* [PATCH net-next v4 01/10] dt-bindings: net: Add support for AM65x SR1.0 in ICSSG
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-05 11:40 ` [PATCH net-next v4 02/10] eth: Move IPv4/IPv6 multicast address bases to their own symbols Diogo Ivo
` (9 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: danishanwar, rogerq, davem, edumazet, kuba, pabeni, robh+dt,
krzysztof.kozlowski+dt, conor+dt, linux-arm-kernel, netdev,
devicetree
Cc: Diogo Ivo, jan.kiszka, Conor Dooley
Silicon Revision 1.0 of the AM65x came with a slightly different ICSSG
support: Only 2 PRUs per slice are available and instead 2 additional
DMA channels are used for management purposes. We have no restrictions
on specified PRUs, but the DMA channels need to be adjusted.
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
---
Changes in v4:
- Added Reviewed-by tags from Roger and Conor
Changes in v3:
- Fixed dt_binding_check error by moving allOf
Changes in v2:
- Removed explicit reference to SR2.0
- Moved sr1 to the SoC name
- Expand dma-names list and adjust min/maxItems depending on SR1.0/2.0
.../bindings/net/ti,icssg-prueth.yaml | 35 +++++++++++++++----
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
index 229c8f32019f..e253fa786092 100644
--- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
+++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
@@ -13,14 +13,12 @@ description:
Ethernet based on the Programmable Real-Time Unit and Industrial
Communication Subsystem.
-allOf:
- - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
-
properties:
compatible:
enum:
- - ti,am642-icssg-prueth # for AM64x SoC family
- - ti,am654-icssg-prueth # for AM65x SoC family
+ - ti,am642-icssg-prueth # for AM64x SoC family
+ - ti,am654-icssg-prueth # for AM65x SoC family
+ - ti,am654-sr1-icssg-prueth # for AM65x SoC family, SR1.0
sram:
$ref: /schemas/types.yaml#/definitions/phandle
@@ -28,9 +26,11 @@ properties:
phandle to MSMC SRAM node
dmas:
- maxItems: 10
+ minItems: 10
+ maxItems: 12
dma-names:
+ minItems: 10
items:
- const: tx0-0
- const: tx0-1
@@ -42,6 +42,8 @@ properties:
- const: tx1-3
- const: rx0
- const: rx1
+ - const: rxmgm0
+ - const: rxmgm1
ti,mii-g-rt:
$ref: /schemas/types.yaml#/definitions/phandle
@@ -132,6 +134,27 @@ required:
- interrupts
- interrupt-names
+allOf:
+ - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,am654-sr1-icssg-prueth
+ then:
+ properties:
+ dmas:
+ minItems: 12
+ dma-names:
+ minItems: 12
+ else:
+ properties:
+ dmas:
+ maxItems: 10
+ dma-names:
+ maxItems: 10
+
unevaluatedProperties: false
examples:
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH net-next v4 02/10] eth: Move IPv4/IPv6 multicast address bases to their own symbols
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
2024-03-05 11:40 ` [PATCH net-next v4 01/10] dt-bindings: net: Add support for AM65x SR1.0 in ICSSG Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-05 11:40 ` [PATCH net-next v4 03/10] net: ti: icssg-prueth: Move common functions into a separate file Diogo Ivo
` (8 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: davem, edumazet, kuba, pabeni, netdev, andrew, danishanwar,
rogerq, vigneshr
Cc: Diogo Ivo, jan.kiszka
As these addresses can be useful outside of checking if an address
is a multicast address (for example in device drivers) make them
accessible to users of etherdevice.h to avoid code duplication.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
---
include/linux/etherdevice.h | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 224645f17c33..8d6daf828427 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -71,6 +71,12 @@ static const u8 eth_reserved_addr_base[ETH_ALEN] __aligned(2) =
{ 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 };
#define eth_stp_addr eth_reserved_addr_base
+static const u8 eth_ipv4_mcast_addr_base[ETH_ALEN] __aligned(2) =
+{ 0x01, 0x00, 0x5e, 0x00, 0x00, 0x00 };
+
+static const u8 eth_ipv6_mcast_addr_base[ETH_ALEN] __aligned(2) =
+{ 0x33, 0x33, 0x00, 0x00, 0x00, 0x00 };
+
/**
* is_link_local_ether_addr - Determine if given Ethernet address is link-local
* @addr: Pointer to a six-byte array containing the Ethernet address
@@ -430,18 +436,16 @@ static inline bool ether_addr_equal_masked(const u8 *addr1, const u8 *addr2,
static inline bool ether_addr_is_ipv4_mcast(const u8 *addr)
{
- u8 base[ETH_ALEN] = { 0x01, 0x00, 0x5e, 0x00, 0x00, 0x00 };
u8 mask[ETH_ALEN] = { 0xff, 0xff, 0xff, 0x80, 0x00, 0x00 };
- return ether_addr_equal_masked(addr, base, mask);
+ return ether_addr_equal_masked(addr, eth_ipv4_mcast_addr_base, mask);
}
static inline bool ether_addr_is_ipv6_mcast(const u8 *addr)
{
- u8 base[ETH_ALEN] = { 0x33, 0x33, 0x00, 0x00, 0x00, 0x00 };
u8 mask[ETH_ALEN] = { 0xff, 0xff, 0x00, 0x00, 0x00, 0x00 };
- return ether_addr_equal_masked(addr, base, mask);
+ return ether_addr_equal_masked(addr, eth_ipv6_mcast_addr_base, mask);
}
static inline bool ether_addr_is_ip_mcast(const u8 *addr)
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH net-next v4 03/10] net: ti: icssg-prueth: Move common functions into a separate file
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
2024-03-05 11:40 ` [PATCH net-next v4 01/10] dt-bindings: net: Add support for AM65x SR1.0 in ICSSG Diogo Ivo
2024-03-05 11:40 ` [PATCH net-next v4 02/10] eth: Move IPv4/IPv6 multicast address bases to their own symbols Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-05 11:40 ` [PATCH net-next v4 04/10] net: ti: icssg-prueth: Add SR1.0-specific configuration bits Diogo Ivo
` (7 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: davem, edumazet, kuba, pabeni, danishanwar, rogerq, andrew,
vigneshr, wsa+renesas, dan.carpenter, netdev, linux-arm-kernel
Cc: Diogo Ivo, jan.kiszka
In order to allow code sharing between Silicon Revisions 1.0 and 2.0
move all functions that can be shared into a common file. This commit
introduces no functional changes.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
---
drivers/net/ethernet/ti/Makefile | 1 +
drivers/net/ethernet/ti/icssg/icssg_common.c | 1198 ++++++++++++++++++
drivers/net/ethernet/ti/icssg/icssg_prueth.c | 1183 -----------------
drivers/net/ethernet/ti/icssg/icssg_prueth.h | 59 +
4 files changed, 1258 insertions(+), 1183 deletions(-)
create mode 100644 drivers/net/ethernet/ti/icssg/icssg_common.c
diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
index d8590304f3df..4876f20aa495 100644
--- a/drivers/net/ethernet/ti/Makefile
+++ b/drivers/net/ethernet/ti/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_TI_K3_AM65_CPTS) += am65-cpts.o
obj-$(CONFIG_TI_ICSSG_PRUETH) += icssg-prueth.o
icssg-prueth-y := icssg/icssg_prueth.o \
+ icssg/icssg_common.o \
icssg/icssg_classifier.o \
icssg/icssg_queues.o \
icssg/icssg_config.o \
diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
new file mode 100644
index 000000000000..99f27ecc9352
--- /dev/null
+++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
@@ -0,0 +1,1198 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Texas Instruments ICSSG Ethernet Driver
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) Siemens AG, 2024
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dma/ti-cppi5.h>
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/remoteproc/pruss.h>
+#include <linux/regmap.h>
+#include <linux/remoteproc.h>
+
+#include "icssg_prueth.h"
+#include "../k3-cppi-desc-pool.h"
+
+/* Netif debug messages possible */
+#define PRUETH_EMAC_DEBUG (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | \
+ NETIF_MSG_IFDOWN | \
+ NETIF_MSG_IFUP | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_TX_ERR | \
+ NETIF_MSG_TX_QUEUED | \
