Re: [PATCH v1 2/2] net: wwan: Fix SDX72 ping failure issue

[Sergey Ryazanov <ryazanov.s.a@gmail.com>]

Hello Slark,

without the first patch it is close to impossible to understand this 
one. Next time please send such tightly connected patches to both 
mailing lists.

On 07.06.2024 13:03, Slark Xiao wrote:
> For SDX72 MBIM device, it starts data mux id from 112 instead of 0.
> This would lead to device can't ping outside successfully.
> Also MBIM side would report "bad packet session (112)".
> So we add a link id default value for these SDX72 products which
> works in MBIM mode.
> 
> Signed-off-by: Slark Xiao <slark_xiao@163.com>

Since it a but fix, it needs a 'Fixes:' tag.

> ---
>   drivers/net/wwan/mhi_wwan_mbim.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wwan/mhi_wwan_mbim.c b/drivers/net/wwan/mhi_wwan_mbim.c
> index 3f72ae943b29..4ca5c845394b 100644
> --- a/drivers/net/wwan/mhi_wwan_mbim.c
> +++ b/drivers/net/wwan/mhi_wwan_mbim.c
> @@ -618,7 +618,8 @@ static int mhi_mbim_probe(struct mhi_device *mhi_dev, const struct mhi_device_id
>   	mbim->rx_queue_sz = mhi_get_free_desc_count(mhi_dev, DMA_FROM_DEVICE);
>   
>   	/* Register wwan link ops with MHI controller representing WWAN instance */
> -	return wwan_register_ops(&cntrl->mhi_dev->dev, &mhi_mbim_wwan_ops, mbim, 0);
> +	return wwan_register_ops(&cntrl->mhi_dev->dev, &mhi_mbim_wwan_ops, mbim,
> +		mhi_dev->mhi_cntrl->link_id ? mhi_dev->mhi_cntrl->link_id : 0);

Is it possible to drop the ternary operator and pass the link_id directly?

>   }
>   
>   static void mhi_mbim_remove(struct mhi_device *mhi_dev)