From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jonathan Hutchins" Subject: tiacx100 problem Date: Thu, 19 Apr 2007 15:30:19 -0500 (CDT) Message-ID: <34104.192.168.76.5.1177014619.squirrel@mercury> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT To: netdev@vger.kernel.org Return-path: Received: from 64-151-34-11.dyn.everestkc.net ([64.151.34.11]:1836 "EHLO mercury.tarcanfel.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1422667AbXDSUsw (ORCPT ); Thu, 19 Apr 2007 16:48:52 -0400 Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org I believe the following error message is from the tiacx driver, and is not related to the firmware: "unknown chip and EEPROM version combination (ACX100, v0), don't know how to parse config options yet. Please report" This is for an SMC2435W, part number 99-012084-036. While it appears to load, the card registers as eth1 instead of wlan0, and iwlist reports "eth1 Interface doesn't support scanning." iwconfig will not actually set the essid for the card. Running Mandriva 2007.1, kernel 2.6.17-5mdv on a Toshiba Satellite A15-S129. This card worked under Mandriva 9.1. The firmware source page listed on sourceforge's site is no longer available.