From: Ahmad Byagowi <ahmadexp@gmail.com>
To: netdev@vger.kernel.org, vadim.fedorenko@linux.dev,
richardcochran@gmail.com
Cc: andrew+netdev@lunn.ch, arkadiusz.kubalewski@intel.com,
davem@davemloft.net, edumazet@kernel.org, jiri@resnulli.us,
kuba@kernel.org, linux-kernel@vger.kernel.org, pabeni@redhat.com
Subject: [PATCH net 4/4] ptp: ocp: correct the DCF output frequency
Date: Wed, 18 Nov 2026 12:05:24 -0800 [thread overview]
Message-ID: <20261118-timecard-common-301f823ddd-4-ahmadexp@gmail.com> (raw)
In-Reply-To: <20261118-timecard-common-301f823ddd-0-ahmadexp@gmail.com>
The output selector table uses 77000 Hz for DCF, whereas the input table
and the DPLL supported frequency list use 77500 Hz. A request for the
advertised DCF77 frequency consequently fails on an output, and reading
that output reports a frequency outside its advertised set.
Use 77500 Hz for the DCF output selector as well.
Reported by the netdev Sashiko AI review and confirmed by code
inspection. Source-derived C regression tests pass with ASan/UBSan;
restoring the faulty selector, mask, disabled-state or DCF value makes
the corresponding regression fail. Tests use stubbed MMIO, not hardware.
The driver object builds on current net with W=1 and KCFLAGS=-Werror. No
physical card was tested.
Codex prepared the fix, tests and changelog from the review and upstream
source, at the request to separate common-driver fixes from WiWi support
and validate removal ordering.
Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops")
Link: https://lore.kernel.org/r/179502617840.3136.12704245716223038161@kernel.org
Signed-off-by: Ahmad Byagowi <ahmadexp@gmail.com>
---
drivers/ptp/ptp_ocp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 650047581f..aa950cae68 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -1376,7 +1376,7 @@ static const struct ocp_selector ptp_ocp_sma_out[] = {
{ .name = "GNSS1", .value = 0x0004, .frequency = 1 },
{ .name = "GNSS2", .value = 0x0008, .frequency = 1 },
{ .name = "IRIG", .value = 0x0010, .frequency = 10000 },
- { .name = "DCF", .value = 0x0020, .frequency = 77000 },
+ { .name = "DCF", .value = 0x0020, .frequency = 77500 },
{ .name = "GEN1", .value = 0x0040 },
{ .name = "GEN2", .value = 0x0080 },
{ .name = "GEN3", .value = 0x0100 },
--
2.54.0 (Apple Git-157)
prev parent reply other threads:[~2026-11-18 20:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 20:05 [PATCH net 0/4] ptp: ocp: fix timestamp teardown and DPLL routing Ahmad Byagowi
2026-11-18 20:05 ` [PATCH net 1/4] ptp: ocp: prevent timestamp rearming during detach Ahmad Byagowi
2026-11-18 20:05 ` [PATCH net 2/4] ptp: ocp: use hardware selectors in DPLL frequency operations Ahmad Byagowi
2026-11-18 20:05 ` [PATCH net 3/4] ptp: ocp: report disabled SMA inputs consistently over DPLL Ahmad Byagowi
2026-11-18 20:05 ` Ahmad Byagowi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118-timecard-common-301f823ddd-4-ahmadexp@gmail.com \
--to=ahmadexp@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=arkadiusz.kubalewski@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox