[PATCH net 3/4] tg3: Skip querying for management FW when no NCSI present

[Pavan Chebbi <pavan.chebbi@broadcom.com>]

On BCM5719/BCM5720, when the NCSI component is missing in the NVRAM,
driver should not assume that "DASH" management FW is running by
default. In this case if user runs ethtool -i command, invalid string
"DASH" and garbage DASH FW version is being displayed. However, the
5719/20 chipset cannot have any "DASH" management firmware running.

Hence skip querying the APE FW version registers and adding the "DASH"
string to the tp->fw_ver if NCSI is not present. Just report the
bootcode version.

This was seen by a user.  With this change, ethtool -i displays only the
bootcode version.

Fixes: ecc796486f0a ("tg3: Detect APE firmware types")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
---
 drivers/net/ethernet/broadcom/tg3.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index e9b48e58fdd4..16f8368874e7 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -16029,19 +16029,21 @@ static void tg3_probe_ncsi(struct tg3 *tp)
 
 static void tg3_read_dash_ver(struct tg3 *tp)
 {
-	int vlen;
-	u32 apedata;
 	char *fwtype;
-
-	apedata = tg3_ape_read32(tp, TG3_APE_FW_VERSION);
+	u32 apedata;
+	int vlen;
 
 	if (tg3_flag(tp, APE_HAS_NCSI))
 		fwtype = "NCSI";
 	else if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5725)
 		fwtype = "SMASH";
+	else if (tg3_asic_rev(tp) == ASIC_REV_5719 ||
+		 tg3_asic_rev(tp) == ASIC_REV_5720)
+		return;
 	else
 		fwtype = "DASH";
 
+	apedata = tg3_ape_read32(tp, TG3_APE_FW_VERSION);
 	vlen = strlen(tp->fw_ver);
 
 	snprintf(&tp->fw_ver[vlen], TG3_VER_SIZE - vlen, " %s v%d.%d.%d.%d",
-- 
2.52.0