From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Tony Nguyen <anthony.l.nguyen@intel.com>,
davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, netdev@vger.kernel.org
Cc: Yochai Hagvi <yochai.hagvi@intel.com>,
jiri@resnulli.us, Wojciech Drewek <wojciech.drewek@intel.com>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Sunitha Mekala <sunithax.d.mekala@intel.com>
Subject: Re: [PATCH net 1/6] ice: fix connection state of DPLL and out pin
Date: Thu, 22 Feb 2024 12:31:53 +0000 [thread overview]
Message-ID: <2d4d91a0-5539-4cc0-850a-3ccd44fcc648@linux.dev> (raw)
In-Reply-To: <20240220214444.1039759-2-anthony.l.nguyen@intel.com>
On 20/02/2024 21:44, Tony Nguyen wrote:
> From: Yochai Hagvi <yochai.hagvi@intel.com>
>
> Fix the connection state between source DPLL and output pin, updating the
> attribute 'state' of 'parent_device'. Previously, the connection state
> was broken, and didn't reflect the correct state.
>
> When 'state_on_dpll_set' is called with the value
> 'DPLL_PIN_STATE_CONNECTED' (1), the output pin will switch to the given
> DPLL, and the state of the given DPLL will be set to connected.
> E.g.:
> --do pin-set --json '{"id":2, "parent-device":{"parent-id":1,
> "state": 1 }}'
> This command will connect DPLL device with id 1 to output pin with id 2.
>
> When 'state_on_dpll_set' is called with the value
> 'DPLL_PIN_STATE_DISCONNECTED' (2) and the given DPLL is currently
> connected, then the output pin will be disabled.
> E.g:
> --do pin-set --json '{"id":2, "parent-device":{"parent-id":1,
> "state": 2 }}'
> This command will disable output pin with id 2 if DPLL device with ID 1 is
> connected to it; otherwise, the command is ignored.
>
> Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
> Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com>
> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> ---
> drivers/net/ethernet/intel/ice/ice_dpll.c | 43 +++++++++++++++++------
> 1 file changed, 32 insertions(+), 11 deletions(-)
>
For the series:
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
> diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c b/drivers/net/ethernet/intel/ice/ice_dpll.c
> index b9c5eced6326..9c0d739be1e9 100644
> --- a/drivers/net/ethernet/intel/ice/ice_dpll.c
> +++ b/drivers/net/ethernet/intel/ice/ice_dpll.c
> @@ -254,6 +254,7 @@ ice_dpll_output_frequency_get(const struct dpll_pin *pin, void *pin_priv,
> * ice_dpll_pin_enable - enable a pin on dplls
> * @hw: board private hw structure
> * @pin: pointer to a pin
> + * @dpll_idx: dpll index to connect to output pin
> * @pin_type: type of pin being enabled
> * @extack: error reporting
> *
> @@ -266,7 +267,7 @@ ice_dpll_output_frequency_get(const struct dpll_pin *pin, void *pin_priv,
> */
> static int
> ice_dpll_pin_enable(struct ice_hw *hw, struct ice_dpll_pin *pin,
> - enum ice_dpll_pin_type pin_type,
> + u8 dpll_idx, enum ice_dpll_pin_type pin_type,
> struct netlink_ext_ack *extack)
> {
> u8 flags = 0;
> @@ -280,10 +281,12 @@ ice_dpll_pin_enable(struct ice_hw *hw, struct ice_dpll_pin *pin,
> ret = ice_aq_set_input_pin_cfg(hw, pin->idx, 0, flags, 0, 0);
> break;
> case ICE_DPLL_PIN_TYPE_OUTPUT:
> + flags = ICE_AQC_SET_CGU_OUT_CFG_UPDATE_SRC_SEL;
> if (pin->flags[0] & ICE_AQC_GET_CGU_OUT_CFG_ESYNC_EN)
> flags |= ICE_AQC_SET_CGU_OUT_CFG_ESYNC_EN;
> flags |= ICE_AQC_SET_CGU_OUT_CFG_OUT_EN;
> - ret = ice_aq_set_output_pin_cfg(hw, pin->idx, flags, 0, 0, 0);
> + ret = ice_aq_set_output_pin_cfg(hw, pin->idx, flags, dpll_idx,
> + 0, 0);
> break;
> default:
> return -EINVAL;
> @@ -398,14 +401,27 @@ ice_dpll_pin_state_update(struct ice_pf *pf, struct ice_dpll_pin *pin,
> break;
> case ICE_DPLL_PIN_TYPE_OUTPUT:
> ret = ice_aq_get_output_pin_cfg(&pf->hw, pin->idx,
> - &pin->flags[0], NULL,
> + &pin->flags[0], &parent,
> &pin->freq, NULL);
> if (ret)
> goto err;
> - if (ICE_AQC_SET_CGU_OUT_CFG_OUT_EN & pin->flags[0])
> - pin->state[0] = DPLL_PIN_STATE_CONNECTED;
> - else
> - pin->state[0] = DPLL_PIN_STATE_DISCONNECTED;
> +
> + parent &= ICE_AQC_GET_CGU_OUT_CFG_DPLL_SRC_SEL;
> + if (ICE_AQC_SET_CGU_OUT_CFG_OUT_EN & pin->flags[0]) {
> + pin->state[pf->dplls.eec.dpll_idx] =
> + parent == pf->dplls.eec.dpll_idx ?
