Re: [PATCH net-next 3/5] net: phy: Add support for the ADIN1140 PHY

[Andrew Lunn <andrew@lunn.ch>]

> +static int adin1140_phy_read_mmd(struct phy_device *phydev, int devnum,
> +				 u16 regnum)
> +{
> +	struct mii_bus *bus = phydev->mdio.bus;
> +	int addr = phydev->mdio.addr;
> +
> +	return __mdiobus_c45_read(bus, addr, devnum, regnum);
> +}
> +
> +static int adin1140_phy_write_mmd(struct phy_device *phydev, int devnum,
> +				  u16 regnum, u16 val)
> +{
> +	struct mii_bus *bus = phydev->mdio.bus;
> +	int addr = phydev->mdio.addr;
> +
> +	return __mdiobus_c45_write(bus, addr, devnum, regnum, val);
> +}

Why do these exist?

> +static int adin1140_config_init(struct phy_device *phydev)
> +{
> +	/* The link status of the PHY doesn't need to be polled, because
> +	 * the device doesn't implement AN and there is no other mechanism
> +	 * to report the link state.
> +	 */
> +	phydev->irq = PHY_MAC_INTERRUPT;

I would prefer you don't abuse this.

> +static int adin1140_read_status(struct phy_device *phydev)
> +{
> +	phydev->link = 1;
> +	phydev->duplex = DUPLEX_HALF;
> +	phydev->speed = SPEED_10;
> +	phydev->autoneg = AUTONEG_DISABLE;
> +
> +	return 0;
> +}

This should have no really cost, so just let phylib poll.

	Andrew