From: Ben Cheatham <benjamin.cheatham@amd.com>
To: <alejandro.lucero-palau@amd.com>
Cc: <linux-cxl@vger.kernel.org>, <netdev@vger.kernel.org>,
<dan.j.williams@intel.com>, <martin.habets@xilinx.com>,
<edward.cree@amd.com>, <davem@davemloft.net>, <kuba@kernel.org>,
<pabeni@redhat.com>, <edumazet@google.com>
Subject: Re: [PATCH v5 24/27] cxl: add region flag for precluding a device memory to be used for dax
Date: Fri, 22 Nov 2024 14:46:13 -0600 [thread overview]
Message-ID: <32f4889b-c097-4e72-8a71-511aa06daa58@amd.com> (raw)
In-Reply-To: <20241118164434.7551-25-alejandro.lucero-palau@amd.com>
On 11/18/24 10:44 AM, alejandro.lucero-palau@amd.com wrote:
> From: Alejandro Lucero <alucerop@amd.com>
>
> By definition a type2 cxl device will use the host managed memory for
> specific functionality, therefore it should not be available to other
> uses. However, a dax interface could be just good enough in some cases.
>
> Add a flag to a cxl region for specifically state to not create a dax
> device. Allow a Type2 driver to set that flag at region creation time.
>
> Signed-off-by: Alejandro Lucero <alucerop@amd.com>
> ---
> drivers/cxl/core/region.c | 10 +++++++++-
> drivers/cxl/cxl.h | 3 +++
> drivers/cxl/cxlmem.h | 3 ++-
> include/cxl/cxl.h | 3 ++-
> 4 files changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 70549d42c2e3..eff3ad788077 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -3558,7 +3558,8 @@ __construct_new_region(struct cxl_root_decoder *cxlrd,
> * cxl_region driver.
> */
> struct cxl_region *cxl_create_region(struct cxl_root_decoder *cxlrd,
> - struct cxl_endpoint_decoder *cxled)
> + struct cxl_endpoint_decoder *cxled,
> + bool avoid_dax)
> {
> struct cxl_region *cxlr;
>
> @@ -3574,6 +3575,10 @@ struct cxl_region *cxl_create_region(struct cxl_root_decoder *cxlrd,
> drop_region(cxlr);
> return ERR_PTR(-ENODEV);
> }
> +
> + if (avoid_dax)
> + set_bit(CXL_REGION_F_AVOID_DAX, &cxlr->flags);
> +
> return cxlr;
> }
> EXPORT_SYMBOL_NS_GPL(cxl_create_region, CXL);
> @@ -3713,6 +3718,9 @@ static int cxl_region_probe(struct device *dev)
> case CXL_DECODER_PMEM:
> return devm_cxl_add_pmem_region(cxlr);
> case CXL_DECODER_RAM:
> + if (test_bit(CXL_REGION_F_AVOID_DAX, &cxlr->flags))
> + return 0;
I think it's possible for a type 2 device to have pmem as well, and
it looks like these are the only two options at the moment, so I would
just move this check to before the switch statement.
> +
> /*
> * The region can not be manged by CXL if any portion of
> * it is already online as 'System RAM'
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index 1e0e797b9303..ee3385db5663 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -512,6 +512,9 @@ struct cxl_region_params {
> */
> #define CXL_REGION_F_NEEDS_RESET 1
>
> +/* Allow Type2 drivers to specify if a dax region should not be created. */
> +#define CXL_REGION_F_AVOID_DAX 2
> +
I would like to see flags such that the device could choose the region type
(system ram, device-dax, or none). I think that adding the ability
for device-dax would add a patch or two, so that may be a good follow up
patch.
> /**
> * struct cxl_region - CXL region
> * @dev: This region's device
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 9d874f1cb3bf..cc2e2a295f3d 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -875,5 +875,6 @@ struct seq_file;
> struct dentry *cxl_debugfs_create_dir(const char *dir);
> void cxl_dpa_debug(struct seq_file *file, struct cxl_dev_state *cxlds);
> struct cxl_region *cxl_create_region(struct cxl_root_decoder *cxlrd,
> - struct cxl_endpoint_decoder *cxled);
> + struct cxl_endpoint_decoder *cxled,
> + bool avoid_dax);
> #endif /* __CXL_MEM_H__ */
> diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
> index d295af4f5f9e..2a8ebabfc1dd 100644
> --- a/include/cxl/cxl.h
> +++ b/include/cxl/cxl.h
> @@ -73,7 +73,8 @@ struct cxl_endpoint_decoder *cxl_request_dpa(struct cxl_memdev *cxlmd,
> resource_size_t max);
> int cxl_dpa_free(struct cxl_endpoint_decoder *cxled);
> struct cxl_region *cxl_create_region(struct cxl_root_decoder *cxlrd,
> - struct cxl_endpoint_decoder *cxled);
> + struct cxl_endpoint_decoder *cxled,
> + bool avoid_dax);
>
> int cxl_accel_region_detach(struct cxl_endpoint_decoder *cxled);
> #endif
next prev parent reply other threads:[~2024-11-22 20:46 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-18 16:44 [PATCH v5 00/27] cxl: add type2 device basic support alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 01/27] " alejandro.lucero-palau
2024-11-18 21:55 ` Dave Jiang
2024-11-20 13:40 ` Alejandro Lucero Palau
2024-11-20 23:07 ` Fan Ni
2024-11-22 4:35 ` Alison Schofield
2024-11-22 9:27 ` Alejandro Lucero Palau
2024-11-26 5:59 ` Alison Schofield
2024-11-26 16:38 ` Alejandro Lucero Palau
2024-11-22 20:43 ` Ben Cheatham
2024-11-27 9:00 ` Alejandro Lucero Palau
2024-11-27 9:07 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 02/27] sfc: add cxl support using new CXL API alejandro.lucero-palau
2024-11-22 20:43 ` Ben Cheatham
2024-11-27 9:15 ` Alejandro Lucero Palau
2024-11-26 18:08 ` Fan Ni
2024-11-27 9:17 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 03/27] cxl: add capabilities field to cxl_dev_state and cxl_port alejandro.lucero-palau
2024-11-18 22:52 ` Dave Jiang
2024-11-19 12:28 ` Alejandro Lucero Palau
2024-11-19 15:53 ` Dave Jiang
2024-11-20 13:41 ` Alejandro Lucero Palau
2024-11-22 20:44 ` Ben Cheatham
2024-11-18 16:44 ` [PATCH v5 04/27] cxl/pci: add check for validating capabilities alejandro.lucero-palau
2024-11-22 20:44 ` Ben Cheatham
2024-11-27 11:34 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 05/27] cxl: move pci generic code alejandro.lucero-palau
2024-11-18 22:57 ` Dave Jiang
2024-11-22 20:44 ` Ben Cheatham
2024-11-18 16:44 ` [PATCH v5 06/27] cxl: add function for type2 cxl regs setup alejandro.lucero-palau
2024-11-18 23:32 ` Dave Jiang
2024-11-21 22:34 ` Alison Schofield
2024-11-27 11:46 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 07/27] sfc: use cxl api for regs setup and checking alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 08/27] cxl: add functions for resource request/release by a driver alejandro.lucero-palau
2024-11-22 20:45 ` Ben Cheatham
2024-11-18 16:44 ` [PATCH v5 09/27] sfc: request cxl ram resource alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 10/27] cxl: harden resource_contains checks to handle zero size resources alejandro.lucero-palau
2024-11-19 18:00 ` Dave Jiang
2024-11-20 13:44 ` Alejandro Lucero Palau
2024-11-19 19:50 ` Zhi Wang
2024-11-20 13:45 ` Alejandro Lucero Palau
2024-11-21 7:13 ` Zhi Wang
2024-11-21 2:46 ` Alison Schofield
