From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
To: "David E. Box" <david.e.box@linux.intel.com>,
netdev@vger.kernel.org, ilpo.jarvinen@linux.intel.com
Cc: linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH 3/8] platform/x86/intel/sdsi: Add header file
Date: Thu, 8 Feb 2024 13:52:56 -0800 [thread overview]
Message-ID: <273bac88-db72-4282-861d-e9886d32ca7f@linux.intel.com> (raw)
In-Reply-To: <20240201010747.471141-4-david.e.box@linux.intel.com>
On 1/31/24 5:07 PM, David E. Box wrote:
> In preparation for new source files, move common structures to a new
> header flie.
Add some detail about why you adding new source files.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>
> Signed-off-by: David E. Box <david.e.box@linux.intel.com>
> ---
> MAINTAINERS | 1 +
> drivers/platform/x86/intel/sdsi.c | 23 +----------------------
> drivers/platform/x86/intel/sdsi.h | 31 +++++++++++++++++++++++++++++++
> 3 files changed, 33 insertions(+), 22 deletions(-)
> create mode 100644 drivers/platform/x86/intel/sdsi.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8d1052fa6a69..09ef8497e48a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11042,6 +11042,7 @@ INTEL SDSI DRIVER
> M: David E. Box <david.e.box@linux.intel.com>
> S: Supported
> F: drivers/platform/x86/intel/sdsi.c
> +F: drivers/platform/x86/intel/sdsi.h
> F: tools/arch/x86/intel_sdsi/
> F: tools/testing/selftests/drivers/sdsi/
>
> diff --git a/drivers/platform/x86/intel/sdsi.c b/drivers/platform/x86/intel/sdsi.c
> index 05a35f2f85b6..d48bb648f0b2 100644
> --- a/drivers/platform/x86/intel/sdsi.c
> +++ b/drivers/platform/x86/intel/sdsi.c
> @@ -22,24 +22,16 @@
> #include <linux/types.h>
> #include <linux/uaccess.h>
>
> +#include "sdsi.h"
> #include "vsec.h"
>
> #define ACCESS_TYPE_BARID 2
> #define ACCESS_TYPE_LOCAL 3
>
> #define SDSI_MIN_SIZE_DWORDS 276
> -#define SDSI_SIZE_MAILBOX 1024
> #define SDSI_SIZE_REGS 80
> #define SDSI_SIZE_CMD sizeof(u64)
>
> -/*
> - * Write messages are currently up to the size of the mailbox
> - * while read messages are up to 4 times the size of the
> - * mailbox, sent in packets
> - */
> -#define SDSI_SIZE_WRITE_MSG SDSI_SIZE_MAILBOX
> -#define SDSI_SIZE_READ_MSG (SDSI_SIZE_MAILBOX * 4)
> -
> #define SDSI_ENABLED_FEATURES_OFFSET 16
> #define SDSI_FEATURE_SDSI BIT(3)
> #define SDSI_FEATURE_METERING BIT(26)
> @@ -103,19 +95,6 @@ struct disc_table {
> u32 offset;
> };
>
> -struct sdsi_priv {
> - struct mutex mb_lock; /* Mailbox access lock */
> - struct device *dev;
> - void __iomem *control_addr;
> - void __iomem *mbox_addr;
> - void __iomem *regs_addr;
> - int control_size;
> - int maibox_size;
> - int registers_size;
> - u32 guid;
> - u32 features;
> -};
> -
> /* SDSi mailbox operations must be performed using 64bit mov instructions */
> static __always_inline void
> sdsi_memcpy64_toio(u64 __iomem *to, const u64 *from, size_t count_bytes)
> diff --git a/drivers/platform/x86/intel/sdsi.h b/drivers/platform/x86/intel/sdsi.h
> new file mode 100644
> index 000000000000..d0d7450c7b2b
> --- /dev/null
> +++ b/drivers/platform/x86/intel/sdsi.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __PDx86_SDSI_H_
> +#define __PDx86_SDSI_H_
> +#include <linux/mutex.h>
> +#include <linux/types.h>
> +
> +#define SDSI_SIZE_MAILBOX 1024
> +
> +/*
> + * Write messages are currently up to the size of the mailbox
> + * while read messages are up to 4 times the size of the
> + * mailbox, sent in packets
> + */
> +#define SDSI_SIZE_WRITE_MSG SDSI_SIZE_MAILBOX
> +#define SDSI_SIZE_READ_MSG (SDSI_SIZE_MAILBOX * 4)
> +
> +struct device;
> +
> +struct sdsi_priv {
> + struct mutex mb_lock; /* Mailbox access lock */
> + struct device *dev;
> + void __iomem *control_addr;
> + void __iomem *mbox_addr;
> + void __iomem *regs_addr;
> + int control_size;
> + int maibox_size;
> + int registers_size;
> + u32 guid;
> + u32 features;
> +};
> +#endif
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
next prev parent reply other threads:[~2024-02-08 21:52 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-01 1:07 [PATCH 0/8] Intel On Demand: Add netlink interface for SPDM attestation David E. Box
2024-02-01 1:07 ` [PATCH 1/8] platform/x86/intel/sdsi: Set message size during writes David E. Box
2024-02-01 16:49 ` Kuppuswamy Sathyanarayanan
2024-02-08 13:42 ` Ilpo Järvinen
2024-02-08 21:49 ` Kuppuswamy Sathyanarayanan
2024-02-01 1:07 ` [PATCH 2/8] platform/x86/intel/sdsi: Combine read and write mailbox flows David E. Box
2024-02-01 17:31 ` Kuppuswamy Sathyanarayanan
2024-02-01 18:11 ` David E. Box
2024-02-08 13:38 ` Ilpo Järvinen
2024-02-01 1:07 ` [PATCH 3/8] platform/x86/intel/sdsi: Add header file David E. Box
2024-02-08 13:41 ` Ilpo Järvinen
2024-02-08 21:52 ` Kuppuswamy Sathyanarayanan [this message]
2024-02-01 1:07 ` [PATCH 4/8] platform/x86/intel/sdsi: Add netlink SPDM transport David E. Box
2024-02-01 9:26 ` Jiri Pirko
2024-02-01 16:42 ` David E. Box
2024-02-01 18:00 ` Jiri Pirko
2024-02-01 1:07 ` [PATCH 5/8] platform/x86/intel/sdsi: Add in-band BIOS lock support David E. Box
2024-02-08 13:52 ` Ilpo Järvinen
2024-02-01 1:07 ` [PATCH 6/8] platform/x86/intel/sdsi: Add attribute to read the current meter state David E. Box
2024-02-08 14:43 ` Ilpo Järvinen
2024-02-01 1:07 ` [PATCH 7/8] tools: Fix errors in meter_certificate display David E. Box
2024-02-08 14:46 ` Ilpo Järvinen
2024-02-01 1:07 ` [PATCH 8/8] tools: intel_sdsi: Add current meter support David E. Box
2024-02-08 14:52 ` Ilpo Järvinen
2024-02-01 3:49 ` [PATCH 0/8] Intel On Demand: Add netlink interface for SPDM attestation Stephen Hemminger
2024-02-01 16:53 ` Kuppuswamy Sathyanarayanan
2024-02-02 1:42 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=273bac88-db72-4282-861d-e9886d32ca7f@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=david.e.box@linux.intel.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).