Netdev List
 help / color / mirror / Atom feed
From: David Ahern <dsahern@kernel.org>
To: netdev@vger.kernel.org
Cc: ralf@mandelbit.com, David Ahern <dahern@nvidia.com>,
	David Ahern <dsahern@kernel.org>,
	Ido Schimmel <idosch@nvidia.com>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>
Subject: [RFC net-next 0/6] ipv6: validate dsts against the netns route generation
Date: Sun, 22 Nov 2026 15:26:58 -0700	[thread overview]
Message-ID: <20261122222717.126333-2-dsahern@kernel.org> (raw)
In-Reply-To: <20261122222717.126333-1-dsahern@kernel.org>

From: David Ahern <dahern@nvidia.com>

An IPv6 dst has never carried the fib6 serial number it was created
under. rt6_get_cookie() reads fn->fn_sernum through rt->from when a
socket, dst_cache or xfrm bundle stores its cookie, so a FIB change
that lands between the route lookup and the cookie capture is folded
into the cookie and a stale dst looks valid. The only dsts stamped at
creation are pcpu dsts of nexthop-object routes, which store the netns
genid in rt->sernum.

Looking at this I found that rt_genid_ipv6() and the fib6 serial
number are already the same counter: net->ipv6.fib6_sernum, which
fib6_new_sernum() advances on every FIB change. fn_sernum is a per-node
copy of it. So this series moves dst validation onto that counter, the
way IPv4 uses rt_genid, instead of adding another one:

 1. Stamp every dst with the counter in ip6_dst_alloc() and validate by
    comparison in ip6_dst_check(). Long-lived dsts (pcpu dsts of routes
    with an embedded fib6_nh, and exception dsts) are re-stamped when a
    lookup finds them again, otherwise they would stay invalid.

 2. ip6_link_failure() forced a new lookup by writing -1 to fn_sernum.
    That no longer invalidates anything, so clear the failing dst's
    sernum instead.

 3-4. Nexthop objects: factor out nh_has_f6i(), then bump the counter
    when a nexthop used through a group is replaced, and when a member
    is removed from a group.

 5. A new PMTU or redirect exception used to bump the counter, which
    with (1) would invalidate every dst in the namespace. Do what IPv4
    does in update_or_create_fnhe() and invalidate only the pcpu dsts
    of the affected fib6_nh. Route dumps still need to see that an
    exception was added to the root node, so add a per-table sequence
    for that rather than inventing fn_sernum values the counter could
    later issue again.

 6. Since nothing validates against fn_sernum any more,
    rt_genid_bump_ipv6() no longer needs to walk every node of every
    table. Make it an atomic increment like rt_genid_bump_ipv4(), and
    drop the __fib6_flush_trees pointer. fn_sernum remains only for
    route dump consistency, so nexthop, address and rule changes no
    longer restart in-progress dumps.

David Ahern (6):
  ipv6: validate dsts against the netns route generation
  ipv6: invalidate the failing dst in ip6_link_failure()
  nexthop: factor out nh_has_f6i()
  nexthop: bump the IPv6 route generation on group changes
  ipv6: scope exception invalidation to the affected nexthop
  ipv6: make rt_genid_bump_ipv6() a plain counter increment

 include/net/ip6_fib.h       |  45 +++-------------
 include/net/net_namespace.h |  26 ++++++---
 net/ipv4/nexthop.c          |  42 ++++++++++++---
 net/ipv6/addrconf_core.c    |   7 ---
 net/ipv6/ip6_fib.c          |  76 +++++++++++---------------
 net/ipv6/route.c            | 104 ++++++++++++++++++++++++------------
 6 files changed, 162 insertions(+), 138 deletions(-)

-- 
2.43.0


  reply	other threads:[~2026-11-22 22:27 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-22 22:26 David Ahern
2026-11-22 22:26 ` David Ahern [this message]
2026-11-22 22:30   ` [RFC net-next 0/6] ipv6: validate dsts against the netns route generation David Ahern
2026-11-22 22:26 ` [RFC net-next 1/6] " David Ahern
2026-11-22 22:27 ` [RFC net-next 2/6] ipv6: invalidate the failing dst in ip6_link_failure() David Ahern
2026-11-22 22:27 ` [RFC net-next 3/6] nexthop: factor out nh_has_f6i() David Ahern
2026-11-22 22:27 ` [RFC net-next 4/6] nexthop: bump the IPv6 route generation on group changes David Ahern
2026-11-22 22:27 ` [RFC net-next 5/6] ipv6: scope exception invalidation to the affected nexthop David Ahern
2026-11-22 22:27 ` [RFC net-next 6/6] ipv6: make rt_genid_bump_ipv6() a plain counter increment David Ahern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261122222717.126333-2-dsahern@kernel.org \
    --to=dsahern@kernel.org \
    --cc=dahern@nvidia.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=horms@kernel.org \
    --cc=idosch@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=ralf@mandelbit.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox