From: Bastian Germann <bage@debian.org>
To: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Vladimir Oltean <olteanv@gmail.com>,
Bastian Germann <bage@debian.org>
Subject: [PATCH net-next] net: mdio: handle broken-turn-around for non-PHY MDIO devices
Date: Fri, 20 Nov 2026 00:13:19 +0100 [thread overview]
Message-ID: <20261119231319.1256419-1-bage@debian.org> (raw)
The "broken-turn-around" property is documented in mdio.yaml for any
MDIO device, but the MDIO core currently parses it only for PHY devices
in fwnode_mdiobus_phy_device_register(). Non-PHY devices, such as DSA
switches, are registered through of_mdiobus_register_device(), where the
property is ignored, so MDIO bus drivers that rely on phy_ignore_ta_mask
still treat the turn-around/read failure as an error.
Parse the property when registering a non-PHY MDIO device and set the
corresponding bit in phy_ignore_ta_mask before registering the device.
Signed-off-by: Bastian Germann <bage@debian.org>
---
drivers/net/mdio/of_mdio.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index b8d298c04d3f..0695ae83b83b 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -56,6 +56,9 @@ static int of_mdiobus_register_device(struct mii_bus *mdio,
struct mdio_device *mdiodev;
int rc;
+ if (fwnode_property_read_bool(fwnode, "broken-turn-around"))
+ mdio->phy_ignore_ta_mask |= BIT(addr);
+
mdiodev = mdio_device_create(mdio, addr);
if (IS_ERR(mdiodev))
return PTR_ERR(mdiodev);
reply other threads:[~2026-11-19 23:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119231319.1256419-1-bage@debian.org \
--to=bage@debian.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox