio_net.h | 169 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 169 insertions(+)
> 
> diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
> index d6466f96cdd0..b9c8babb1fd7 100644
> --- a/include/linux/virtio_net.h
> +++ b/include/linux/virtio_net.h
> @@ -5,7 +5,10 @@
>  #include <linux/if_vlan.h>
>  #include <linux/ip.h>
>  #include <linux/ipv6.h>
> +#include <linux/netdevice.h>
>  #include <linux/udp.h>
> +#include <net/ip.h>
> +#include <net/ipv6.h>
>  #include <net/tcp.h>
>  #include <uapi/linux/tcp.h>
>  #include <uapi/linux/virtio_net.h>
> @@ -48,6 +51,146 @@ static inline int virtio_net_hdr_set_proto(struct sk_buff *skb,
>  	return 0;
>  }
>  
> +/* TODO: nothing virtio specific here, move to ip.h */
> +
> +/*
> + * Pull and minimally validate the IPv4 header at @nhoff.
> + * Returns the header and stores the transport header offset in
> + * @thoff, or NULL if truncated or malformed.  The whole header,
> + * options included, is guaranteed linear on return.
> + */
> +static inline struct iphdr *virtio_net_ip4_parse(struct sk_buff *skb,
> +						  unsigned int nhoff,
> +						  unsigned int *thoff)
> +{
> +	unsigned int ihl;
> +	struct iphdr *iph;
> +
> +	if (!pskb_may_pull(skb, nhoff + sizeof(struct iphdr)))
> +		return NULL;
> +
> +	iph = (struct iphdr *)(skb->data + nhoff);
> +	if (iph->version != 4 ||
> +	    iph->ihl < sizeof(struct iphdr) / sizeof(u32))
> +		return NULL;
> +
> +	ihl = iph->ihl * sizeof(u32);
> +	*thoff = nhoff + ihl;
> +	/* Pull the options as well: the transport header offset
> +	 * returned above must be within the linear data.  iph goes
> +	 * stale across the pull.
> +	 */
> +	if (!pskb_may_pull(skb, nhoff + ihl))
> +		return NULL;
> +
> +	return (struct iphdr *)(skb->data + nhoff);
> +}
> +
> +/* Where does the L3 header start, and what protocol is it?
> + * Handles Ethernet and VLAN headers; other devices use the
> + * network header offset the caller set up.
> + */
> +static inline bool
> +virtio_net_l3_start(struct sk_buff *skb, int *nhoff, __be16 *proto)
> +{
> +	/* skb->dev should always be set here already,
> +	 * but let's not crash when it is not.
> +	 */
> +	if (WARN_ON_ONCE(!skb->dev))
> +		return false;
> +
> +	if (skb->dev->type == ARPHRD_ETHER ||
> +	    skb->dev->type == ARPHRD_LOOPBACK) {
> +		__be16 h_proto;
> +
> +		if (!pskb_may_pull(skb, ETH_HLEN))
> +			return false;
> +		h_proto = eth_hdr(skb)->h_proto;
> +		/* skb->protocol is a sender claim, and parts of the
> +		 * stack parse the packet per it: when it disagrees with
> +		 * the frame we do not know which view the packet will
> +		 * be parsed as, so do not validate.
> +		 */
> +		if (skb->protocol && skb->protocol != h_proto)
> +			return false;
> +		*nhoff = ETH_HLEN;
> +		*proto = h_proto;
> +		if (eth_type_vlan(*proto)) {
> +			*proto = __vlan_get_protocol(skb, *proto, nhoff);
> +			if (!*proto)
> +				return false;
> +		}
> +	} else {
> +		const struct iphdr *iph;
> +
> +		*nhoff = skb_network_offset(skb);
> +		/* An unset network header shows up as an offset
> +		 * outside of the packet.
> +		 */
> +		if (*nhoff < 0 || (unsigned int)*nhoff >= skb->len)
> +			return false;
> +		/* No L2 header to cross-check with: take the protocol
> +		 * from the IP version at the network header.
> +		 */
> +		if (!pskb_may_pull(skb, *nhoff + 1))
> +			return false;
> +		iph = (const struct iphdr *)(skb->data + *nhoff);
> +		if (iph->version == 4)
> +			*proto = htons(ETH_P_IP);
> +		else if (iph->version == 6)
> +			*proto = htons(ETH_P_IPV6);
> +		else
> +			return false;
> +		if (skb->protocol && skb->protocol != *proto)
> +			return false;
> +	}
> +	return true;
> +}
> +
> +/* Walk the L3 header at @nhoff: where does its transport header
> + * start, and which protocol is it?  Returns false if the header
> + * is truncated, malformed or fragmented.