+ NETIF_MSG_INTR | \
+ NETIF_MSG_TX_DONE | \
+ NETIF_MSG_RX_STATUS | \
+ NETIF_MSG_PKTDATA | \
+ NETIF_MSG_HW | \
+ NETIF_MSG_WOL)
+
+#define prueth_napi_to_emac(napi) container_of(napi, struct prueth_emac, napi_rx)
+
+void prueth_cleanup_rx_chns(struct prueth_emac *emac,
+ struct prueth_rx_chn *rx_chn,
+ int max_rflows)
+{
+ if (rx_chn->desc_pool)
+ k3_cppi_desc_pool_destroy(rx_chn->desc_pool);
+
+ if (rx_chn->rx_chn)
+ k3_udma_glue_release_rx_chn(rx_chn->rx_chn);
+}
+
+void prueth_cleanup_tx_chns(struct prueth_emac *emac)
+{
+ int i;
+
+ for (i = 0; i < emac->tx_ch_num; i++) {
+ struct prueth_tx_chn *tx_chn = &emac->tx_chns[i];
+
+ if (tx_chn->desc_pool)
+ k3_cppi_desc_pool_destroy(tx_chn->desc_pool);
+
+ if (tx_chn->tx_chn)
+ k3_udma_glue_release_tx_chn(tx_chn->tx_chn);
+
+ /* Assume prueth_cleanup_tx_chns() is called at the
+ * end after all channel resources are freed
+ */
+ memset(tx_chn, 0, sizeof(*tx_chn));
+ }
+}
+
+void prueth_ndev_del_tx_napi(struct prueth_emac *emac, int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ struct prueth_tx_chn *tx_chn = &emac->tx_chns[i];
+
+ if (tx_chn->irq)
+ free_irq(tx_chn->irq, tx_chn);
+ netif_napi_del(&tx_chn->napi_tx);
+ }
+}
+
+void prueth_xmit_free(struct prueth_tx_chn *tx_chn,
+ struct cppi5_host_desc_t *desc)
+{
+ struct cppi5_host_desc_t *first_desc, *next_desc;
+ dma_addr_t buf_dma, next_desc_dma;
+ u32 buf_dma_len;
+
+ first_desc = desc;
+ next_desc = first_desc;
+
+ cppi5_hdesc_get_obuf(first_desc, &buf_dma, &buf_dma_len);
+ k3_udma_glue_tx_cppi5_to_dma_addr(tx_chn->tx_chn, &buf_dma);
+
+ dma_unmap_single(tx_chn->dma_dev, buf_dma, buf_dma_len,
+ DMA_TO_DEVICE);
+
+ next_desc_dma = cppi5_hdesc_get_next_hbdesc(first_desc);
+ k3_udma_glue_tx_cppi5_to_dma_addr(tx_chn->tx_chn, &next_desc_dma);
+ while (next_desc_dma) {
+ next_desc = k3_cppi_desc_pool_dma2virt(tx_chn->desc_pool,
+ next_desc_dma);
+ cppi5_hdesc_get_obuf(next_desc, &buf_dma, &buf_dma_len);
+ k3_udma_glue_tx_cppi5_to_dma_addr(tx_chn->tx_chn, &buf_dma);
+
+ dma_unmap_page(tx_chn->dma_dev, buf_dma, buf_dma_len,
+ DMA_TO_DEVICE);
+
+ next_desc_dma = cppi5_hdesc_get_next_hbdesc(next_desc);
+ k3_udma_glue_tx_cppi5_to_dma_addr(tx_chn->tx_chn, &next_desc_dma);
+
+ k3_cppi_desc_pool_free(tx_chn->desc_pool, next_desc);
+ }
+
+ k3_cppi_desc_pool_free(tx_chn->desc_pool, first_desc);
+}
+
+int emac_tx_complete_packets(struct prueth_emac *emac, int chn,
+ int budget)
+{
+ struct net_device *ndev = emac->ndev;
+ struct cppi5_host_desc_t *desc_tx;
+ struct netdev_queue *netif_txq;
+ struct prueth_tx_chn *tx_chn;
+ unsigned int total_bytes = 0;
+ struct sk_buff *skb;
+ dma_addr_t desc_dma;
+ int res, num_tx = 0;
+ void **swdata;
+
+ tx_chn = &emac->tx_chns[chn];
+
+ while (true) {
+ res = k3_udma_glue_pop_tx_chn(tx_chn->tx_chn, &desc_dma);
+ if (res == -ENODATA)
+ break;
+
+ /* teardown completion */
+ if (cppi5_desc_is_tdcm(desc_dma)) {
+ if (atomic_dec_and_test(&emac->tdown_cnt))
+ complete(&emac->tdown_complete);
+ break;
+ }
+
+ desc_tx = k3_cppi_desc_pool_dma2virt(tx_chn->desc_pool,
+ desc_dma);
+ swdata = cppi5_hdesc_get_swdata(desc_tx);
+
+ skb = *(swdata);
+ prueth_xmit_free(tx_chn, desc_tx);
+
+ ndev = skb->dev;
+ ndev->stats.tx_packets++;
+ ndev->stats.tx_bytes += skb->len;
+ total_bytes += skb->len;
+ napi_consume_skb(skb, budget);
+ num_tx++;
+ }
+
+ if (!num_tx)
+ return 0;
+
+ netif_txq = netdev_get_tx_queue(ndev, chn);
+ netdev_tx_completed_queue(netif_txq, num_tx, total_bytes);
+
+ if (netif_tx_queue_stopped(netif_txq)) {
+ /* If the TX queue was stopped, wake it now
+ * if we have enough room.
+ */
+ __netif_tx_lock(netif_txq, smp_processor_id());
+ if (netif_running(ndev) &&
+ (k3_cppi_desc_pool_avail(tx_chn->desc_pool) >=
+ MAX_SKB_FRAGS))
+ netif_tx_wake_queue(netif_txq);
+ __netif_tx_unlock(netif_txq);
+ }
+
+ return num_tx;
+}
+
+static int emac_napi_tx_poll(struct napi_struct *napi_tx, int budget)
+{
+ struct prueth_tx_chn *tx_chn = prueth_napi_to_tx_chn(napi_tx);
+ struct prueth_emac *emac = tx_chn->emac;
+ int num_tx_packets;
+
+ num_tx_packets = emac_tx_complete_packets(emac, tx_chn->id, budget);
+
+ if (num_tx_packets >= budget)
+ return budget;
+
+ if (napi_complete_done(napi_tx, num_tx_packets))
+ enable_irq(tx_chn->irq);
+
+ return num_tx_packets;
+}
+
+static irqreturn_t prueth_tx_irq(int irq, void *dev_id)
+{
+ struct prueth_tx_chn *tx_chn = dev_id;
+
+ disable_irq_nosync(irq);
+ napi_schedule(&tx_chn->napi_tx);
+
+ return IRQ_HANDLED;
+}
+
+int prueth_ndev_add_tx_napi(struct prueth_emac *emac)
+{
+ struct prueth *prueth = emac->prueth;
+ int i, ret;
+
+ for (i = 0; i < emac->tx_ch_num; i++) {
+ struct prueth_tx_chn *tx_chn = &emac->tx_chns[i];
+
+ netif_napi_add_tx(emac->ndev, &tx_chn->napi_tx, emac_napi_tx_poll);
+ ret = request_irq(tx_chn->irq, prueth_tx_irq,
+ IRQF_TRIGGER_HIGH, tx_chn->name,
+ tx_chn);
+ if (ret) {
+ netif_napi_del(&tx_chn->napi_tx);
+ dev_err(prueth->dev, "unable to request TX IRQ %d\n",
+ tx_chn->irq);
+ goto fail;
+ }
+ }
+
+ return 0;
+fail:
+ prueth_ndev_del_tx_napi(emac, i);
+ return ret;
+}
+
+int prueth_init_tx_chns(struct prueth_emac *emac)
+{
+ static const struct k3_ring_cfg ring_cfg = {
+ .elm_size = K3_RINGACC_RING_ELSIZE_8,
+ .mode = K3_RINGACC_RING_MODE_RING,
+ .flags = 0,
+ .size = PRUETH_MAX_TX_DESC,
+ };
+ struct k3_udma_glue_tx_channel_cfg tx_cfg;
+ struct device *dev = emac->prueth->dev;
+ struct net_device *ndev = emac->ndev;
+ int ret, slice, i;
+ u32 hdesc_size;
+
+ slice = prueth_emac_slice(emac);
+ if (slice < 0)
+ return slice;
+
+ init_completion(&emac->tdown_complete);
+
+ hdesc_size = cppi5_hdesc_calc_size(true, PRUETH_NAV_PS_DATA_SIZE,
+ PRUETH_NAV_SW_DATA_SIZE);
+ memset(&tx_cfg, 0, sizeof(tx_cfg));
+ tx_cfg.swdata_size = PRUETH_NAV_SW_DATA_SIZE;
+ tx_cfg.tx_cfg = ring_cfg;
+ tx_cfg.txcq_cfg = ring_cfg;
+
+ for (i = 0; i < emac->tx_ch_num; i++) {
+ struct prueth_tx_chn *tx_chn = &emac->tx_chns[i];
+
+ /* To differentiate channels for SLICE0 vs SLICE1 */
+ snprintf(tx_chn->name, sizeof(tx_chn->name),
+ "tx%d-%d", slice, i);
+
+ tx_chn->emac = emac;
+ tx_chn->id = i;
+ tx_chn->descs_num = PRUETH_MAX_TX_DESC;
+
+ tx_chn->tx_chn =
+ k3_udma_glue_request_tx_chn(dev, tx_chn->name,
+ &tx_cfg);
+ if (IS_ERR(tx_chn->tx_chn)) {
+ ret = PTR_ERR(tx_chn->tx_chn);
+ tx_chn->tx_chn = NULL;
+ netdev_err(ndev,
+ "Failed to request tx dma ch: %d\n", ret);
+ goto fail;
+ }
+
+ tx_chn->dma_dev = k3_udma_glue_tx_get_dma_device(tx_chn->tx_chn);
+ tx_chn->desc_pool =
+ k3_cppi_desc_pool_create_name(tx_chn->dma_dev,
+ tx_chn->descs_num,
+ hdesc_size,
+ tx_chn->name);
+ if (IS_ERR(tx_chn->desc_pool)) {
+ ret = PTR_ERR(tx_chn->desc_pool);
+ tx_chn->desc_pool = NULL;
+ netdev_err(ndev, "Failed to create tx pool: %d\n", ret);
+ goto fail;
+ }
+
+ ret = k3_udma_glue_tx_get_irq(tx_chn->tx_chn);
+ if (ret < 0) {
+ netdev_err(ndev, "failed to get tx irq\n");
+ goto fail;
+ }
+ tx_chn->irq = ret;
+
+ snprintf(tx_chn->name, sizeof(tx_chn->name), "%s-tx%d",
+ dev_name(dev), tx_chn->id);
+ }
+
+ return 0;
+
+fail:
+ prueth_cleanup_tx_chns(emac);
+ return ret;
+}
+
+int prueth_init_rx_chns(struct prueth_emac *emac,
+ struct prueth_rx_chn *rx_chn,
+ char *name, u32 max_rflows,
+ u32 max_desc_num)
+{
+ struct k3_udma_glue_rx_channel_cfg rx_cfg;
+ struct device *dev = emac->prueth->dev;
+ struct net_device *ndev = emac->ndev;
+ u32 fdqring_id, hdesc_size;
+ int i, ret = 0, slice;
+
+ slice = prueth_emac_slice(emac);
+ if (slice < 0)
+ return slice;
+
+ /* To differentiate channels for SLICE0 vs SLICE1 */
+ snprintf(rx_chn->name, sizeof(rx_chn->name), "%s%d", name, slice);
+
+ hdesc_size = cppi5_hdesc_calc_size(true, PRUETH_NAV_PS_DATA_SIZE,
+ PRUETH_NAV_SW_DATA_SIZE);
+ memset(&rx_cfg, 0, sizeof(rx_cfg));
+ rx_cfg.swdata_size = PRUETH_NAV_SW_DATA_SIZE;
+ rx_cfg.flow_id_num = max_rflows;
+ rx_cfg.flow_id_base = -1; /* udmax will auto select flow id base */
+
+ /* init all flows */
+ rx_chn->dev = dev;
+ rx_chn->descs_num = max_desc_num;
+
+ rx_chn->rx_chn = k3_udma_glue_request_rx_chn(dev, rx_chn->name,
+ &rx_cfg);
+ if (IS_ERR(rx_chn->rx_chn)) {
+ ret = PTR_ERR(rx_chn->rx_chn);
+ rx_chn->rx_chn = NULL;
+ netdev_err(ndev, "Failed to request rx dma ch: %d\n", ret);
+ goto fail;
+ }
+
+ rx_chn->dma_dev = k3_udma_glue_rx_get_dma_device(rx_chn->rx_chn);
+ rx_chn->desc_pool = k3_cppi_desc_pool_create_name(rx_chn->dma_dev,
+ rx_chn->descs_num,
+ hdesc_size,
+ rx_chn->name);
+ if (IS_ERR(rx_chn->desc_pool)) {
+ ret = PTR_ERR(rx_chn->desc_pool);
+ rx_chn->desc_pool = NULL;
+ netdev_err(ndev, "Failed to create rx pool: %d\n", ret);
+ goto fail;
+ }
+
+ emac->rx_flow_id_base = k3_udma_glue_rx_get_flow_id_base(rx_chn->rx_chn);
+ netdev_dbg(ndev, "flow id base = %d\n", emac->rx_flow_id_base);
+
+ fdqring_id = K3_RINGACC_RING_ID_ANY;
+ for (i = 0; i < rx_cfg.flow_id_num; i++) {
+ struct k3_ring_cfg rxring_cfg = {
+ .elm_size = K3_RINGACC_RING_ELSIZE_8,
+ .mode = K3_RINGACC_RING_MODE_RING,
+ .flags = 0,
+ };
+ struct k3_ring_cfg fdqring_cfg = {
+ .elm_size = K3_RINGACC_RING_ELSIZE_8,
+ .flags = K3_RINGACC_RING_SHARED,
+ };
+ struct k3_udma_glue_rx_flow_cfg rx_flow_cfg = {
+ .rx_cfg = rxring_cfg,
+ .rxfdq_cfg = fdqring_cfg,
+ .ring_rxq_id = K3_RINGACC_RING_ID_ANY,
+ .src_tag_lo_sel =
+ K3_UDMA_GLUE_SRC_TAG_LO_USE_REMOTE_SRC_TAG,
+ };
+
+ rx_flow_cfg.ring_rxfdq0_id = fdqring_id;
+ rx_flow_cfg.rx_cfg.size = max_desc_num;
+ rx_flow_cfg.rxfdq_cfg.size = max_desc_num;
+ rx_flow_cfg.rxfdq_cfg.mode = emac->prueth->pdata.fdqring_mode;
+
+ ret = k3_udma_glue_rx_flow_init(rx_chn->rx_chn,
+ i, &rx_flow_cfg);
+ if (ret) {
+ netdev_err(ndev, "Failed to init rx flow%d %d\n",
+ i, ret);
+ goto fail;
+ }
+ if (!i)
+ fdqring_id = k3_udma_glue_rx_flow_get_fdq_id(rx_chn->rx_chn,
+ i);
+ rx_chn->irq[i] = k3_udma_glue_rx_get_irq(rx_chn->rx_chn, i);
+ if (rx_chn->irq[i] <= 0) {
+ ret = rx_chn->irq[i];
+ netdev_err(ndev, "Failed to get rx dma irq");
+ goto fail;
+ }
+ }
+
+ return 0;
+
+fail:
+ prueth_cleanup_rx_chns(emac, rx_chn, max_rflows);
+ return ret;
+}
+
+int prueth_dma_rx_push(struct prueth_emac *emac,
+ struct sk_buff *skb,
+ struct prueth_rx_chn *rx_chn)
+{
+ struct net_device *ndev = emac->ndev;
+ struct cppi5_host_desc_t *desc_rx;
+ u32 pkt_len = skb_tailroom(skb);
+ dma_addr_t desc_dma;
+ dma_addr_t buf_dma;
+ void **swdata;
+
+ desc_rx = k3_cppi_desc_pool_alloc(rx_chn->desc_pool);
+ if (!desc_rx) {
+ netdev_err(ndev, "rx push: failed to allocate descriptor\n");
+ return -ENOMEM;
+ }
+ desc_dma = k3_cppi_desc_pool_virt2dma(rx_chn->desc_pool, desc_rx);
+
+ buf_dma = dma_map_single(rx_chn->dma_dev, skb->data, pkt_len, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(rx_chn->dma_dev, buf_dma))) {
+ k3_cppi_desc_pool_free(rx_chn->desc_pool, desc_rx);
+ netdev_err(ndev, "rx push: failed to map rx pkt buffer\n");
+ return -EINVAL;
+ }
+
+ cppi5_hdesc_init(desc_rx, CPPI5_INFO0_HDESC_EPIB_PRESENT,
+ PRUETH_NAV_PS_DATA_SIZE);
+ k3_udma_glue_rx_dma_to_cppi5_addr(rx_chn->rx_chn, &buf_dma);
+ cppi5_hdesc_attach_buf(desc_rx, buf_dma, skb_tailroom(skb), buf_dma, skb_tailroom(skb));
+
+ swdata = cppi5_hdesc_get_swdata(desc_rx);
+ *swdata = skb;
+
+ return k3_udma_glue_push_rx_chn(rx_chn->rx_chn, 0,
+ desc_rx, desc_dma);
+}
+
+u64 icssg_ts_to_ns(u32 hi_sw, u32 hi, u32 lo, u32 cycle_time_ns)
+{
+ u32 iepcount_lo, iepcount_hi, hi_rollover_count;
+ u64 ns;
+
+ iepcount_lo = lo & GENMASK(19, 0);
+ iepcount_hi = (hi & GENMASK(11, 0)) << 12 | lo >> 20;
+ hi_rollover_count = hi >> 11;
+
+ ns = ((u64)hi_rollover_count) << 23 | (iepcount_hi + hi_sw);
+ ns = ns * cycle_time_ns + iepcount_lo;
+
+ return ns;
+}
+
+void emac_rx_timestamp(struct prueth_emac *emac,
+ struct sk_buff *skb, u32 *psdata)
+{
+ struct skb_shared_hwtstamps *ssh;
+ u64 ns;
+
+ u32 hi_sw = readl(emac->prueth->shram.va +
+ TIMESYNC_FW_WC_COUNT_HI_SW_OFFSET_OFFSET);
+ ns = icssg_ts_to_ns(hi_sw, psdata[1], psdata[0],
+ IEP_DEFAULT_CYCLE_TIME_NS);
+
+ ssh = skb_hwtstamps(skb);
+ memset(ssh, 0, sizeof(*ssh));
+ ssh->hwtstamp = ns_to_ktime(ns);
+}
+
+static int emac_rx_packet(struct prueth_emac *emac, u32 flow_id)
+{
+ struct prueth_rx_chn *rx_chn = &emac->rx_chns;
+ u32 buf_dma_len, pkt_len, port_id = 0;
+ struct net_device *ndev = emac->ndev;
+ struct cppi5_host_desc_t *desc_rx;
+ struct sk_buff *skb, *new_skb;
+ dma_addr_t desc_dma, buf_dma;
+ void **swdata;
+ u32 *psdata;
+ int ret;
+
+ ret = k3_udma_glue_pop_rx_chn(rx_chn->rx_chn, flow_id, &desc_dma);
+ if (ret) {
+ if (ret != -ENODATA)
+ netdev_err(ndev, "rx pop: failed: %d\n", ret);
+ return ret;
+ }
+
+ if (cppi5_desc_is_tdcm(desc_dma)) /* Teardown ? */
+ return 0;
+
+ desc_rx = k3_cppi_desc_pool_dma2virt(rx_chn->desc_pool, desc_dma);
+
+ swdata = cppi5_hdesc_get_swdata(desc_rx);
+ skb = *swdata;
+
+ psdata = cppi5_hdesc_get_psdata(desc_rx);
+ /* RX HW timestamp */
+ if (emac->rx_ts_enabled)
+ emac_rx_timestamp(emac, skb, psdata);
+
+ cppi5_hdesc_get_obuf(desc_rx, &buf_dma, &buf_dma_len);
+ k3_udma_glue_rx_cppi5_to_dma_addr(rx_chn->rx_chn, &buf_dma);
+ pkt_len = cppi5_hdesc_get_pktlen(desc_rx);
+ /* firmware adds 4 CRC bytes, strip them */
+ pkt_len -= 4;
+ cppi5_desc_get_tags_ids(&desc_rx->hdr, &port_id, NULL);
+
+ dma_unmap_single(rx_chn->dma_dev, buf_dma, buf_dma_len, DMA_FROM_DEVICE);
+ k3_cppi_desc_pool_free(rx_chn->desc_pool, desc_rx);
+
+ skb->dev = ndev;
+ new_skb = netdev_alloc_skb_ip_align(ndev, PRUETH_MAX_PKT_SIZE);
+ /* if allocation fails we drop the packet but push the
+ * descriptor back to the ring with old skb to prevent a stall
+ */
+ if (!new_skb) {
+ ndev->stats.rx_dropped++;
+ new_skb = skb;
+ } else {
+ /* send the filled skb up the n/w stack */
+ skb_put(skb, pkt_len);
+ skb->protocol = eth_type_trans(skb, ndev);
+ napi_gro_receive(&emac->napi_rx, skb);
+ ndev->stats.rx_bytes += pkt_len;
+ ndev->stats.rx_packets++;
+ }
+
+ /* queue another RX DMA */
+ ret = prueth_dma_rx_push(emac, new_skb, &emac->rx_chns);
+ if (WARN_ON(ret < 0)) {
+ dev_kfree_skb_any(new_skb);
+ ndev->stats.rx_errors++;
+ ndev->stats.rx_dropped++;
+ }
+
+ return ret;
+}
+
+static void prueth_rx_cleanup(void *data, dma_addr_t desc_dma)
+{
+ struct prueth_rx_chn *rx_chn = data;
+ struct cppi5_host_desc_t *desc_rx;
+ struct sk_buff *skb;
+ dma_addr_t buf_dma;
+ u32 buf_dma_len;
+ void **swdata;
+
+ desc_rx = k3_cppi_desc_pool_dma2virt(rx_chn->desc_pool, desc_dma);
+ swdata = cppi5_hdesc_get_swdata(desc_rx);
+ skb = *swdata;
+ cppi5_hdesc_get_obuf(desc_rx, &buf_dma, &buf_dma_len);
+ k3_udma_glue_rx_cppi5_to_dma_addr(rx_chn->rx_chn, &buf_dma);
+
+ dma_unmap_single(rx_chn->dma_dev, buf_dma, buf_dma_len,
+ DMA_FROM_DEVICE);
+ k3_cppi_desc_pool_free(rx_chn->desc_pool, desc_rx);
+
+ dev_kfree_skb_any(skb);
+}
+
+static int prueth_tx_ts_cookie_get(struct prueth_emac *emac)
+{
+ int i;
+
+ /* search and get the next free slot */
+ for (i = 0; i < PRUETH_MAX_TX_TS_REQUESTS; i++) {
+ if (!emac->tx_ts_skb[i]) {
+ emac->tx_ts_skb[i] = ERR_PTR(-EBUSY); /* reserve slot */
+ return i;
+ }
+ }
+
+ return -EBUSY;
+}
+
+/**
+ * emac_ndo_start_xmit - EMAC Transmit function
+ * @skb: SKB pointer
+ * @ndev: EMAC network adapter
+ *
+ * Called by the system to transmit a packet - we queue the packet in
+ * EMAC hardware transmit queue
+ * Doesn't wait for completion we'll check for TX completion in
+ * emac_tx_complete_packets().
+ *
+ * Return: enum netdev_tx
+ */
+enum netdev_tx emac_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct cppi5_host_desc_t *first_desc, *next_desc, *cur_desc;
+ struct prueth_emac *emac = netdev_priv(ndev);
+ struct netdev_queue *netif_txq;
+ struct prueth_tx_chn *tx_chn;
+ dma_addr_t desc_dma, buf_dma;
+ int i, ret = 0, q_idx;
+ bool in_tx_ts = 0;
+ int tx_ts_cookie;
+ void **swdata;
+ u32 pkt_len;
+ u32 *epib;
+
+ pkt_len = skb_headlen(skb);
+ q_idx = skb_get_queue_mapping(skb);
+
+ tx_chn = &emac->tx_chns[q_idx];
+ netif_txq = netdev_get_tx_queue(ndev, q_idx);
+
+ /* Map the linear buffer */
+ buf_dma = dma_map_single(tx_chn->dma_dev, skb->data, pkt_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(tx_chn->dma_dev, buf_dma)) {
+ netdev_err(ndev, "tx: failed to map skb buffer\n");
+ ret = NETDEV_TX_OK;
+ goto drop_free_skb;
+ }
+
+ first_desc = k3_cppi_desc_pool_alloc(tx_chn->desc_pool);
+ if (!first_desc) {
+ netdev_dbg(ndev, "tx: failed to allocate descriptor\n");
+ dma_unmap_single(tx_chn->dma_dev, buf_dma, pkt_len, DMA_TO_DEVICE);
+ goto drop_stop_q_busy;
+ }
+
+ cppi5_hdesc_init(first_desc, CPPI5_INFO0_HDESC_EPIB_PRESENT,
+ PRUETH_NAV_PS_DATA_SIZE);
+ cppi5_hdesc_set_pkttype(first_desc, 0);
+ epib = first_desc->epib;
+ epib[0] = 0;
+ epib[1] = 0;
+ if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
+ emac->tx_ts_enabled) {
+ tx_ts_cookie = prueth_tx_ts_cookie_get(emac);
+ if (tx_ts_cookie >= 0) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ /* Request TX timestamp */
+ epib[0] = (u32)tx_ts_cookie;
+ epib[1] = 0x80000000; /* TX TS request */
+ emac->tx_ts_skb[tx_ts_cookie] = skb_get(skb);
+ in_tx_ts = 1;
+ }
+ }
+
+ /* set dst tag to indicate internal qid at the firmware which is at
+ * bit8..bit15. bit0..bit7 indicates port num for directed
+ * packets in case of switch mode operation
+ */
+ cppi5_desc_set_tags_ids(&first_desc->hdr, 0, (emac->port_id | (q_idx << 8)));
+ k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
+ cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
+ swdata = cppi5_hdesc_get_swdata(first_desc);
+ *swdata = skb;
+
+ /* Handle the case where skb is fragmented in pages */
+ cur_desc = first_desc;
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ u32 frag_size = skb_frag_size(frag);
+
+ next_desc = k3_cppi_desc_pool_alloc(tx_chn->desc_pool);
+ if (!next_desc) {
+ netdev_err(ndev,
+ "tx: failed to allocate frag. descriptor\n");
+ goto free_desc_stop_q_busy_cleanup_tx_ts;
+ }
+
+ buf_dma = skb_frag_dma_map(tx_chn->dma_dev, frag, 0, frag_size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(tx_chn->dma_dev, buf_dma)) {
+ netdev_err(ndev, "tx: Failed to map skb page\n");
+ k3_cppi_desc_pool_free(tx_chn->desc_pool, next_desc);
+ ret = NETDEV_TX_OK;
+ goto cleanup_tx_ts;
+ }
+
+ cppi5_hdesc_reset_hbdesc(next_desc);
+ k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
+ cppi5_hdesc_attach_buf(next_desc,
+ buf_dma, frag_size, buf_dma, frag_size);
+
+ desc_dma = k3_cppi_desc_pool_virt2dma(tx_chn->desc_pool,
+ next_desc);
+ k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &desc_dma);
+ cppi5_hdesc_link_hbdesc(cur_desc, desc_dma);
+
+ pkt_len += frag_size;
+ cur_desc = next_desc;
+ }
+ WARN_ON_ONCE(pkt_len != skb->len);
+
+ /* report bql before sending packet */
+ netdev_tx_sent_queue(netif_txq, pkt_len);
+
+ cppi5_hdesc_set_pktlen(first_desc, pkt_len);
+ desc_dma = k3_cppi_desc_pool_virt2dma(tx_chn->desc_pool, first_desc);
+ /* cppi5_desc_dump(first_desc, 64); */
+
+ skb_tx_timestamp(skb); /* SW timestamp if SKBTX_IN_PROGRESS not set */
+ ret = k3_udma_glue_push_tx_chn(tx_chn->tx_chn, first_desc, desc_dma);
+ if (ret) {
+ netdev_err(ndev, "tx: push failed: %d\n", ret);
+ goto drop_free_descs;
+ }
+
+ if (in_tx_ts)
+ atomic_inc(&emac->tx_ts_pending);
+
+ if (k3_cppi_desc_pool_avail(tx_chn->desc_pool) < MAX_SKB_FRAGS) {
+ netif_tx_stop_queue(netif_txq);
+ /* Barrier, so that stop_queue visible to other cpus */
+ smp_mb__after_atomic();
+
+ if (k3_cppi_desc_pool_avail(tx_chn->desc_pool) >=
+ MAX_SKB_FRAGS)
+ netif_tx_wake_queue(netif_txq);
+ }
+
+ return NETDEV_TX_OK;
+
+cleanup_tx_ts:
+ if (in_tx_ts) {
+ dev_kfree_skb_any(emac->tx_ts_skb[tx_ts_cookie]);
+ emac->tx_ts_skb[tx_ts_cookie] = NULL;
+ }
+
+drop_free_descs:
+ prueth_xmit_free(tx_chn, first_desc);
+
+drop_free_skb:
+ dev_kfree_skb_any(skb);
+
+ /* error */
+ ndev->stats.tx_dropped++;
+ netdev_err(ndev, "tx: error: %d\n", ret);
+
+ return ret;
+
+free_desc_stop_q_busy_cleanup_tx_ts:
+ if (in_tx_ts) {
+ dev_kfree_skb_any(emac->tx_ts_skb[tx_ts_cookie]);
+ emac->tx_ts_skb[tx_ts_cookie] = NULL;
+ }
+ prueth_xmit_free(tx_chn, first_desc);
+
+drop_stop_q_busy:
+ netif_tx_stop_queue(netif_txq);
+ return NETDEV_TX_BUSY;
+}
+
+static void prueth_tx_cleanup(void *data, dma_addr_t desc_dma)
+{
+ struct prueth_tx_chn *tx_chn = data;
+ struct cppi5_host_desc_t *desc_tx;
+ struct sk_buff *skb;
+ void **swdata;
+
+ desc_tx = k3_cppi_desc_pool_dma2virt(tx_chn->desc_pool, desc_dma);
+ swdata = cppi5_hdesc_get_swdata(desc_tx);
+ skb = *(swdata);
+ prueth_xmit_free(tx_chn, desc_tx);
+
+ dev_kfree_skb_any(skb);
+}
+
+irqreturn_t prueth_rx_irq(int irq, void *dev_id)
+{
+ struct prueth_emac *emac = dev_id;
+
+ disable_irq_nosync(irq);
+ napi_schedule(&emac->napi_rx);
+
+ return IRQ_HANDLED;
+}
+
+void prueth_emac_stop(struct prueth_emac *emac)
+{
+ struct prueth *prueth = emac->prueth;
+ int slice;
+
+ switch (emac->port_id) {
+ case PRUETH_PORT_MII0:
+ slice = ICSS_SLICE0;
+ break;
+ case PRUETH_PORT_MII1:
+ slice = ICSS_SLICE1;
+ break;
+ default:
+ netdev_err(emac->ndev, "invalid port\n");
+ return;
+ }
+
+ emac->fw_running = 0;
+ rproc_shutdown(prueth->txpru[slice]);
+ rproc_shutdown(prueth->rtu[slice]);
+ rproc_shutdown(prueth->pru[slice]);
+}
+
+void prueth_cleanup_tx_ts(struct prueth_emac *emac)
+{
+ int i;
+
+ for (i = 0; i < PRUETH_MAX_TX_TS_REQUESTS; i++) {
+ if (emac->tx_ts_skb[i]) {
+ dev_kfree_skb_any(emac->tx_ts_skb[i]);
+ emac->tx_ts_skb[i] = NULL;
+ }
+ }
+}
+
+int emac_napi_rx_poll(struct napi_struct *napi_rx, int budget)
+{
+ struct prueth_emac *emac = prueth_napi_to_emac(napi_rx);
+ int rx_flow = PRUETH_RX_FLOW_DATA;
+ int flow = PRUETH_MAX_RX_FLOWS;
+ int num_rx = 0;
+ int cur_budget;
+ int ret;
+
+ while (flow--) {
+ cur_budget = budget - num_rx;
+
+ while (cur_budget--) {
+ ret = emac_rx_packet(emac, flow);
+ if (ret)
+ break;
+ num_rx++;
+ }
+
+ if (num_rx >= budget)
+ break;
+ }
+
+ if (num_rx < budget && napi_complete_done(napi_rx, num_rx))
+ enable_irq(emac->rx_chns.irq[rx_flow]);
+
+ return num_rx;
+}
+
+int prueth_prepare_rx_chan(struct prueth_emac *emac,
+ struct prueth_rx_chn *chn,
+ int buf_size)
+{
+ struct sk_buff *skb;
+ int i, ret;
+
+ for (i = 0; i < chn->descs_num; i++) {
+ skb = __netdev_alloc_skb_ip_align(NULL, buf_size, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ ret = prueth_dma_rx_push(emac, skb, chn);
+ if (ret < 0) {
+ netdev_err(emac->ndev,
+ "cannot submit skb for rx chan %s ret %d\n",
+ chn->name, ret);
+ kfree_skb(skb);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+void prueth_reset_tx_chan(struct prueth_emac *emac, int ch_num,
+ bool free_skb)
+{
+ int i;
+
+ for (i = 0; i < ch_num; i++) {
+ if (free_skb)
+ k3_udma_glue_reset_tx_chn(emac->tx_chns[i].tx_chn,
+ &emac->tx_chns[i],
+ prueth_tx_cleanup);
+ k3_udma_glue_disable_tx_chn(emac->tx_chns[i].tx_chn);
+ }
+}
+
+void prueth_reset_rx_chan(struct prueth_rx_chn *chn,
+ int num_flows, bool disable)
+{
+ int i;
+
+ for (i = 0; i < num_flows; i++)
+ k3_udma_glue_reset_rx_chn(chn->rx_chn, i, chn,
+ prueth_rx_cleanup, !!i);
+ if (disable)
+ k3_udma_glue_disable_rx_chn(chn->rx_chn);
+}
+
+void emac_ndo_tx_timeout(struct net_device *ndev, unsigned int txqueue)
+{
+ ndev->stats.tx_errors++;
+}
+
+static int emac_set_ts_config(struct net_device *ndev, struct ifreq *ifr)
+{
+ struct prueth_emac *emac = netdev_priv(ndev);
+ struct hwtstamp_config config;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ switch (config.tx_type) {
+ case HWTSTAMP_TX_OFF:
+ emac->tx_ts_enabled = 0;
+ break;
+ case HWTSTAMP_TX_ON:
+ emac->tx_ts_enabled = 1;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config.rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ emac->rx_ts_enabled = 0;
+ break;
+ case HWTSTAMP_FILTER_ALL:
+ case HWTSTAMP_FILTER_SOME:
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ case HWTSTAMP_FILTER_NTP_ALL:
+ emac->rx_ts_enabled = 1;
+ config.rx_filter = HWTSTAMP_FILTER_ALL;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+ -EFAULT : 0;
+}
+
+static int emac_get_ts_config(struct net_device *ndev, struct ifreq *ifr)
+{
+ struct prueth_emac *emac = netdev_priv(ndev);
+ struct hwtstamp_config config;
+
+ config.flags = 0;
+ config.tx_type = emac->tx_ts_enabled ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
+ config.rx_filter = emac->rx_ts_enabled ? HWTSTAMP_FILTER_ALL : HWTSTAMP_FILTER_NONE;
+
+ return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+ -EFAULT : 0;
+}
+
+int emac_ndo_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGHWTSTAMP:
+ return emac_get_ts_config(ndev, ifr);
+ case SIOCSHWTSTAMP:
+ return emac_set_ts_config(ndev, ifr);
+ default:
+ break;
+ }
+
+ return phy_do_ioctl(ndev, ifr, cmd);
+}
+
+void emac_ndo_get_stats64(struct net_device *ndev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct prueth_emac *emac = netdev_priv(ndev);
+
+ emac_update_hardware_stats(emac);
+
+ stats->rx_packets = emac_get_stat_by_name(emac, "rx_packets");
+ stats->rx_bytes = emac_get_stat_by_name(emac, "rx_bytes");
+ stats->tx_packets = emac_get_stat_by_name(emac, "tx_packets");
+ stats->tx_bytes = emac_get_stat_by_name(emac, "tx_bytes");
+ stats->rx_crc_errors = emac_get_stat_by_name(emac, "rx_crc_errors");
+ stats->rx_over_errors = emac_get_stat_by_name(emac, "rx_over_errors");
+ stats->multicast = emac_get_stat_by_name(emac, "rx_multicast_frames");
+
+ stats->rx_errors = ndev->stats.rx_errors;
+ stats->rx_dropped = ndev->stats.rx_dropped;
+ stats->tx_errors = ndev->stats.tx_errors;
+ stats->tx_dropped = ndev->stats.tx_dropped;
+}
+
+int emac_ndo_get_phys_port_name(struct net_device *ndev, char *name,
+ size_t len)
+{
+ struct prueth_emac *emac = netdev_priv(ndev);
+ int ret;
+
+ ret = snprintf(name, len, "p%d", emac->port_id);
+ if (ret >= len)
+ return -EINVAL;
+
+ return 0;
+}
+
+/* get emac_port corresponding to eth_node name */
+int prueth_node_port(struct device_node *eth_node)
+{
+ u32 port_id;
+ int ret;
+
+ ret = of_property_read_u32(eth_node, "reg", &port_id);
+ if (ret)
+ return ret;
+
+ if (port_id == 0)
+ return PRUETH_PORT_MII0;
+ else if (port_id == 1)
+ return PRUETH_PORT_MII1;
+ else
+ return PRUETH_PORT_INVALID;
+}
+
+/* get MAC instance corresponding to eth_node name */
+int prueth_node_mac(struct device_node *eth_node)
+{
+ u32 port_id;
+ int ret;
+
+ ret = of_property_read_u32(eth_node, "reg", &port_id);
+ if (ret)
+ return ret;
+
+ if (port_id == 0)
+ return PRUETH_MAC0;
+ else if (port_id == 1)
+ return PRUETH_MAC1;
+ else
+ return PRUETH_MAC_INVALID;
+}
+
+void prueth_netdev_exit(struct prueth *prueth,
+ struct device_node *eth_node)
+{
+ struct prueth_emac *emac;
+ enum prueth_mac mac;
+
+ mac = prueth_node_mac(eth_node);
+ if (mac == PRUETH_MAC_INVALID)
+ return;
+
+ emac = prueth->emac[mac];
+ if (!emac)
+ return;
+
+ if (of_phy_is_fixed_link(emac->phy_node))
+ of_phy_deregister_fixed_link(emac->phy_node);
+
+ netif_napi_del(&emac->napi_rx);
+
+ pruss_release_mem_region(prueth->pruss, &emac->dram);
+ destroy_workqueue(emac->cmd_wq);
+ free_netdev(emac->ndev);
+ prueth->emac[mac] = NULL;
+}
+
+int prueth_get_cores(struct prueth *prueth, int slice)
+{
+ struct device *dev = prueth->dev;
+ enum pruss_pru_id pruss_id;
+ struct device_node *np;
+ int idx = -1, ret;
+
+ np = dev->of_node;
+
+ switch (slice) {
+ case ICSS_SLICE0:
+ idx = 0;
+ break;
+ case ICSS_SLICE1:
+ idx = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ prueth->pru[slice] = pru_rproc_get(np, idx, &pruss_id);
+ if (IS_ERR(prueth->pru[slice])) {
+ ret = PTR_ERR(prueth->pru[slice]);
+ prueth->pru[slice] = NULL;
+ return dev_err_probe(dev, ret, "unable to get PRU%d\n", slice);
+ }
+ prueth->pru_id[slice] = pruss_id;
+
+ idx++;
+ prueth->rtu[slice] = pru_rproc_get(np, idx, NULL);
+ if (IS_ERR(prueth->rtu[slice])) {
+ ret = PTR_ERR(prueth->rtu[slice]);
+ prueth->rtu[slice] = NULL;
+ return dev_err_probe(dev, ret, "unable to get RTU%d\n", slice);
+ }
+
+ idx++;
+ prueth->txpru[slice] = pru_rproc_get(np, idx, NULL);
+ if (IS_ERR(prueth->txpru[slice])) {
+ ret = PTR_ERR(prueth->txpru[slice]);
+ prueth->txpru[slice] = NULL;
+ return dev_err_probe(dev, ret, "unable to get TX_PRU%d\n", slice);
+ }
+
+ return 0;
+}
+
+void prueth_put_cores(struct prueth *prueth, int slice)
+{
+ if (prueth->txpru[slice])
+ pru_rproc_put(prueth->txpru[slice]);
+
+ if (prueth->rtu[slice])
+ pru_rproc_put(prueth->rtu[slice]);
+
+ if (prueth->pru[slice])
+ pru_rproc_put(prueth->pru[slice]);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int prueth_suspend(struct device *dev)
+{
+ struct prueth *prueth = dev_get_drvdata(dev);
+ struct net_device *ndev;
+ int i, ret;
+
+ for (i = 0; i < PRUETH_NUM_MACS; i++) {
+ ndev = prueth->registered_netdevs[i];
+
+ if (!ndev)
+ continue;
+
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ ret = ndev->netdev_ops->ndo_stop(ndev);
+ if (ret < 0) {
+ netdev_err(ndev, "failed to stop: %d", ret);
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int prueth_resume(struct device *dev)
+{
+ struct prueth *prueth = dev_get_drvdata(dev);
+ struct net_device *ndev;
+ int i, ret;
+
+ for (i = 0; i < PRUETH_NUM_MACS; i++) {
+ ndev = prueth->registered_netdevs[i];
+
+ if (!ndev)
+ continue;
+
+ if (netif_running(ndev)) {
+ ret = ndev->netdev_ops->ndo_open(ndev);
+ if (ret < 0) {
+ netdev_err(ndev, "failed to start: %d", ret);
+ return ret;
+ }
+ netif_device_attach(ndev);
+ }
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+const struct dev_pm_ops prueth_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(prueth_suspend, prueth_resume)
+};
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index cf7b73f8f450..e6eac01f9f99 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -34,568 +34,9 @@
#define PRUETH_MODULE_DESCRIPTION "PRUSS ICSSG Ethernet driver"
-/* Netif debug messages possible */
-#define PRUETH_EMAC_DEBUG (NETIF_MSG_DRV | \
- NETIF_MSG_PROBE | \
- NETIF_MSG_LINK | \
- NETIF_MSG_TIMER | \
- NETIF_MSG_IFDOWN | \
- NETIF_MSG_IFUP | \
- NETIF_MSG_RX_ERR | \
- NETIF_MSG_TX_ERR | \
- NETIF_MSG_TX_QUEUED | \
- NETIF_MSG_INTR | \
- NETIF_MSG_TX_DONE | \
- NETIF_MSG_RX_STATUS | \
- NETIF_MSG_PKTDATA | \
- NETIF_MSG_HW | \
- NETIF_MSG_WOL)
-
-#define prueth_napi_to_emac(napi) container_of(napi, struct prueth_emac, napi_rx)
-
/* CTRLMMR_ICSSG_RGMII_CTRL register bits */
#define ICSSG_CTRL_RGMII_ID_MODE BIT(24)
-#define IEP_DEFAULT_CYCLE_TIME_NS 1000000 /* 1 ms */
-
-static void prueth_cleanup_rx_chns(struct prueth_emac *emac,
- struct prueth_rx_chn *rx_chn,
- int max_rflows)
-{
- if (rx_chn->desc_pool)
- k3_cppi_desc_pool_destroy(rx_chn->desc_pool);
-
- if (rx_chn->rx_chn)
- k3_udma_glue_release_rx_chn(rx_chn->rx_chn);
-}
-
-static void prueth_cleanup_tx_chns(struct prueth_emac *emac)
-{
- int i;
-
- for (i = 0; i < emac->tx_ch_num; i++) {
- struct prueth_tx_chn *tx_chn = &emac->tx_chns[i];
-
- if (tx_chn->desc_pool)
- k3_cppi_desc_pool_destroy(tx_chn->desc_pool);
-
- if (tx_chn->tx_chn)
- k3_udma_glue_release_tx_chn(tx_chn->tx_chn);
-
- /* Assume prueth_cleanup_tx_chns() is called at the
- * end after all channel resources are freed
- */
- memset(tx_chn, 0, sizeof(*tx_chn));
- }
-}
-
-static void prueth_ndev_del_tx_napi(struct prueth_emac *emac, int num)
-{
- int i;
-
- for (i = 0; i < num; i++) {
- struct prueth_tx_chn *tx_chn = &emac->tx_chns[i];
-
- if (tx_chn->irq)
- free_irq(tx_chn->irq, tx_chn);
- netif_napi_del(&tx_chn->napi_tx);
- }
-}
-
-static void prueth_xmit_free(struct prueth_tx_chn *tx_chn,
- struct cppi5_host_desc_t *desc)
-{
- struct cppi5_host_desc_t *first_desc, *next_desc;
- dma_addr_t buf_dma, next_desc_dma;
- u32 buf_dma_len;
-
- first_desc = desc;
- next_desc = first_desc;
-
- cppi5_hdesc_get_obuf(first_desc, &buf_dma, &buf_dma_len);
- k3_udma_glue_tx_cppi5_to_dma_addr(tx_chn->tx_chn, &buf_dma);
-
- dma_unmap_single(tx_chn->dma_dev, buf_dma, buf_dma_len,
- DMA_TO_DEVICE);
-
- next_desc_dma = cppi5_hdesc_get_next_hbdesc(first_desc);
- k3_udma_glue_tx_cppi5_to_dma_addr(tx_chn->tx_chn, &next_desc_dma);
- while (next_desc_dma) {
- next_desc = k3_cppi_desc_pool_dma2virt(tx_chn->desc_pool,
- next_desc_dma);
- cppi5_hdesc_get_obuf(next_desc, &buf_dma, &buf_dma_len);
- k3_udma_glue_tx_cppi5_to_dma_addr(tx_chn->tx_chn, &buf_dma);
-
- dma_unmap_page(tx_chn->dma_dev, buf_dma, buf_dma_len,
- DMA_TO_DEVICE);
-
- next_desc_dma = cppi5_hdesc_get_next_hbdesc(next_desc);
- k3_udma_glue_tx_cppi5_to_dma_addr(tx_chn->tx_chn, &next_desc_dma);
-
- k3_cppi_desc_pool_free(tx_chn->desc_pool, next_desc);
- }
-
- k3_cppi_desc_pool_free(tx_chn->desc_pool, first_desc);
-}
-
-static int emac_tx_complete_packets(struct prueth_emac *emac, int chn,
- int budget)
-{
- struct net_device *ndev = emac->ndev;
- struct cppi5_host_desc_t *desc_tx;
- struct netdev_queue *netif_txq;
- struct prueth_tx_chn *tx_chn;
- unsigned int total_bytes = 0;
- struct sk_buff *skb;
- dma_addr_t desc_dma;
- int res, num_tx = 0;
- void **swdata;
-
- tx_chn = &emac->tx_chns[chn];
-
- while (true) {
- res = k3_udma_glue_pop_tx_chn(tx_chn->tx_chn, &desc_dma);
- if (res == -ENODATA)
- break;
-
- /* teardown completion */
- if (cppi5_desc_is_tdcm(desc_dma)) {
- if (atomic_dec_and_test(&emac->tdown_cnt))
- complete(&emac->tdown_complete);
- break;
- }
-
- desc_tx = k3_cppi_desc_pool_dma2virt(tx_chn->desc_pool,
- desc_dma);
- swdata = cppi5_hdesc_get_swdata(desc_tx);
-
- skb = *(swdata);
- prueth_xmit_free(tx_chn, desc_tx);
-
- ndev = skb->dev;
- ndev->stats.tx_packets++;
- ndev->stats.tx_bytes += skb->len;
- total_bytes += skb->len;
- napi_consume_skb(skb, budget);
- num_tx++;
- }
-
- if (!num_tx)
- return 0;
-
- netif_txq = netdev_get_tx_queue(ndev, chn);
- netdev_tx_completed_queue(netif_txq, num_tx, total_bytes);
-
- if (netif_tx_queue_stopped(netif_txq)) {
- /* If the TX queue was stopped, wake it now
- * if we have enough room.
- */
- __netif_tx_lock(netif_txq, smp_processor_id());
- if (netif_running(ndev) &&
- (k3_cppi_desc_pool_avail(tx_chn->desc_pool) >=
- MAX_SKB_FRAGS))
- netif_tx_wake_queue(netif_txq);
- __netif_tx_unlock(netif_txq);
- }
-
- return num_tx;
-}
-
-static int emac_napi_tx_poll(struct napi_struct *napi_tx, int budget)
-{
- struct prueth_tx_chn *tx_chn = prueth_napi_to_tx_chn(napi_tx);
- struct prueth_emac *emac = tx_chn->emac;
- int num_tx_packets;
-
- num_tx_packets = emac_tx_complete_packets(emac, tx_chn->id, budget);
-
- if (num_tx_packets >= budget)
- return budget;
-
- if (napi_complete_done(napi_tx, num_tx_packets))
- enable_irq(tx_chn->irq);
-
- return num_tx_packets;
-}
-
-static irqreturn_t prueth_tx_irq(int irq, void *dev_id)
-{
- struct prueth_tx_chn *tx_chn = dev_id;
-
- disable_irq_nosync(irq);
- napi_schedule(&tx_chn->napi_tx);
-
- return IRQ_HANDLED;
-}
-
-static int prueth_ndev_add_tx_napi(struct prueth_emac *emac)
-{
- struct prueth *prueth = emac->prueth;
- int i, ret;
-
- for (i = 0; i < emac->tx_ch_num; i++) {
- struct prueth_tx_chn *tx_chn = &emac->tx_chns[i];
-
- netif_napi_add_tx(emac->ndev, &tx_chn->napi_tx, emac_napi_tx_poll);
- ret = request_irq(tx_chn->irq, prueth_tx_irq,
- IRQF_TRIGGER_HIGH, tx_chn->name,
- tx_chn);
- if (ret) {
- netif_napi_del(&tx_chn->napi_tx);
- dev_err(prueth->dev, "unable to request TX IRQ %d\n",
- tx_chn->irq);
- goto fail;
- }
- }
-
- return 0;
-fail:
- prueth_ndev_del_tx_napi(emac, i);
- return ret;
-}
-
-static int prueth_init_tx_chns(struct prueth_emac *emac)
-{
- static const struct k3_ring_cfg ring_cfg = {
- .elm_size = K3_RINGACC_RING_ELSIZE_8,
- .mode = K3_RINGACC_RING_MODE_RING,
- .flags = 0,
- .size = PRUETH_MAX_TX_DESC,
- };
- struct k3_udma_glue_tx_channel_cfg tx_cfg;
- struct device *dev = emac->prueth->dev;
- struct net_device *ndev = emac->ndev;
- int ret, slice, i;
- u32 hdesc_size;
-
- slice = prueth_emac_slice(emac);
- if (slice < 0)
- return slice;
-
- init_completion(&emac->tdown_complete);
-
- hdesc_size = cppi5_hdesc_calc_size(true, PRUETH_NAV_PS_DATA_SIZE,
- PRUETH_NAV_SW_DATA_SIZE);
- memset(&tx_cfg, 0, sizeof(tx_cfg));
- tx_cfg.swdata_size = PRUETH_NAV_SW_DATA_SIZE;
- tx_cfg.tx_cfg = ring_cfg;
- tx_cfg.txcq_cfg = ring_cfg;
-
- for (i = 0; i < emac->tx_ch_num; i++) {
- struct prueth_tx_chn *tx_chn = &emac->tx_chns[i];
-
- /* To differentiate channels for SLICE0 vs SLICE1 */
- snprintf(tx_chn->name, sizeof(tx_chn->name),
- "tx%d-%d", slice, i);
-
- tx_chn->emac = emac;
- tx_chn->id = i;
- tx_chn->descs_num = PRUETH_MAX_TX_DESC;
-
- tx_chn->tx_chn =
- k3_udma_glue_request_tx_chn(dev, tx_chn->name,
- &tx_cfg);
- if (IS_ERR(tx_chn->tx_chn)) {
- ret = PTR_ERR(tx_chn->tx_chn);
- tx_chn->tx_chn = NULL;
- netdev_err(ndev,
- "Failed to request tx dma ch: %d\n", ret);
- goto fail;
- }
-
- tx_chn->dma_dev = k3_udma_glue_tx_get_dma_device(tx_chn->tx_chn);
- tx_chn->desc_pool =
- k3_cppi_desc_pool_create_name(tx_chn->dma_dev,
- tx_chn->descs_num,
- hdesc_size,
- tx_chn->name);
- if (IS_ERR(tx_chn->desc_pool)) {
- ret = PTR_ERR(tx_chn->desc_pool);
- tx_chn->desc_pool = NULL;
- netdev_err(ndev, "Failed to create tx pool: %d\n", ret);
- goto fail;
- }
-
- ret = k3_udma_glue_tx_get_irq(tx_chn->tx_chn);
- if (ret < 0) {
- netdev_err(ndev, "failed to get tx irq\n");
- goto fail;
- }
- tx_chn->irq = ret;
-
- snprintf(tx_chn->name, sizeof(tx_chn->name), "%s-tx%d",
- dev_name(dev), tx_chn->id);
- }
-
- return 0;
-
-fail:
- prueth_cleanup_tx_chns(emac);
- return ret;
-}
-
-static int prueth_init_rx_chns(struct prueth_emac *emac,
- struct prueth_rx_chn *rx_chn,
- char *name, u32 max_rflows,
- u32 max_desc_num)
-{
- struct k3_udma_glue_rx_channel_cfg rx_cfg;
- struct device *dev = emac->prueth->dev;
- struct net_device *ndev = emac->ndev;
- u32 fdqring_id, hdesc_size;
- int i, ret = 0, slice;
-
- slice = prueth_emac_slice(emac);
- if (slice < 0)
- return slice;
-
- /* To differentiate channels for SLICE0 vs SLICE1 */
- snprintf(rx_chn->name, sizeof(rx_chn->name), "%s%d", name, slice);
-
- hdesc_size = cppi5_hdesc_calc_size(true, PRUETH_NAV_PS_DATA_SIZE,
- PRUETH_NAV_SW_DATA_SIZE);
- memset(&rx_cfg, 0, sizeof(rx_cfg));
- rx_cfg.swdata_size = PRUETH_NAV_SW_DATA_SIZE;
- rx_cfg.flow_id_num = max_rflows;
- rx_cfg.flow_id_base = -1; /* udmax will auto select flow id base */
-
- /* init all flows */
- rx_chn->dev = dev;
- rx_chn->descs_num = max_desc_num;
-
- rx_chn->rx_chn = k3_udma_glue_request_rx_chn(dev, rx_chn->name,
- &rx_cfg);
- if (IS_ERR(rx_chn->rx_chn)) {
- ret = PTR_ERR(rx_chn->rx_chn);
- rx_chn->rx_chn = NULL;
- netdev_err(ndev, "Failed to request rx dma ch: %d\n", ret);
- goto fail;
- }
-
- rx_chn->dma_dev = k3_udma_glue_rx_get_dma_device(rx_chn->rx_chn);
- rx_chn->desc_pool = k3_cppi_desc_pool_create_name(rx_chn->dma_dev,
- rx_chn->descs_num,
- hdesc_size,
- rx_chn->name);
- if (IS_ERR(rx_chn->desc_pool)) {
- ret = PTR_ERR(rx_chn->desc_pool);
- rx_chn->desc_pool = NULL;
- netdev_err(ndev, "Failed to create rx pool: %d\n", ret);
- goto fail;
- }
-
- emac->rx_flow_id_base = k3_udma_glue_rx_get_flow_id_base(rx_chn->rx_chn);
- netdev_dbg(ndev, "flow id base = %d\n", emac->rx_flow_id_base);
-
- fdqring_id = K3_RINGACC_RING_ID_ANY;
- for (i = 0; i < rx_cfg.flow_id_num; i++) {
- struct k3_ring_cfg rxring_cfg = {
- .elm_size = K3_RINGACC_RING_ELSIZE_8,
- .mode = K3_RINGACC_RING_MODE_RING,
- .flags = 0,
- };
- struct k3_ring_cfg fdqring_cfg = {
- .elm_size = K3_RINGACC_RING_ELSIZE_8,
- .flags = K3_RINGACC_RING_SHARED,
- };
- struct k3_udma_glue_rx_flow_cfg rx_flow_cfg = {
- .rx_cfg = rxring_cfg,
- .rxfdq_cfg = fdqring_cfg,
- .ring_rxq_id = K3_RINGACC_RING_ID_ANY,
- .src_tag_lo_sel =
- K3_UDMA_GLUE_SRC_TAG_LO_USE_REMOTE_SRC_TAG,
- };
-
- rx_flow_cfg.ring_rxfdq0_id = fdqring_id;
- rx_flow_cfg.rx_cfg.size = max_desc_num;
- rx_flow_cfg.rxfdq_cfg.size = max_desc_num;
- rx_flow_cfg.rxfdq_cfg.mode = emac->prueth->pdata.fdqring_mode;
-
- ret = k3_udma_glue_rx_flow_init(rx_chn->rx_chn,
- i, &rx_flow_cfg);
- if (ret) {
- netdev_err(ndev, "Failed to init rx flow%d %d\n",
- i, ret);
- goto fail;
- }
- if (!i)
- fdqring_id = k3_udma_glue_rx_flow_get_fdq_id(rx_chn->rx_chn,
- i);
- rx_chn->irq[i] = k3_udma_glue_rx_get_irq(rx_chn->rx_chn, i);
- if (rx_chn->irq[i] <= 0) {
- ret = rx_chn->irq[i];
- netdev_err(ndev, "Failed to get rx dma irq");
- goto fail;
- }
- }
-
- return 0;
-
-fail:
- prueth_cleanup_rx_chns(emac, rx_chn, max_rflows);
- return ret;
-}
-
-static int prueth_dma_rx_push(struct prueth_emac *emac,
- struct sk_buff *skb,
- struct prueth_rx_chn *rx_chn)
-{
- struct net_device *ndev = emac->ndev;
- struct cppi5_host_desc_t *desc_rx;
- u32 pkt_len = skb_tailroom(skb);
- dma_addr_t desc_dma;
- dma_addr_t buf_dma;
- void **swdata;
-
- desc_rx = k3_cppi_desc_pool_alloc(rx_chn->desc_pool);
- if (!desc_rx) {
- netdev_err(ndev, "rx push: failed to allocate descriptor\n");
- return -ENOMEM;
- }
- desc_dma = k3_cppi_desc_pool_virt2dma(rx_chn->desc_pool, desc_rx);
-
- buf_dma = dma_map_single(rx_chn->dma_dev, skb->data, pkt_len, DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(rx_chn->dma_dev, buf_dma))) {
- k3_cppi_desc_pool_free(rx_chn->desc_pool, desc_rx);
- netdev_err(ndev, "rx push: failed to map rx pkt buffer\n");
- return -EINVAL;
- }
-
- cppi5_hdesc_init(desc_rx, CPPI5_INFO0_HDESC_EPIB_PRESENT,
- PRUETH_NAV_PS_DATA_SIZE);
- k3_udma_glue_rx_dma_to_cppi5_addr(rx_chn->rx_chn, &buf_dma);
- cppi5_hdesc_attach_buf(desc_rx, buf_dma, skb_tailroom(skb), buf_dma, skb_tailroom(skb));
