netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jay Vosburgh <fubar@us.ibm.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: akpm@linux-foundation.org (Andrew Morton),
	olel@ans.pl, bugme-daemon@bugzilla.kernel.org,
	shemminger@linux-foundation.org, davem@davemloft.net,
	netdev@vger.kernel.org, andy@greyhouse.net
Subject: Re: [Bugme-new] [Bug 9543] New: RTNL: assertion failed at net/ipv6/addrconf.c (2164)/RTNL: assertion failed at net/ipv4/devinet.c (1055)
Date: Wed, 12 Dec 2007 09:46:55 -0800	[thread overview]
Message-ID: <28503.1197481615@death> (raw)
In-Reply-To: <E1J2Rgs-0006mz-00@gondolin.me.apana.org.au>

Herbert Xu <herbert@gondor.apana.org.au> wrote:

>> diff -puN drivers/net/bonding/bond_sysfs.c~bonding-locking-fix drivers/net/bonding/bond_sysfs.c
>> --- a/drivers/net/bonding/bond_sysfs.c~bonding-locking-fix
>> +++ a/drivers/net/bonding/bond_sysfs.c
>> @@ -1111,8 +1111,6 @@ static ssize_t bonding_store_primary(str
>> out:
>>        write_unlock_bh(&bond->lock);
>> 
>> -       rtnl_unlock();
>> -
>
>Looking at the changeset that added this perhaps the intention
>is to hold the lock? If so we should add an rtnl_lock to the start
>of the function.

	Yes, this function needs to hold locks, and more than just
what's there now.  I believe the following should be correct; I haven't
tested it, though (I'm supposedly on vacation right now).

	The following change should be correct for the
bonding_store_primary case discussed in this thread, and also corrects
the bonding_store_active case which performs similar functions.

	The bond_change_active_slave and bond_select_active_slave
functions both require rtnl, bond->lock for read and curr_slave_lock for
write_bh, and no other locks.  This is so that the lower level
mode-specific functions can release locks down to just rtnl in order to
call, e.g., dev_set_mac_address with the locks it expects (rtnl only).

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>

diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 11b76b3..28a2d80 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1075,7 +1075,10 @@ static ssize_t bonding_store_primary(struct device *d,
 	struct slave *slave;
 	struct bonding *bond = to_bond(d);
 
-	write_lock_bh(&bond->lock);
+	rtnl_lock();
+	read_lock(&bond->lock);
+	write_lock_bh(&bond->curr_slave_lock);
+
 	if (!USES_PRIMARY(bond->params.mode)) {
 		printk(KERN_INFO DRV_NAME
 		       ": %s: Unable to set primary slave; %s is in mode %d\n",
@@ -1109,8 +1112,8 @@ static ssize_t bonding_store_primary(struct device *d,
 		}
 	}
 out:
-	write_unlock_bh(&bond->lock);
-
+	write_unlock_bh(&bond->curr_slave_lock);
+	read_unlock(&bond->lock);
 	rtnl_unlock();
 
 	return count;
@@ -1190,7 +1193,8 @@ static ssize_t bonding_store_active_slave(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	rtnl_lock();
-	write_lock_bh(&bond->lock);
+	read_lock(&bond->lock);
+	write_lock_bh(&bond->curr_slave_lock);
 
 	if (!USES_PRIMARY(bond->params.mode)) {
 		printk(KERN_INFO DRV_NAME
@@ -1247,7 +1251,8 @@ static ssize_t bonding_store_active_slave(struct device *d,
 		}
 	}
 out:
-	write_unlock_bh(&bond->lock);
+	write_unlock_bh(&bond->curr_slave_lock);
+	read_unlock(&bond->lock);
 	rtnl_unlock();
 
 	return count;


  reply	other threads:[~2007-12-12 17:47 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <bug-9543-10286@http.bugzilla.kernel.org/>
2007-12-11 11:46 ` [Bugme-new] [Bug 9543] New: RTNL: assertion failed at net/ipv6/addrconf.c (2164)/RTNL: assertion failed at net/ipv4/devinet.c (1055) Andrew Morton
2007-12-11 15:04   ` Krzysztof Oledzki
2007-12-11 20:30     ` Andrew Morton
2007-12-12 13:31   ` Herbert Xu
2007-12-12 17:46     ` Jay Vosburgh [this message]
2007-12-12 19:07       ` Andy Gospodarek
2007-12-14 16:14       ` Krzysztof Oledzki
2007-12-14 18:26         ` Andy Gospodarek
2007-12-14 18:57           ` Krzysztof Oledzki
2007-12-14 22:03             ` Andy Gospodarek
2007-12-14 22:11               ` Krzysztof Oledzki
2007-12-14 22:27                 ` Andy Gospodarek
2007-12-18 19:52               ` Krzysztof Oledzki
2007-12-14 22:47             ` Andy Gospodarek
2007-12-15  4:10               ` Herbert Xu
2007-12-15 15:09                 ` Andy Gospodarek
2007-12-16  2:27                   ` Herbert Xu
2007-12-16  3:17                     ` Andy Gospodarek
2007-12-16  3:23                       ` Herbert Xu
2007-12-18 19:53               ` Krzysztof Oledzki
2007-12-19 14:42                 ` Andy Gospodarek
2008-01-07 17:57                   ` Krzysztof Oledzki
2008-01-07 20:26                     ` Andy Gospodarek
2008-01-07 20:40                       ` Jay Vosburgh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=28503.1197481615@death \
    --to=fubar@us.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=andy@greyhouse.net \
    --cc=bugme-daemon@bugzilla.kernel.org \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=netdev@vger.kernel.org \
    --cc=olel@ans.pl \
    --cc=shemminger@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).