From: Faruque Ansari <faruque.ansari@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Richard Cochran <richardcochran@gmail.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Vishnu Saini <vishnu.saini@oss.qualcomm.com>,
Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>,
Dipa Mantre <dipa.mantre@oss.qualcomm.com>,
Sravani Tella <tella@hu-tella-hyd.qualcomm.com>,
Monish Chunara <monish.chunara@oss.qualcomm.com>,
Ajinkya Inchure <ainchure@qti.qualcomm.com>,
Faruque Ansari <faruque.ansari@oss.qualcomm.com>,
Kishor Buchi <kbuchi@qti.qualcomm.com>
Subject: [PATCH 2/3] arm64: dts: qcom: add Monaco Draco AC SoM
Date: Tue, 17 Nov 2026 08:12:10 +0530 [thread overview]
Message-ID: <20261117-monaco-draco-v1-2-e42d1673148d@oss.qualcomm.com> (raw)
In-Reply-To: <20261117-monaco-draco-v1-0-e42d1673148d@oss.qualcomm.com>
Introduce the device tree for the QCS8300-based Monaco Draco AC
SoM. The Monaco Draco AC SoM is a compact compute module integrating
the QCS8300 SoC, two PMM8654AU PMICs, eMMC, UFS storage, an Adreno
623 GPU, USB and UART interfaces, designed to mount on carrier
boards.
The initial SoM device tree includes basic support for:
- RPMH regulators for two PMM8654AU PMICs
- QUP firmware paths (qupv3_id_0/1)
- Remoteproc instances (ADSP, CDSP, GPDSP) with firmware paths
- Console UART (uart7, serial0) and secondary UART (uart6, serial2)
- eMMC storage
- UFS storage
- USB1 in peripheral mode with HS PHY and QMP SuperSpeed PHY, and USB2
with HS PHY
- GPU (Adreno 623) with ZAP shader firmware
Co-developed-by: Kishor Buchi <kbuchi@qti.qualcomm.com>
Signed-off-by: Kishor Buchi <kbuchi@qti.qualcomm.com>
Signed-off-by: Faruque Ansari <faruque.ansari@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/monaco-draco-ac-som.dtsi | 319 ++++++++++++++++++++++
1 file changed, 319 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/monaco-draco-ac-som.dtsi b/arch/arm64/boot/dts/qcom/monaco-draco-ac-som.dtsi
new file mode 100644
index 000000000000..294ed0b6f898
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-draco-ac-som.dtsi
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "monaco.dtsi"
+#include "monaco-pmics.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart7;
+ serial2 = &uart6;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* This comes from a PMIC handled within the SAIL domain */
+ vreg_s2s: vreg-s2s {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s2s";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_l3a: ldo3 {
+ regulator-name = "vreg_l3a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a: ldo4 {
+ regulator-name = "vreg_l4a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9a: smps9 {
+ regulator-name = "vreg_s9a";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <512000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5c: smps5 {
+ regulator-name = "vreg_s5c";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
+&mdss_dp0_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l6a>;
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda-qref-supply = <&vreg_l4a>;
+ vdda-refgen-supply = <&vreg_l7a>;
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l6a>;
+ vdda-pll-supply = <&vreg_l5a>;
+ vdda-qref-supply = <&vreg_l4a>;
+ vdda-refgen-supply = <&vreg_l7a>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ firmware-name = "qcom/qcs8300/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ firmware-name = "qcom/qcs8300/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs8300/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs8300/cdsp0.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_gpdsp {
+ firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+
+ status = "okay";
+};
+
+&sdhc_1 {
+ vmmc-supply = <&vreg_l8a>;
+ vqmmc-supply = <&vreg_s2s>;
+
+ no-sd;
+ no-sdio;
+ non-removable;
+
+ status = "okay";
+};
+
+&serdes0 {
+ vdda-0p9-supply = <&vreg_l4a>;
+ vdda-1p2-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&uart6 {
+ status = "okay";
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l8a>;
+ vcc-max-microamp = <1100000>;
+ vccq-supply = <&vreg_l4c>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ dr_mode = "peripheral";
+
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l7c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
+&usb_qmpphy {
+ vdda-phy-supply = <&vreg_l7a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l7c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
--
2.34.1
next prev parent reply other threads:[~2026-11-17 2:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 2:42 [PATCH 0/3] arm64: dts: qcom: add Monaco Draco EVK board support Faruque Ansari
2026-11-17 2:42 ` [PATCH 1/3] dt-bindings: arm: qcom: add Monaco Draco EVK board Faruque Ansari
2026-11-17 2:42 ` Faruque Ansari [this message]
2026-11-17 2:42 ` [PATCH 3/3] arm64: dts: " Faruque Ansari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117-monaco-draco-v1-2-e42d1673148d@oss.qualcomm.com \
--to=faruque.ansari@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=ainchure@qti.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dipa.mantre@oss.qualcomm.com \
--cc=kbuchi@qti.qualcomm.com \
--cc=khalid.ansari@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=monish.chunara@oss.qualcomm.com \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=tella@hu-tella-hyd.qualcomm.com \
--cc=vishnu.saini@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox