From: Paul Menzel <pmenzel@molgen.mpg.de>
To: "Andreas K. Huettel" <andreas.huettel@ur.de>
Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
Jakub Kicinski <kubakici@wp.pl>
Subject: Re: [Intel-wired-lan] Intel I350 regression 5.10 -> 5.14 ("The NVM Checksum Is Not Valid") [8086:1521]
Date: Tue, 5 Oct 2021 11:34:21 +0200 [thread overview]
Message-ID: <35dfc9e8-431c-362d-450e-4c6ac1e55434@molgen.mpg.de> (raw)
In-Reply-To: <20211004074814.5900791a@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com>
Dear Andreas,
Am 04.10.21 um 16:48 schrieb Jakub Kicinski:
> On Mon, 04 Oct 2021 15:06:31 +0200 Andreas K. Huettel wrote:
>> I hope this is the right place to ask, if not please advise me where to go.
>
> Adding intel-wired-lan@lists.osuosl.org and Sasha as well.
>
>> I have a new Dell machine with both an Intel on-board ethernet controller
>> ([8086:15f9]) and an additional 2-port extension card ([8086:1521]).
>>
>> The second adaptor, a "DeLock PCIe 2xGBit", worked fine as far as I could
>> see with Linux 5.10.59, but fails to initialize with Linux 5.14.9.
>>
>> dilfridge ~ # lspci -nn
>> [...]
>> 01:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev ff)
>> 01:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev ff)
>> [...]
>>
>> dilfridge ~ # dmesg|grep igb
>> [ 2.069286] igb: Intel(R) Gigabit Ethernet Network Driver
>> [ 2.069288] igb: Copyright (c) 2007-2014 Intel Corporation.
>> [ 2.069305] igb 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
>> [ 2.069624] igb 0000:01:00.0 0000:01:00.0 (uninitialized): PCIe link lost
>> [ 2.386659] igb 0000:01:00.0: PHY reset is blocked due to SOL/IDER session.
>> [ 4.115500] igb 0000:01:00.0: The NVM Checksum Is Not Valid
>> [ 4.133807] igb: probe of 0000:01:00.0 failed with error -5
>> [ 4.133820] igb 0000:01:00.1: can't change power state from D3cold to D0 (config space inaccessible)
>> [ 4.134072] igb 0000:01:00.1 0000:01:00.1 (uninitialized): PCIe link lost
>> [ 4.451602] igb 0000:01:00.1: PHY reset is blocked due to SOL/IDER session.
>> [ 6.180123] igb 0000:01:00.1: The NVM Checksum Is Not Valid
>> [ 6.188631] igb: probe of 0000:01:00.1 failed with error -5
What messages are new compared to the working Linux 5.10.59?
>> Any advice on how to proceed? Willing to test patches and provide additional debug info.
Without any ideas about the issue, please bisect the issue to find the
commit introducing the regression, so it can be reverted/fixed to not
violate Linux’ no-regression policy.
Kind regards,
Paul
next prev parent reply other threads:[~2021-10-05 9:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-04 13:06 Intel I350 regression 5.10 -> 5.14 ("The NVM Checksum Is Not Valid") [8086:1521] Andreas K. Huettel
2021-10-04 14:48 ` Jakub Kicinski
2021-10-04 23:39 ` [Intel-wired-lan] " Hisashi T Fujinaka
2021-10-05 0:12 ` [EXT] " Andreas K. Huettel
2021-10-05 0:21 ` Hisashi T Fujinaka
2021-10-05 6:50 ` Sasha Neftin
2021-10-05 9:40 ` Paul Menzel
2021-10-05 18:20 ` Hisashi T Fujinaka
2021-10-05 9:34 ` Paul Menzel [this message]
2021-10-05 13:43 ` [EXT] " Andreas K. Huettel
2021-10-05 22:27 ` Jesse Brandeburg
2021-10-12 16:34 ` Andreas K. Huettel
2021-10-12 17:42 ` Paul Menzel
2021-10-12 17:58 ` Rafael J. Wysocki
2021-10-12 19:28 ` Andreas K. Huettel
2021-10-14 12:09 ` Rafael J. Wysocki
2021-10-15 14:00 ` Andreas K. Huettel
2021-10-15 18:42 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=35dfc9e8-431c-362d-450e-4c6ac1e55434@molgen.mpg.de \
--to=pmenzel@molgen.mpg.de \
--cc=andreas.huettel@ur.de \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=kubakici@wp.pl \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).