> + DPLL_PIN_STATE_CONNECTED :
> + DPLL_PIN_STATE_DISCONNECTED;
> + pin->state[pf->dplls.pps.dpll_idx] =
> + parent == pf->dplls.pps.dpll_idx ?
> + DPLL_PIN_STATE_CONNECTED :
> + DPLL_PIN_STATE_DISCONNECTED;
> + } else {
> + pin->state[pf->dplls.eec.dpll_idx] =
> + DPLL_PIN_STATE_DISCONNECTED;
> + pin->state[pf->dplls.pps.dpll_idx] =
> + DPLL_PIN_STATE_DISCONNECTED;
> + }
> break;
> case ICE_DPLL_PIN_TYPE_RCLK_INPUT:
> for (parent = 0; parent < pf->dplls.rclk.num_parents;
> @@ -570,7 +586,8 @@ ice_dpll_pin_state_set(const struct dpll_pin *pin, void *pin_priv,
>
> mutex_lock(&pf->dplls.lock);
> if (enable)
> - ret = ice_dpll_pin_enable(&pf->hw, p, pin_type, extack);
> + ret = ice_dpll_pin_enable(&pf->hw, p, d->dpll_idx, pin_type,
> + extack);
> else
> ret = ice_dpll_pin_disable(&pf->hw, p, pin_type, extack);
> if (!ret)
> @@ -603,6 +620,11 @@ ice_dpll_output_state_set(const struct dpll_pin *pin, void *pin_priv,
> struct netlink_ext_ack *extack)
> {
> bool enable = state == DPLL_PIN_STATE_CONNECTED;
> + struct ice_dpll_pin *p = pin_priv;
> + struct ice_dpll *d = dpll_priv;
> +
> + if (!enable && p->state[d->dpll_idx] == DPLL_PIN_STATE_DISCONNECTED)
> + return 0;
>
> return ice_dpll_pin_state_set(pin, pin_priv, dpll, dpll_priv, enable,
> extack, ICE_DPLL_PIN_TYPE_OUTPUT);
> @@ -669,10 +691,9 @@ ice_dpll_pin_state_get(const struct dpll_pin *pin, void *pin_priv,
> ret = ice_dpll_pin_state_update(pf, p, pin_type, extack);
> if (ret)
> goto unlock;
> - if (pin_type == ICE_DPLL_PIN_TYPE_INPUT)
> + if (pin_type == ICE_DPLL_PIN_TYPE_INPUT ||
> + pin_type == ICE_DPLL_PIN_TYPE_OUTPUT)
> *state = p->state[d->dpll_idx];
> - else if (pin_type == ICE_DPLL_PIN_TYPE_OUTPUT)
> - *state = p->state[0];
> ret = 0;
> unlock:
> mutex_unlock(&pf->dplls.lock);
next prev parent reply other threads:[~2024-02-22 12:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-20 21:44 [PATCH net 0/6][pull request] Intel Wired LAN Driver Updates 2024-02-20 (ice) Tony Nguyen
2024-02-20 21:44 ` [PATCH net 1/6] ice: fix connection state of DPLL and out pin Tony Nguyen
2024-02-22 12:31 ` Vadim Fedorenko [this message]
2024-02-22 13:22 ` Jiri Pirko
2024-02-20 21:44 ` [PATCH net 2/6] ice: fix dpll input pin phase_adjust value updates Tony Nguyen
2024-02-20 21:44 ` [PATCH net 3/6] ice: fix dpll and dpll_pin data access on PF reset Tony Nguyen
2024-02-20 21:44 ` [PATCH net 4/6] ice: fix dpll periodic work data updates " Tony Nguyen
2024-02-20 21:44 ` [PATCH net 5/6] ice: fix pin phase adjust " Tony Nguyen
2024-02-20 21:44 ` [PATCH net 6/6] ice: Fix ASSERT_RTNL() warning during certain scenarios Tony Nguyen
2024-02-23 3:30 ` [PATCH net 0/6][pull request] Intel Wired LAN Driver Updates 2024-02-20 (ice) patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2d4d91a0-5539-4cc0-850a-3ccd44fcc648@linux.dev \
--to=vadim.fedorenko@linux.dev \
--cc=anthony.l.nguyen@intel.com \
--cc=arkadiusz.kubalewski@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sunithax.d.mekala@intel.com \
--cc=wojciech.drewek@intel.com \
--cc=yochai.hagvi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).