From: Ahmad Byagowi <ahmadexp@gmail.com>
To: netdev@vger.kernel.org
Cc: andrew+netdev@lunn.ch, arkadiusz.kubalewski@intel.com,
davem@davemloft.net, edumazet@kernel.org, jiri@resnulli.us,
kuba@kernel.org, pabeni@redhat.com, richardcochran@gmail.com,
rmk+kernel@armlinux.org.uk, vadim.fedorenko@linux.dev,
vladimir.oltean@nxp.com
Subject: [PATCH net v3 3/4] ptp: ocp: report disabled SMA inputs consistently over DPLL
Date: Fri, 20 Nov 2026 13:21:37 -0800 [thread overview]
Message-ID: <20261120-timecard-common-v3-33316bf475-3-ahmadexp@gmail.com> (raw)
In-Reply-To: <20261120-timecard-common-v3-33316bf475-0-ahmadexp@gmail.com>
Disabling an SMA input clears its mux field. Zero is also the selector
for 10 MHz, so a DPLL read reports 10 MHz while sysfs reports None. The
DPLL core then treats a request to enable 10 MHz as unchanged and skips
the setter, leaving the input disabled.
Substitute SMA_DISABLE for disabled inputs before looking up the
frequency, as the sysfs path already does. The None entry reports zero
Hz and a subsequent 10 MHz request reaches the setter.
Reported by the netdev Sashiko AI review and confirmed by code
inspection. Source-derived C regression tests pass with ASan/UBSan;
restoring the faulty selector, mask, disabled-state or DCF value makes
the corresponding regression fail. Tests use stubbed MMIO, not hardware.
The driver object builds on current net with W=1 and KCFLAGS=-Werror. No
physical card was tested.
Codex prepared the fix, tests and changelog from the review and upstream
source, at the request to separate common-driver fixes from WiWi support
and validate removal ordering.
Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops")
Link: https://lore.kernel.org/r/179502617840.3136.12704245716223038161@kernel.org
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ahmad Byagowi <ahmadexp@gmail.com>
---
drivers/ptp/ptp_ocp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 95a4df468e79..653c3b1ca066 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -5889,6 +5889,8 @@ static int ptp_ocp_dpll_frequency_get(const struct dpll_pin *pin,
val = bp->sma_op->get(bp, sma_nr + 1);
val &= SMA_SELECT_MASK;
+ if (sma->mode == SMA_MODE_IN && sma->disabled)
+ val = SMA_DISABLE;
tbl = bp->sma_op->tbl[sma->mode];
for (i = 0; tbl[i].name; i++)
if (val == tbl[i].value) {
next prev parent reply other threads:[~2026-11-20 21:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 21:21 [PATCH net v3 0/4] ptp: fix timestamp teardown and OCP DPLL routing Ahmad Byagowi
2026-11-20 21:21 ` [PATCH net v3 1/4] ptp: disable all timestamp channels after removing the user interfaces Ahmad Byagowi
2026-11-22 20:10 ` Vadim Fedorenko
2026-11-20 21:21 ` [PATCH net v3 2/4] ptp: ocp: use hardware selectors in DPLL frequency operations Ahmad Byagowi
2026-11-20 21:21 ` Ahmad Byagowi [this message]
2026-11-20 21:21 ` [PATCH net v3 4/4] ptp: ocp: correct the DCF output frequency Ahmad Byagowi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120-timecard-common-v3-33316bf475-3-ahmadexp@gmail.com \
--to=ahmadexp@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=arkadiusz.kubalewski@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=vadim.fedorenko@linux.dev \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox