[PATCH net-next] net: phy: realtek: add support for RTL8211C

[Heiner Kallweit <hkallweit1@gmail.com>]

RTL8211C has an issue when operating in Gigabit slave mode, therefore
genphy driver can't be used. See also this U-boot change.
https://lists.denx.de/pipermail/u-boot/2016-March/249712.html

Add a PHY driver for this chip with the quirk to force Gigabit master
mode. As a note: This will make it impossible to connect two network
ports directly which both are driven by a RTl8211C.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/realtek.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 082fb40c..eb6cb2cc 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -128,6 +128,15 @@ static int rtl8211f_config_intr(struct phy_device *phydev)
 	return phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
 }
 
+static int rtl8211c_config_init(struct phy_device *phydev)
+{
+	/* RTL8211C has an issue when operating in Gigabit slave mode */
+	phy_set_bits(phydev, MII_CTRL1000,
+		     CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
+
+	return genphy_config_init(phydev);
+}
+
 static int rtl8211f_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -190,6 +199,14 @@ static struct phy_driver realtek_drvs[] = {
 		.write_mmd	= &genphy_write_mmd_unsupported,
 		.suspend	= rtl8211b_suspend,
 		.resume		= rtl8211b_resume,
+	}, {
+		.phy_id		= 0x001cc913,
+		.name		= "RTL8211C Gigabit Ethernet",
+		.phy_id_mask	= 0x001fffff,
+		.features	= PHY_GBIT_FEATURES,
+		.config_init	= rtl8211c_config_init,
+		.read_mmd	= &genphy_read_mmd_unsupported,
+		.write_mmd	= &genphy_write_mmd_unsupported,
 	}, {
 		.phy_id		= 0x001cc914,
 		.name		= "RTL8211DN Gigabit Ethernet",
-- 
2.18.0