Netdev List
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Jijie Shao <shaojijie@huawei.com>,
	Simon Horman <horms@kernel.org>,
	Runyu Xiao <runyu.xiao@seu.edu.cn>,
	David Yang <mmyangfl@gmail.com>,
	Herbert Valerio Riedel <hvr@gnu.org>,
	Danny Kukawka <danny.kukawka@bisect.de>,
	Mugunthan V N <mugunthanvnm@ti.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	linux-kernel@vger.kernel.org (open list),
	Manuel Lauss <manuel.lauss@gmail.com>
Subject: [PATCH net v3 08/10] net: phy: smsc: wait for LAN83C183 power-down recovery
Date: Tue, 17 Nov 2026 11:32:21 -0800	[thread overview]
Message-ID: <20261117193223.2795612-9-f.fainelli@gmail.com> (raw)
In-Reply-To: <20261117193223.2795612-1-f.fainelli@gmail.com>

The LAN83C183 uses the generic PHY driver, which returns immediately
after clearing BMCR_PDOWN. Section 1.11 of the datasheet allows 500 ms
before normal operation is restored. Starting the Au1000 MAC before the
MII clocks recover can hang the MTX-1 when reopening its interface.

Add a LAN83C183 driver entry and resume callback. Wait for recovery only
when BMCR_PDOWN was actually cleared, and propagate MDIO errors without
waiting. Resuming an already awake PHY does not incur the delay.

This supplies the PHY recovery delay; it does not by itself fix the
Au1000 MAC/PHY ordering on reopen. The companion patch, "net: au1000:
keep the MAC stopped until the PHY link is ready", resumes the PHY
synchronously before MAC initialization and stops the MAC before PHY
suspend. Both changes are needed to address the MTX-1 reopen hang.
Keep this PHY change first so the recovery delay is available when the
MAC sequencing fix is applied.

Fixes: be9dad1f9f26 ("net: phy: suspend phydev when going to HALTED")
Link: https://pdf.dzsc.com/LAN/LAN83C183.pdf#page=44
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/Kconfig |  2 +-
 drivers/net/phy/smsc.c  | 26 ++++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 30e9d22c8d1a..10466b2574eb 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -421,7 +421,7 @@ config SMSC_PHY
 	tristate "SMSC PHYs"
 	select CRC16
 	help
-	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+	  Currently supports the LAN83C183, LAN83C185, LAN8187 and LAN8700 PHYs
 
 config STE10XP
 	tristate "STMicroelectronics STe10Xp PHYs"
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 48487149c225..c3b51afd4b1e 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mii.h>
@@ -684,8 +685,32 @@ int smsc_phy_probe(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(smsc_phy_probe);
 
+static int lan83c183_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_modify_changed(phydev, MII_BMCR, BMCR_PDOWN, 0);
+	if (ret < 0)
+		return ret;
+
+	/* The PHY needs up to 500 ms to restore operation after power-down. */
+	if (ret)
+		msleep(500);
+
+	return 0;
+}
+
 static struct phy_driver smsc_phy_driver[] = {
 {
+	.phy_id		= 0x0016f840,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "SMSC LAN83C183",
+
+	.get_features	= genphy_read_abilities,
+	.suspend	= genphy_suspend,
+	.resume		= lan83c183_resume,
+	.set_loopback	= genphy_loopback,
+}, {
 	.phy_id		= 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN83C185",
@@ -887,6 +912,7 @@ MODULE_AUTHOR("Herbert Valerio Riedel");
 MODULE_LICENSE("GPL");
 
 static const struct mdio_device_id __maybe_unused smsc_tbl[] = {
+	{ 0x0016f840, 0xfffffff0 },
 	{ 0x0007c0a0, 0xfffffff0 },
 	{ 0x0007c0b0, 0xfffffff0 },
 	{ 0x0007c0c0, 0xfffffff0 },
-- 
2.53.0


  parent reply	other threads:[~2026-11-17 19:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 19:32 [PATCH net v3 00/10] net: au1000: Bug fixes Florian Fainelli
2026-11-17 19:32 ` [PATCH net v3 01/10] net: au1000: recycle RX descriptors on allocation failure Florian Fainelli
2026-11-17 19:32 ` [PATCH net v3 02/10] net: au1000: clear all-multicast mode when restoring hash filtering Florian Fainelli
2026-11-17 19:32 ` [PATCH net v3 03/10] net: au1000: disconnect the PHY before freeing the MDIO bus Florian Fainelli
2026-11-17 19:32 ` [PATCH net v3 04/10] net: au1000: report MDIO transaction timeouts Florian Fainelli
2026-11-17 19:32 ` [PATCH net v3 05/10] net: au1000: serialize TX completion with packet submission Florian Fainelli
2026-11-17 19:32 ` [PATCH net v3 06/10] net: au1000: restore receive filtering before enabling RX Florian Fainelli
2026-11-17 19:32 ` [PATCH net v3 07/10] net: au1000: restore RX buffer addresses when restarting the MAC Florian Fainelli
2026-11-17 19:32 ` Florian Fainelli [this message]
2026-11-17 19:32 ` [PATCH net v3 09/10] net: au1000: keep the MAC stopped until the PHY link is ready Florian Fainelli
2026-11-17 19:32 ` [PATCH net v3 10/10] net: au1000: reject frames larger than the TX bounce buffer Florian Fainelli
2026-11-17 19:38 ` [PATCH net v3 00/10] net: au1000: Bug fixes netdev-bot+sinfo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117193223.2795612-9-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=danny.kukawka@bisect.de \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=hvr@gnu.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=manuel.lauss@gmail.com \
    --cc=mmyangfl@gmail.com \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=runyu.xiao@seu.edu.cn \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=shaojijie@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox