netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jay Vosburgh <fubar@us.ibm.com>
To: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	eric.dumazet@gmail.com, shemminger@vyatta.com
Subject: Re: [PATCH 1/3] bonding: add the debugfs facility to the bonding driver
Date: Fri, 10 Dec 2010 16:21:45 -0800	[thread overview]
Message-ID: <29210.1292026905@death> (raw)
In-Reply-To: <4D017F99.2040706@jp.fujitsu.com>

Taku Izumi <izumi.taku@jp.fujitsu.com> wrote:

>
>This patch provides the debugfs facility to the bonding driver.
>The "bonding" directory is created in the debugfs root and directories of
>each bonding interface (like bond0, bond1...) are created in that.
>
> # mount -t debugfs none /sys/kernel/debug
>
> # ls /sys/kernel/debug/bonding
> bond0  bond1
>
>Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>

	Tested replacement patch 1 with original patches 2 and 3.  Works
as advertised, no pesky crashes.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>

	-J


>---
> drivers/net/bonding/Makefile       |    2
> drivers/net/bonding/bond_debugfs.c |   96 +++++++++++++++++++++++++++++++++++++
> drivers/net/bonding/bond_main.c    |   10 +++
> drivers/net/bonding/bonding.h      |    9 +++
> 4 files changed, 115 insertions(+), 2 deletions(-)
>
>Index: net-next/drivers/net/bonding/bond_main.c
>===================================================================
>--- net-next.orig/drivers/net/bonding/bond_main.c
>+++ net-next/drivers/net/bonding/bond_main.c
>@@ -3507,6 +3507,8 @@ static int bond_event_changename(struct
> 	bond_remove_proc_entry(bond);
> 	bond_create_proc_entry(bond);
>
>+	bond_debug_reregister(bond);
>+
> 	return NOTIFY_DONE;
> }
>
>@@ -4789,6 +4791,8 @@ static void bond_uninit(struct net_devic
>
> 	bond_remove_proc_entry(bond);
>
>+	bond_debug_unregister(bond);
>+
> 	__hw_addr_flush(&bond->mc_list);
>
> 	list_for_each_entry_safe(vlan, tmp, &bond->vlan_list, vlan_list) {
>@@ -5191,6 +5195,8 @@ static int bond_init(struct net_device *
>
> 	bond_prepare_sysfs_group(bond);
>
>+	bond_debug_register(bond);
>+
> 	__hw_addr_init(&bond->mc_list);
> 	return 0;
> }
>@@ -5312,6 +5318,8 @@ static int __init bonding_init(void)
> 	if (res)
> 		goto err_link;
>
>+	bond_create_debugfs();
>+
> 	for (i = 0; i < max_bonds; i++) {
> 		res = bond_create(&init_net, NULL);
> 		if (res)
>@@ -5322,7 +5330,6 @@ static int __init bonding_init(void)
> 	if (res)
> 		goto err;
>
>-
> 	register_netdevice_notifier(&bond_netdev_notifier);
> 	register_inetaddr_notifier(&bond_inetaddr_notifier);
> 	bond_register_ipv6_notifier();
>@@ -5346,6 +5353,7 @@ static void __exit bonding_exit(void)
> 	bond_unregister_ipv6_notifier();
>
> 	bond_destroy_sysfs();
>+	bond_destroy_debugfs();
>
> 	rtnl_link_unregister(&bond_link_ops);
> 	unregister_pernet_subsys(&bond_net_ops);
>Index: net-next/drivers/net/bonding/Makefile
>===================================================================
>--- net-next.orig/drivers/net/bonding/Makefile
>+++ net-next/drivers/net/bonding/Makefile
>@@ -4,7 +4,7 @@
>
> obj-$(CONFIG_BONDING) += bonding.o
>
>-bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o
>+bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o bond_debugfs.o
>
> ipv6-$(subst m,y,$(CONFIG_IPV6)) += bond_ipv6.o
> bonding-objs += $(ipv6-y)
>Index: net-next/drivers/net/bonding/bond_debugfs.c
>===================================================================
>--- /dev/null
>+++ net-next/drivers/net/bonding/bond_debugfs.c
>@@ -0,0 +1,96 @@
>+#include <linux/kernel.h>
>+#include <linux/module.h>
>+#include <linux/device.h>
>+#include <linux/netdevice.h>
>+
>+#include "bonding.h"
>+
>+#ifdef CONFIG_DEBUG_FS
>+
>+#include <linux/debugfs.h>
>+#include <linux/seq_file.h>
>+
>+static struct dentry *bonding_debug_root;
>+
>+void bond_debug_register(struct bonding *bond)
>+{
>+	if (!bonding_debug_root)
>+		return;
>+
>+	bond->debug_dir =
>+		debugfs_create_dir(bond->dev->name, bonding_debug_root);
>+
>+	if (!bond->debug_dir) {
>+		pr_warning("%s: Warning: failed to register to debugfs\n",
>+			bond->dev->name);
>+		return;
>+	}
>+}
>+
>+void bond_debug_unregister(struct bonding *bond)
>+{
>+	if (!bonding_debug_root)
>+		return;
>+
>+	debugfs_remove_recursive(bond->debug_dir);
>+}
>+
>+void bond_debug_reregister(struct bonding *bond)
>+{
>+	struct dentry *d;
>+
>+	if (!bonding_debug_root)
>+		return;
>+
>+	d = debugfs_rename(bonding_debug_root, bond->debug_dir,
>+			   bonding_debug_root, bond->dev->name);
>+	if (d) {
>+		bond->debug_dir = d;
>+	} else {
>+		pr_warning("%s: Warning: failed to reregister, "
>+				"so just unregister old one\n",
>+				bond->dev->name);
>+		bond_debug_unregister(bond);
>+	}
>+}
>+
>+void bond_create_debugfs(void)
>+{
>+	bonding_debug_root = debugfs_create_dir("bonding", NULL);
>+
>+	if (!bonding_debug_root) {
>+		pr_warning("Warning: Cannot create bonding directory"
>+				" in debugfs\n");
>+	}
>+}
>+
>+void bond_destroy_debugfs(void)
>+{
>+	debugfs_remove_recursive(bonding_debug_root);
>+	bonding_debug_root = NULL;
>+}
>+
>+
>+#else /* !CONFIG_DEBUG_FS */
>+
>+void bond_debug_register(struct bonding *bond)
>+{
>+}
>+
>+void bond_debug_unregister(struct bonding *bond)
>+{
>+}
>+
>+void bond_debug_reregister(struct bonding *bond)
>+{
>+}
>+
>+void bond_create_debugfs(void)
>+{
>+}
>+
>+void bond_destroy_debugfs(void)
>+{
>+}
>+
>+#endif /* CONFIG_DEBUG_FS */
>Index: net-next/drivers/net/bonding/bonding.h
>===================================================================
>--- net-next.orig/drivers/net/bonding/bonding.h
>+++ net-next/drivers/net/bonding/bonding.h
>@@ -259,6 +259,10 @@ struct bonding {
> #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
> 	struct   in6_addr master_ipv6;
> #endif
>+#ifdef CONFIG_DEBUG_FS
>+	/* debugging suport via debugfs */
>+	struct	 dentry *debug_dir;
>+#endif /* CONFIG_DEBUG_FS */
> };
>
> /**
>@@ -380,6 +384,11 @@ void bond_select_active_slave(struct bon
> void bond_change_active_slave(struct bonding *bond, struct slave *new_active);
> void bond_register_arp(struct bonding *);
> void bond_unregister_arp(struct bonding *);
>+void bond_create_debugfs(void);
>+void bond_destroy_debugfs(void);
>+void bond_debug_register(struct bonding *bond);
>+void bond_debug_unregister(struct bonding *bond);
>+void bond_debug_reregister(struct bonding *bond);
>
> struct bond_net {
> 	struct net *		net;	/* Associated network namespace */
>
>
>--
>To unsubscribe from this list: send the line "unsubscribe netdev" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2010-12-11  0:21 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-03  7:19 [PATCH v2 0/3] bonding: add the debugfs interface to see RLB hash table Taku Izumi
2010-12-03  7:21 ` [PATCH 1/3] bonding: add the debugfs facility to the bonding driver Taku Izumi
2010-12-10  1:17   ` Taku Izumi
2010-12-11  0:21     ` Jay Vosburgh [this message]
2010-12-11  0:23       ` David Miller
2010-12-13  5:09         ` Taku Izumi
2010-12-13  5:15           ` David Miller
2010-12-03  7:22 ` [PATCH 2/3] bonding: migrate some macros from bond_alb.c to bond_alb.h Taku Izumi
2010-12-13  5:03   ` Taku Izumi
2010-12-16 20:35     ` David Miller
2010-12-03  7:22 ` [PATCH 3/3] bonding: add the debugfs interface to see RLB hash table Taku Izumi
2010-12-13  5:04   ` Taku Izumi
2010-12-16 20:35     ` David Miller
2010-12-08 20:33 ` [PATCH v2 0/3] " Jay Vosburgh
2010-12-09 10:43   ` Taku Izumi
2010-12-10  1:24   ` Taku Izumi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=29210.1292026905@death \
    --to=fubar@us.ibm.com \
    --cc=eric.dumazet@gmail.com \
    --cc=izumi.taku@jp.fujitsu.com \
    --cc=netdev@vger.kernel.org \
    --cc=shemminger@vyatta.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).