From: Antonio Quartulli <antonio@mandelbit.com>
To: intel-wired-lan@lists.osuosl.org
Cc: Antonio Quartulli <antonio@mandelbit.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
Przemek Kitszel <przemyslaw.kitszel@intel.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: [PATCH net v2 1/3] igb: fix RTNL assertion when resuming from runtime suspend
Date: Mon, 16 Nov 2026 16:30:37 +0100 [thread overview]
Message-ID: <20261116153041.3002666-2-antonio@mandelbit.com> (raw)
In-Reply-To: <20261116153041.3002666-1-antonio@mandelbit.com>
Since commit ac8c58f5b535 ("igb: fix deadlock caused by taking RTNL in
RPM resume path") __igb_resume() doesn't take RTNL for runtime resume,
but __igb_open() still calls netif_set_real_num_{tx,rx}_queues(), which
require it. An asynchronous runtime resume (e.g. after the link comes
back) then triggers "RTNL: assertion failed".
Skip them when resuming. The counts are set again on every regular open,
which happens under RTNL; the only case left out is a fallback from
MSI-X to MSI during a resume, which leaves the stack with more queues
than the device uses until the next open.
Tested with the 82576 emulated by QEMU.
Fixes: ac8c58f5b535 ("igb: fix deadlock caused by taking RTNL in RPM resume path")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.ipfire.org/show_bug.cgi?id=13562
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
---
v2:
- keep setting the queue counts in __igb_open() after igb_request_irq(),
only skipping them on runtime resume: setting them in igb_open()
before the device was resumed broke the MSI-X to MSI fallback and XDP
setup on a runtime suspended device (Sashiko)
- drop the reference to igc, which has the same ordering problem
Note: igc sets the queue counts in igc_open() before igc_request_irq(),
which can fall back to MSI, since 6f31d6b643a3 ("igc: Refactor runtime
power management flow"). We didn't have igc hardware to test a fix with,
so no igc patch is sent for now.
drivers/net/ethernet/intel/igb/igb_main.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 78f0786..4447546 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4178,16 +4178,20 @@ static int __igb_open(struct net_device *netdev, bool resuming)
if (err)
goto err_req_irq;
- /* Notify the stack of the actual queue counts. */
- err = netif_set_real_num_tx_queues(adapter->netdev,
- adapter->num_tx_queues);
- if (err)
- goto err_set_queues;
+ /* Notify the stack of the actual queue counts. This needs RTNL,
+ * which isn't held when resuming from runtime suspend.
+ */
+ if (!resuming) {
+ err = netif_set_real_num_tx_queues(adapter->netdev,
+ adapter->num_tx_queues);
+ if (err)
+ goto err_set_queues;
- err = netif_set_real_num_rx_queues(adapter->netdev,
- adapter->num_rx_queues);
- if (err)
- goto err_set_queues;
+ err = netif_set_real_num_rx_queues(adapter->netdev,
+ adapter->num_rx_queues);
+ if (err)
+ goto err_set_queues;
+ }
/* From here on the code is the same as igb_up() */
clear_bit(__IGB_DOWN, &adapter->state);
--
2.56.0
next prev parent reply other threads:[~2026-11-16 15:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 15:30 [PATCH net v2 0/3] igb: fix runtime PM resume issues Antonio Quartulli
2026-11-16 15:30 ` Antonio Quartulli [this message]
2026-11-16 15:30 ` [PATCH net v2 2/3] igb: link queues to NAPIs under RTNL after runtime resume Antonio Quartulli
2026-11-16 15:30 ` [PATCH net v2 3/3] igb: only allow runtime PM if the device can wake up Antonio Quartulli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116153041.3002666-2-antonio@mandelbit.com \
--to=antonio@mandelbit.com \
--cc=andrew+netdev@lunn.ch \
--cc=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox