Re: [PATCH v2 1/2] drm/drm_ras: Add clear-error-counter netlink command to drm_ras

["Tauro, Riana" <riana.tauro@intel.com>]

Hi Maarten

Could you please help with an ack for this patch so we can merge this 
through drm-xe-next?

Thanks
Riana

On 4/10/2026 10:51 AM, Tauro, Riana wrote:
> Hi Rodrigo
>
> On 4/9/2026 7:07 PM, Rodrigo Vivi wrote:
>> On Thu, Apr 09, 2026 at 12:51:44PM +0530, Tauro, Riana wrote:
>>> Hi Zack
>>>
>>> Could you please take a look at this patch if applicable to your 
>>> usecase.
>>> Please let me know if any
>>> changes are required
>>>
>>> @Rodrigo This is already reviewed by Jakub and Raag.
>>> If there are no opens, can this be merged via drm_misc
>> if we push this to drm-misc-next, it might take a few weeks to propagate
>> back to drm-xe-next. With other work from you and Raag going fast pace
>> on drm-xe-next around this area, I'm afraid it could cause some 
>> conflicts.
>>
>> It is definitely fine by me, but another option is to get ack from
>> drm-misc maintainers to get this through drm-xe-next.
>>
>
> Yeah this would be better with the other RAS patches close to merge.
>
> @Maarten Can you please help with an ack if this patch looks good to you?
> This has been reviewed by Jakub from netdev and Raag from intel-xe
> There are no other opens.
>
> Thanks
> Riana
>
>>
>> so, really okay with drm-misc-next?
>>
>>> Thanks
>>> Riana
>>>
>>> On 4/9/2026 1:03 PM, Riana Tauro wrote:
>>>> Introduce a new 'clear-error-counter' drm_ras command to reset the 
>>>> counter
>>>> value for a specific error counter of a given node.
>>>>
>>>> The command is a 'do' netlink request with 'node-id' and 'error-id'
>>>> as parameters with no response payload.
>>>>
>>>> Usage:
>>>>
>>>> $ sudo ynl --family drm_ras  --do clear-error-counter --json \
>>>> '{"node-id":1, "error-id":1}'
>>>> None
>>>>
>>>> Cc: Jakub Kicinski <kuba@kernel.org>
>>>> Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
>>>> Cc: Lijo Lazar <lijo.lazar@amd.com>
>>>> Cc: Hawking Zhang <Hawking.Zhang@amd.com>
>>>> Cc: David S. Miller <davem@davemloft.net>
>>>> Cc: Paolo Abeni <pabeni@redhat.com>
>>>> Cc: Eric Dumazet <edumazet@google.com>
>>>> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
>>>> Reviewed-by: Jakub Kicinski <kuba@kernel.org>
>>>> Reviewed-by: Raag Jadav <raag.jadav@intel.com>
>>>> ---
>>>>    Documentation/gpu/drm-ras.rst            |  8 +++++
>>>>    Documentation/netlink/specs/drm_ras.yaml | 13 ++++++-
>>>>    drivers/gpu/drm/drm_ras.c                | 43 
>>>> +++++++++++++++++++++++-
>>>>    drivers/gpu/drm/drm_ras_nl.c             | 13 +++++++
>>>>    drivers/gpu/drm/drm_ras_nl.h             |  2 ++
>>>>    include/drm/drm_ras.h                    | 11 ++++++
>>>>    include/uapi/drm/drm_ras.h               |  1 +
>>>>    7 files changed, 89 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/Documentation/gpu/drm-ras.rst 
>>>> b/Documentation/gpu/drm-ras.rst
>>>> index 70b246a78fc8..4636e68f5678 100644
>>>> --- a/Documentation/gpu/drm-ras.rst
>>>> +++ b/Documentation/gpu/drm-ras.rst
>>>> @@ -52,6 +52,8 @@ User space tools can:
>>>>      as a parameter.
>>>>    * Query specific error counter values with the 
>>>> ``get-error-counter`` command, using both
>>>>      ``node-id`` and ``error-id`` as parameters.
>>>> +* Clear specific error counters with the ``clear-error-counter`` 
>>>> command, using both
>>>> +  ``node-id`` and ``error-id`` as parameters.
>>>>    YAML-based Interface
>>>>    --------------------
>>>> @@ -101,3 +103,9 @@ Example: Query an error counter for a given node
>>>>        sudo ynl --family drm_ras --do get-error-counter --json 
>>>> '{"node-id":0, "error-id":1}'
>>>>        {'error-id': 1, 'error-name': 'error_name1', 'error-value': 0}
>>>> +Example: Clear an error counter for a given node
>>>> +
>>>> +.. code-block:: bash
>>>> +
>>>> +    sudo ynl --family drm_ras --do clear-error-counter --json 
>>>> '{"node-id":0, "error-id":1}'
>>>> +    None
>>>> diff --git a/Documentation/netlink/specs/drm_ras.yaml 
>>>> b/Documentation/netlink/specs/drm_ras.yaml
>>>> index 79af25dac3c5..e113056f8c01 100644
>>>> --- a/Documentation/netlink/specs/drm_ras.yaml
>>>> +++ b/Documentation/netlink/specs/drm_ras.yaml
>>>> @@ -99,7 +99,7 @@ operations:
>>>>          flags: [admin-perm]
>>>>          do:
>>>>            request:
>>>> -          attributes:
>>>> +          attributes: &id-attrs
>>>>                - node-id
>>>>                - error-id
>>>>            reply:
>>>> @@ -113,3 +113,14 @@ operations:
>>>>                - node-id
>>>>            reply:
>>>>              attributes: *errorinfo
>>>> +    -
>>>> +      name: clear-error-counter
>>>> +      doc: >-
>>>> +           Clear error counter for a given node.
>>>> +           The request includes the error-id and node-id of the
>>>> +           counter to be cleared.
>>>> +      attribute-set: error-counter-attrs
>>>> +      flags: [admin-perm]
>>>> +      do:
>>>> +        request:
>>>> +          attributes: *id-attrs
>>>> diff --git a/drivers/gpu/drm/drm_ras.c b/drivers/gpu/drm/drm_ras.c
>>>> index b2fa5ab86d87..d6eab29a1394 100644
>>>> --- a/drivers/gpu/drm/drm_ras.c
>>>> +++ b/drivers/gpu/drm/drm_ras.c
>>>> @@ -26,7 +26,7 @@
>>>>     * efficient lookup by ID. Nodes can be registered or unregistered
>>>>     * dynamically at runtime.
>>>>     *
>>>> - * A Generic Netlink family `drm_ras` exposes two main operations to
>>>> + * A Generic Netlink family `drm_ras` exposes the below operations to
>>>>     * userspace:
>>>>     *
>>>>     * 1. LIST_NODES: Dump all currently registered RAS nodes.
>>>> @@ -37,6 +37,10 @@
>>>>     *    Returns all counters of a node if only Node ID is provided 
>>>> or specific
>>>>     *    error counters.
>>>>     *
>>>> + * 3. CLEAR_ERROR_COUNTER: Clear error counter of a given node.
>>>> + *    Userspace must provide Node ID, Error ID.
>>>> + *    Clears specific error counter of a node if supported.
>>>> + *
>>>>     * Node registration:
>>>>     *
>>>>     * - drm_ras_node_register(): Registers a new node and assigns
>>>> @@ -66,6 +70,8 @@
>>>>     *   operation, fetching all counters from a specific node.
>>>>     * - drm_ras_nl_get_error_counter_doit(): Implements the 
>>>> GET_ERROR_COUNTER doit
>>>>     *   operation, fetching a counter value from a specific node.
>>>> + * - drm_ras_nl_clear_error_counter_doit(): Implements the 
>>>> CLEAR_ERROR_COUNTER doit
>>>> + *   operation, clearing a counter value from a specific node.
>>>>     */
>>>>    static DEFINE_XARRAY_ALLOC(drm_ras_xa);
>>>> @@ -314,6 +320,41 @@ int drm_ras_nl_get_error_counter_doit(struct 
>>>> sk_buff *skb,
>>>>        return doit_reply_value(info, node_id, error_id);
>>>>    }
>>>> +/**
>>>> + * drm_ras_nl_clear_error_counter_doit() - Clear an error counter 
>>>> of a node
>>>> + * @skb: Netlink message buffer
>>>> + * @info: Generic Netlink info containing attributes of the request
>>>> + *
>>>> + * Extracts the node ID and error ID from the netlink attributes and
>>>> + * clears the current value.
>>>> + *
>>>> + * Return: 0 on success, or negative errno on failure.
>>>> + */
>>>> +int drm_ras_nl_clear_error_counter_doit(struct sk_buff *skb,
>>>> +                    struct genl_info *info)
>>>> +{
>>>> +    struct drm_ras_node *node;
>>>> +    u32 node_id, error_id;
>>>> +
>>>> +    if (!info->attrs ||
>>>> +        GENL_REQ_ATTR_CHECK(info, 
>>>> DRM_RAS_A_ERROR_COUNTER_ATTRS_NODE_ID) ||
>>>> +        GENL_REQ_ATTR_CHECK(info, 
>>>> DRM_RAS_A_ERROR_COUNTER_ATTRS_ERROR_ID))
>>>> +        return -EINVAL;
>>>> +
>>>> +    node_id = 
>>>> nla_get_u32(info->attrs[DRM_RAS_A_ERROR_COUNTER_ATTRS_NODE_ID]);
>>>> +    error_id = 
>>>> nla_get_u32(info->attrs[DRM_RAS_A_ERROR_COUNTER_ATTRS_ERROR_ID]);
>>>> +
>>>> +    node = xa_load(&drm_ras_xa, node_id);
>>>> +    if (!node || !node->clear_error_counter)
>>>> +        return -ENOENT;
>>>> +
>>>> +    if (error_id < node->error_counter_range.first ||
>>>> +        error_id > node->error_counter_range.last)
>>>> +        return -EINVAL;
>>>> +
>>>> +    return node->clear_error_counter(node, error_id);
>>>> +}
>>>> +
>>>>    /**
>>>>     * drm_ras_node_register() - Register a new RAS node
>>>>     * @node: Node structure to register
>>>> diff --git a/drivers/gpu/drm/drm_ras_nl.c 
>>>> b/drivers/gpu/drm/drm_ras_nl.c
>>>> index 16803d0c4a44..dea1c1b2494e 100644
>>>> --- a/drivers/gpu/drm/drm_ras_nl.c
>>>> +++ b/drivers/gpu/drm/drm_ras_nl.c
>>>> @@ -22,6 +22,12 @@ static const struct nla_policy 
>>>> drm_ras_get_error_counter_dump_nl_policy[DRM_RAS_
>>>>        [DRM_RAS_A_ERROR_COUNTER_ATTRS_NODE_ID] = { .type = NLA_U32, },
>>>>    };
>>>> +/* DRM_RAS_CMD_CLEAR_ERROR_COUNTER - do */
>>>> +static const struct nla_policy 
>>>> drm_ras_clear_error_counter_nl_policy[DRM_RAS_A_ERROR_COUNTER_ATTRS_ERROR_ID 
>>>> + 1] = {
>>>> +    [DRM_RAS_A_ERROR_COUNTER_ATTRS_NODE_ID] = { .type = NLA_U32, },
>>>> +    [DRM_RAS_A_ERROR_COUNTER_ATTRS_ERROR_ID] = { .type = NLA_U32, },
>>>> +};
>>>> +
>>>>    /* Ops table for drm_ras */
>>>>    static const struct genl_split_ops drm_ras_nl_ops[] = {
>>>>        {
>>>> @@ -43,6 +49,13 @@ static const struct genl_split_ops 
>>>> drm_ras_nl_ops[] = {
>>>>            .maxattr    = DRM_RAS_A_ERROR_COUNTER_ATTRS_NODE_ID,
>>>>            .flags        = GENL_ADMIN_PERM | GENL_CMD_CAP_DUMP,
>>>>        },
>>>> +    {
>>>> +        .cmd        = DRM_RAS_CMD_CLEAR_ERROR_COUNTER,
>>>> +        .doit        = drm_ras_nl_clear_error_counter_doit,
>>>> +        .policy        = drm_ras_clear_error_counter_nl_policy,
>>>> +        .maxattr    = DRM_RAS_A_ERROR_COUNTER_ATTRS_ERROR_ID,
>>>> +        .flags        = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
>>>> +    },
>>>>    };
>>>>    struct genl_family drm_ras_nl_family __ro_after_init = {
>>>> diff --git a/drivers/gpu/drm/drm_ras_nl.h 
>>>> b/drivers/gpu/drm/drm_ras_nl.h
>>>> index 06ccd9342773..a398643572a5 100644
>>>> --- a/drivers/gpu/drm/drm_ras_nl.h
>>>> +++ b/drivers/gpu/drm/drm_ras_nl.h
>>>> @@ -18,6 +18,8 @@ int drm_ras_nl_get_error_counter_doit(struct 
>>>> sk_buff *skb,
>>>>                          struct genl_info *info);
>>>>    int drm_ras_nl_get_error_counter_dumpit(struct sk_buff *skb,
>>>>                        struct netlink_callback *cb);
>>>> +int drm_ras_nl_clear_error_counter_doit(struct sk_buff *skb,
>>>> +                    struct genl_info *info);
>>>>    extern struct genl_family drm_ras_nl_family;
>>>> diff --git a/include/drm/drm_ras.h b/include/drm/drm_ras.h
>>>> index 5d50209e51db..f2a787bc4f64 100644
>>>> --- a/include/drm/drm_ras.h
>>>> +++ b/include/drm/drm_ras.h
>>>> @@ -58,6 +58,17 @@ struct drm_ras_node {
>>>>        int (*query_error_counter)(struct drm_ras_node *node, u32 
>>>> error_id,
>>>>                       const char **name, u32 *val);
>>>> +    /**
>>>> +     * @clear_error_counter:
>>>> +     *
>>>> +     * This callback is used by drm_ras to clear a specific error 
>>>> counter.
>>>> +     * Driver should implement this callback to support clearing 
>>>> error counters
>>>> +     * of a node.
>>>> +     *
>>>> +     * Returns: 0 on success, negative error code on failure.
>>>> +     */
>>>> +    int (*clear_error_counter)(struct drm_ras_node *node, u32 
>>>> error_id);
>>>> +
>>>>        /** @priv: Driver private data */
>>>>        void *priv;
>>>>    };
>>>> diff --git a/include/uapi/drm/drm_ras.h b/include/uapi/drm/drm_ras.h
>>>> index 5f40fa5b869d..218a3ee86805 100644
>>>> --- a/include/uapi/drm/drm_ras.h
>>>> +++ b/include/uapi/drm/drm_ras.h
>>>> @@ -41,6 +41,7 @@ enum {
>>>>    enum {
>>>>        DRM_RAS_CMD_LIST_NODES = 1,
>>>>        DRM_RAS_CMD_GET_ERROR_COUNTER,
>>>> +    DRM_RAS_CMD_CLEAR_ERROR_COUNTER,
>>>>        __DRM_RAS_CMD_MAX,
>>>>        DRM_RAS_CMD_MAX = (__DRM_RAS_CMD_MAX - 1)