2024-11-21 9:22 ` Alejandro Lucero Palau
2024-11-21 21:00 ` Alison Schofield
2024-11-27 14:56 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 11/27] cxl: add function for setting media ready by a driver alejandro.lucero-palau
2024-11-19 18:12 ` Dave Jiang
2024-11-22 20:45 ` Ben Cheatham
2024-11-27 15:07 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 12/27] sfc: set cxl media ready alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 13/27] cxl: prepare memdev creation for type2 alejandro.lucero-palau
2024-11-19 18:24 ` Dave Jiang
2024-11-19 20:06 ` Zhi Wang
2024-11-19 21:27 ` Dave Jiang
2024-11-20 13:57 ` Alejandro Lucero Palau
2024-11-20 17:15 ` Dave Jiang
2024-11-21 7:43 ` Zhi Wang
2024-11-22 20:45 ` Ben Cheatham
2024-11-27 16:09 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 14/27] sfc: create type2 cxl memdev alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 15/27] cxl: define a driver interface for HPA free space enumeration alejandro.lucero-palau
2024-11-22 20:45 ` Ben Cheatham
2024-11-27 16:32 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 16/27] sfc: obtain root decoder with enough HPA free space alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 17/27] cxl: define a driver interface for DPA allocation alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 18/27] sfc: get endpoint decoder alejandro.lucero-palau
2024-11-22 20:45 ` Ben Cheatham
2024-11-27 16:47 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 19/27] cxl: make region type based on endpoint type alejandro.lucero-palau
2024-11-19 20:16 ` Zhi Wang
2024-11-21 16:16 ` Dave Jiang
2024-11-18 16:44 ` [PATCH v5 20/27] cxl/region: factor out interleave ways setup alejandro.lucero-palau
2024-11-19 20:20 ` Zhi Wang
2024-11-21 16:23 ` Dave Jiang
2024-11-18 16:44 ` [PATCH v5 21/27] cxl/region: factor out interleave granularity setup alejandro.lucero-palau
2024-11-19 20:23 ` Zhi Wang
2024-11-21 16:24 ` Dave Jiang
2024-11-18 16:44 ` [PATCH v5 22/27] cxl: allow region creation by type2 drivers alejandro.lucero-palau
2024-11-19 20:37 ` Zhi Wang
2024-11-20 13:51 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 23/27] sfc: create cxl region alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 24/27] cxl: add region flag for precluding a device memory to be used for dax alejandro.lucero-palau
2024-11-19 20:39 ` Zhi Wang
2024-11-20 13:55 ` Alejandro Lucero Palau
2024-11-22 20:46 ` Ben Cheatham [this message]
2024-11-27 16:59 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 25/27] sfc: specify avoid dax when cxl region is created alejandro.lucero-palau
2024-11-18 16:44 ` [PATCH v5 26/27] cxl: add function for obtaining params from a region alejandro.lucero-palau
2024-11-19 20:40 ` Zhi Wang
2024-11-21 2:56 ` Alison Schofield
2024-11-27 17:18 ` Alejandro Lucero Palau
2024-11-21 16:31 ` Dave Jiang
2024-11-27 17:12 ` Alejandro Lucero Palau
2024-11-18 16:44 ` [PATCH v5 27/27] sfc: support pio mapping based on cxl alejandro.lucero-palau
2024-11-21 3:33 ` [PATCH v5 00/27] cxl: add type2 device basic support Alison Schofield
2024-11-21 9:27 ` Alejandro Lucero Palau
2024-11-22 4:14 ` Alison Schofield
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32f4889b-c097-4e72-8a71-511aa06daa58@amd.com \
--to=benjamin.cheatham@amd.com \
--cc=alejandro.lucero-palau@amd.com \
--cc=dan.j.williams@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=edward.cree@amd.com \
--cc=kuba@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=martin.habets@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).