> + */
> +static inline bool
> +virtio_net_l4_start(struct sk_buff *skb, unsigned int nhoff, __be16 proto,
> +		    unsigned int *thoff, int *ip_proto)
> +{
> +	if (proto == htons(ETH_P_IP)) {
> +		const struct iphdr *iph = virtio_net_ip4_parse(skb, nhoff, thoff);
> +
> +		if (!iph || ip_is_fragment(iph))
> +			return false;
> +		*ip_proto = iph->protocol;
> +		return true;
> +	}
> +
> +	if (proto == htons(ETH_P_IPV6)) {
> +		const struct ipv6hdr *iph;
> +		int flags = IP6_FH_F_AUTH;
> +
> +		if (!pskb_may_pull(skb, nhoff + sizeof(*iph)))
> +			return false;
> +		iph = (const void *)(skb->data + nhoff);
> +		if (iph->version != 6)
> +			return false;
> +		*thoff = nhoff + sizeof(*iph);
> +		*ip_proto = iph->nexthdr;
> +		if (*ip_proto != IPPROTO_TCP && *ip_proto != IPPROTO_UDP) {
> +			*thoff = nhoff;
> +			/* Find the transport header behind any
> +			 * extension headers, AH included.
> +			 */
> +			*ip_proto = ipv6_find_hdr(skb, thoff, -1, NULL,
> +						  &flags);
> +			if (*ip_proto < 0 || flags & IP6_FH_F_FRAG)
> +				return false;
> +		}
> +		return true;
> +	}
> +
> +	return false;
> +}
> +
>  static inline int __virtio_net_hdr_to_skb(struct sk_buff *skb,
>  					  const struct virtio_net_hdr *hdr,
>  					  bool little_endian, u8 hdr_gso_type)
> @@ -282,6 +425,29 @@ static inline unsigned int virtio_l3min(bool is_ipv6)
>  	return is_ipv6 ? sizeof(struct ipv6hdr) : sizeof(struct iphdr);
>  }
>  
> +/* Do the tunnel offsets match the outer headers in the frame?
> + * The L3 header the tunnel claims must be the one the frame
> + * carries, with UDP following it at @outer_th.
> + */
> +static inline bool
> +virtio_net_tnl_offsets_ok(struct sk_buff *skb, bool outer_isv6,
> +			  unsigned int outer_th)
> +{
> +	int nhoff;
> +	__be16 proto;
> +	unsigned int thoff;
> +	int ip_proto;
> +
> +	if (!virtio_net_l3_start(skb, &nhoff, &proto))
> +		return false;
> +	if (outer_isv6 != (proto == htons(ETH_P_IPV6)))
> +		return false;
> +	if (!virtio_net_l4_start(skb, nhoff, proto, &thoff, &ip_proto))
> +		return false;
> +
> +	return ip_proto == IPPROTO_UDP && outer_th == thoff;
> +}
> +
>  static inline int
>  virtio_net_hdr_tnl_to_skb(struct sk_buff *skb,
>  			  const struct virtio_net_hdr_v1_hash_tunnel *vhdr,
> @@ -338,6 +504,9 @@ virtio_net_hdr_tnl_to_skb(struct sk_buff *skb,
>  	if (ret)
>  		return ret;
>  
> +	if (!virtio_net_tnl_offsets_ok(skb, outer_isv6, outer_th))
> +		return -EINVAL;
> +
>  	/* In case of USO, the inner protocol is still unknown and
>  	 * `inner_isv6` is just a guess, additional parsing is needed.
>  	 * The previous validation ensures that accessing an ipv4 inner
> -- 
> 2.53.0


  parent reply	other threads:[~2026-11-04 15:36 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04  5:01 [PATCH net v2 0/3] net: virtio: validate outer protocol of UDP tunnel GSO packets Eric Dumazet
2026-11-04  5:01 ` [PATCH net v2 1/3] " Eric Dumazet
2026-11-04 15:32   ` Willem de Bruijn
2026-11-04 15:36   ` Michael S. Tsirkin [this message]
2026-11-04  5:01 ` [PATCH net v2 2/3] selftests: net: tuntap: fix UDP checksum length in build_udp_packet_csum() Eric Dumazet
2026-11-04  5:01 ` [PATCH net v2 3/3] selftests: net: tun: test outer protocol of UDP tunnel GSO packets Eric Dumazet
2026-11-04 15:36   ` Willem de Bruijn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261104103616-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=eperezma@redhat.com \
    --cc=hassansultan@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=virtualization@lists.linux.dev \
    --cc=willemb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox