netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: David Miller <davem@davemloft.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Realtek linux nic maintainers <nic_swsd@realtek.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: [PATCH net-next v3 07/10] r8169: use phy_speed_down / phy_speed_up
Date: Tue, 17 Jul 2018 22:51:57 +0200	[thread overview]
Message-ID: <34710b67-5a3e-21f4-dfcc-5f381bb45436@gmail.com> (raw)
In-Reply-To: <a33329d7-96ba-314e-3865-b9800ab14f87@gmail.com>

Use new phylib functions phy_speed_down() and phy_speed_up().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/ethernet/realtek/r8169.c | 29 ++++------------------------
 1 file changed, 4 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 1150c3f5..402674cf 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4233,6 +4233,9 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
 		rtl_writephy(tp, 0x0b, 0x0000); //w 0x0b 15 0 0
 	}
 
+	/* We may have called phy_speed_down before */
+	phy_speed_up(dev->phydev);
+
 	genphy_soft_reset(dev->phydev);
 
 	rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
@@ -4316,30 +4319,6 @@ static void rtl_init_mdio_ops(struct rtl8169_private *tp)
 	}
 }
 
-static void rtl_speed_down(struct rtl8169_private *tp)
-{
-	u32 adv;
-	int lpa;
-
-	rtl_writephy(tp, 0x1f, 0x0000);
-	lpa = rtl_readphy(tp, MII_LPA);
-
-	if (lpa & (LPA_10HALF | LPA_10FULL))
-		adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
-	else if (lpa & (LPA_100HALF | LPA_100FULL))
-		adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
-		      ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
-	else
-		adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
-		      ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
-		      (tp->mii.supports_gmii ?
-		       ADVERTISED_1000baseT_Half |
-		       ADVERTISED_1000baseT_Full : 0);
-
-	rtl8169_set_speed(tp->dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
-			  adv);
-}
-
 static void rtl_wol_suspend_quirk(struct rtl8169_private *tp)
 {
 	switch (tp->mac_version) {
@@ -4364,7 +4343,7 @@ static bool rtl_wol_pll_power_down(struct rtl8169_private *tp)
 	if (!netif_running(tp->dev) || !__rtl8169_get_wol(tp))
 		return false;
 
-	rtl_speed_down(tp);
+	phy_speed_down(tp->dev->phydev, false);
 	rtl_wol_suspend_quirk(tp);
 
 	return true;
-- 
2.18.0

  parent reply	other threads:[~2018-07-17 21:26 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-17 20:42 [PATCH net-next v3 00/10] r8169: add phylib support Heiner Kallweit
2018-07-17 20:51 ` [PATCH net-next v3 01/10] r8169: add basic " Heiner Kallweit
2018-07-17 20:51 ` [PATCH net-next v3 02/10] r8169: use phy_resume/phy_suspend Heiner Kallweit
2018-07-17 20:51 ` [PATCH net-next v3 03/10] r8169: replace open-coded PHY soft reset with genphy_soft_reset Heiner Kallweit
2018-07-17 20:51 ` [PATCH net-next v3 04/10] r8169: use phy_ethtool_(g|s)et_link_ksettings Heiner Kallweit
2018-07-17 20:51 ` [PATCH net-next v3 05/10] r8169: use phy_ethtool_nway_reset Heiner Kallweit
2018-07-17 20:51 ` [PATCH net-next v3 06/10] r8169: use phy_mii_ioctl Heiner Kallweit
2018-07-17 20:51 ` Heiner Kallweit [this message]
2018-07-17 20:52 ` [PATCH net-next v3 08/10] r8169: remove rtl8169_set_speed_xmii Heiner Kallweit
2018-07-17 20:52 ` [PATCH net-next v3 09/10] r8169: remove mii_if_info member from struct rtl8169_private Heiner Kallweit
2018-07-17 20:52 ` [PATCH net-next v3 10/10] r8169: don't read chip phy status register Heiner Kallweit
2018-07-18  0:49 ` [PATCH net-next v3 00/10] r8169: add phylib support David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=34710b67-5a3e-21f4-dfcc-5f381bb45436@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).