-
- swdata = cppi5_hdesc_get_swdata(desc_rx);
- *swdata = skb;
-
- return k3_udma_glue_push_rx_chn(rx_chn->rx_chn, 0,
- desc_rx, desc_dma);
-}
-
-static u64 icssg_ts_to_ns(u32 hi_sw, u32 hi, u32 lo, u32 cycle_time_ns)
-{
- u32 iepcount_lo, iepcount_hi, hi_rollover_count;
- u64 ns;
-
- iepcount_lo = lo & GENMASK(19, 0);
- iepcount_hi = (hi & GENMASK(11, 0)) << 12 | lo >> 20;
- hi_rollover_count = hi >> 11;
-
- ns = ((u64)hi_rollover_count) << 23 | (iepcount_hi + hi_sw);
- ns = ns * cycle_time_ns + iepcount_lo;
-
- return ns;
-}
-
-static void emac_rx_timestamp(struct prueth_emac *emac,
- struct sk_buff *skb, u32 *psdata)
-{
- struct skb_shared_hwtstamps *ssh;
- u64 ns;
-
- u32 hi_sw = readl(emac->prueth->shram.va +
- TIMESYNC_FW_WC_COUNT_HI_SW_OFFSET_OFFSET);
- ns = icssg_ts_to_ns(hi_sw, psdata[1], psdata[0],
- IEP_DEFAULT_CYCLE_TIME_NS);
-
- ssh = skb_hwtstamps(skb);
- memset(ssh, 0, sizeof(*ssh));
- ssh->hwtstamp = ns_to_ktime(ns);
-}
-
-static int emac_rx_packet(struct prueth_emac *emac, u32 flow_id)
-{
- struct prueth_rx_chn *rx_chn = &emac->rx_chns;
- u32 buf_dma_len, pkt_len, port_id = 0;
- struct net_device *ndev = emac->ndev;
- struct cppi5_host_desc_t *desc_rx;
- struct sk_buff *skb, *new_skb;
- dma_addr_t desc_dma, buf_dma;
- void **swdata;
- u32 *psdata;
- int ret;
-
- ret = k3_udma_glue_pop_rx_chn(rx_chn->rx_chn, flow_id, &desc_dma);
- if (ret) {
- if (ret != -ENODATA)
- netdev_err(ndev, "rx pop: failed: %d\n", ret);
- return ret;
- }
-
- if (cppi5_desc_is_tdcm(desc_dma)) /* Teardown ? */
- return 0;
-
- desc_rx = k3_cppi_desc_pool_dma2virt(rx_chn->desc_pool, desc_dma);
-
- swdata = cppi5_hdesc_get_swdata(desc_rx);
- skb = *swdata;
-
- psdata = cppi5_hdesc_get_psdata(desc_rx);
- /* RX HW timestamp */
- if (emac->rx_ts_enabled)
- emac_rx_timestamp(emac, skb, psdata);
-
- cppi5_hdesc_get_obuf(desc_rx, &buf_dma, &buf_dma_len);
- k3_udma_glue_rx_cppi5_to_dma_addr(rx_chn->rx_chn, &buf_dma);
- pkt_len = cppi5_hdesc_get_pktlen(desc_rx);
- /* firmware adds 4 CRC bytes, strip them */
- pkt_len -= 4;
- cppi5_desc_get_tags_ids(&desc_rx->hdr, &port_id, NULL);
-
- dma_unmap_single(rx_chn->dma_dev, buf_dma, buf_dma_len, DMA_FROM_DEVICE);
- k3_cppi_desc_pool_free(rx_chn->desc_pool, desc_rx);
-
- skb->dev = ndev;
- new_skb = netdev_alloc_skb_ip_align(ndev, PRUETH_MAX_PKT_SIZE);
- /* if allocation fails we drop the packet but push the
- * descriptor back to the ring with old skb to prevent a stall
- */
- if (!new_skb) {
- ndev->stats.rx_dropped++;
- new_skb = skb;
- } else {
- /* send the filled skb up the n/w stack */
- skb_put(skb, pkt_len);
- skb->protocol = eth_type_trans(skb, ndev);
- napi_gro_receive(&emac->napi_rx, skb);
- ndev->stats.rx_bytes += pkt_len;
- ndev->stats.rx_packets++;
- }
-
- /* queue another RX DMA */
- ret = prueth_dma_rx_push(emac, new_skb, &emac->rx_chns);
- if (WARN_ON(ret < 0)) {
- dev_kfree_skb_any(new_skb);
- ndev->stats.rx_errors++;
- ndev->stats.rx_dropped++;
- }
-
- return ret;
-}
-
-static void prueth_rx_cleanup(void *data, dma_addr_t desc_dma)
-{
- struct prueth_rx_chn *rx_chn = data;
- struct cppi5_host_desc_t *desc_rx;
- struct sk_buff *skb;
- dma_addr_t buf_dma;
- u32 buf_dma_len;
- void **swdata;
-
- desc_rx = k3_cppi_desc_pool_dma2virt(rx_chn->desc_pool, desc_dma);
- swdata = cppi5_hdesc_get_swdata(desc_rx);
- skb = *swdata;
- cppi5_hdesc_get_obuf(desc_rx, &buf_dma, &buf_dma_len);
- k3_udma_glue_rx_cppi5_to_dma_addr(rx_chn->rx_chn, &buf_dma);
-
- dma_unmap_single(rx_chn->dma_dev, buf_dma, buf_dma_len,
- DMA_FROM_DEVICE);
- k3_cppi_desc_pool_free(rx_chn->desc_pool, desc_rx);
-
- dev_kfree_skb_any(skb);
-}
-
static int emac_get_tx_ts(struct prueth_emac *emac,
struct emac_tx_ts_response *rsp)
{
@@ -661,208 +102,6 @@ static void tx_ts_work(struct prueth_emac *emac)
}
}
-static int prueth_tx_ts_cookie_get(struct prueth_emac *emac)
-{
- int i;
-
- /* search and get the next free slot */
- for (i = 0; i < PRUETH_MAX_TX_TS_REQUESTS; i++) {
- if (!emac->tx_ts_skb[i]) {
- emac->tx_ts_skb[i] = ERR_PTR(-EBUSY); /* reserve slot */
- return i;
- }
- }
-
- return -EBUSY;
-}
-
-/**
- * emac_ndo_start_xmit - EMAC Transmit function
- * @skb: SKB pointer
- * @ndev: EMAC network adapter
- *
- * Called by the system to transmit a packet - we queue the packet in
- * EMAC hardware transmit queue
- * Doesn't wait for completion we'll check for TX completion in
- * emac_tx_complete_packets().
- *
- * Return: enum netdev_tx
- */
-static enum netdev_tx emac_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-{
- struct cppi5_host_desc_t *first_desc, *next_desc, *cur_desc;
- struct prueth_emac *emac = netdev_priv(ndev);
- struct netdev_queue *netif_txq;
- struct prueth_tx_chn *tx_chn;
- dma_addr_t desc_dma, buf_dma;
- int i, ret = 0, q_idx;
- bool in_tx_ts = 0;
- int tx_ts_cookie;
- void **swdata;
- u32 pkt_len;
- u32 *epib;
-
- pkt_len = skb_headlen(skb);
- q_idx = skb_get_queue_mapping(skb);
-
- tx_chn = &emac->tx_chns[q_idx];
- netif_txq = netdev_get_tx_queue(ndev, q_idx);
-
- /* Map the linear buffer */
- buf_dma = dma_map_single(tx_chn->dma_dev, skb->data, pkt_len, DMA_TO_DEVICE);
- if (dma_mapping_error(tx_chn->dma_dev, buf_dma)) {
- netdev_err(ndev, "tx: failed to map skb buffer\n");
- ret = NETDEV_TX_OK;
- goto drop_free_skb;
- }
-
- first_desc = k3_cppi_desc_pool_alloc(tx_chn->desc_pool);
- if (!first_desc) {
- netdev_dbg(ndev, "tx: failed to allocate descriptor\n");
- dma_unmap_single(tx_chn->dma_dev, buf_dma, pkt_len, DMA_TO_DEVICE);
- goto drop_stop_q_busy;
- }
-
- cppi5_hdesc_init(first_desc, CPPI5_INFO0_HDESC_EPIB_PRESENT,
- PRUETH_NAV_PS_DATA_SIZE);
- cppi5_hdesc_set_pkttype(first_desc, 0);
- epib = first_desc->epib;
- epib[0] = 0;
- epib[1] = 0;
- if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
- emac->tx_ts_enabled) {
- tx_ts_cookie = prueth_tx_ts_cookie_get(emac);
- if (tx_ts_cookie >= 0) {
- skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
- /* Request TX timestamp */
- epib[0] = (u32)tx_ts_cookie;
- epib[1] = 0x80000000; /* TX TS request */
- emac->tx_ts_skb[tx_ts_cookie] = skb_get(skb);
- in_tx_ts = 1;
- }
- }
-
- /* set dst tag to indicate internal qid at the firmware which is at
- * bit8..bit15. bit0..bit7 indicates port num for directed
- * packets in case of switch mode operation
- */
- cppi5_desc_set_tags_ids(&first_desc->hdr, 0, (emac->port_id | (q_idx << 8)));
- k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
- cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
- swdata = cppi5_hdesc_get_swdata(first_desc);
- *swdata = skb;
-
- /* Handle the case where skb is fragmented in pages */
- cur_desc = first_desc;
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- u32 frag_size = skb_frag_size(frag);
-
- next_desc = k3_cppi_desc_pool_alloc(tx_chn->desc_pool);
- if (!next_desc) {
- netdev_err(ndev,
- "tx: failed to allocate frag. descriptor\n");
- goto free_desc_stop_q_busy_cleanup_tx_ts;
- }
-
- buf_dma = skb_frag_dma_map(tx_chn->dma_dev, frag, 0, frag_size,
- DMA_TO_DEVICE);
- if (dma_mapping_error(tx_chn->dma_dev, buf_dma)) {
- netdev_err(ndev, "tx: Failed to map skb page\n");
- k3_cppi_desc_pool_free(tx_chn->desc_pool, next_desc);
- ret = NETDEV_TX_OK;
- goto cleanup_tx_ts;
- }
-
- cppi5_hdesc_reset_hbdesc(next_desc);
- k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
- cppi5_hdesc_attach_buf(next_desc,
- buf_dma, frag_size, buf_dma, frag_size);
-
- desc_dma = k3_cppi_desc_pool_virt2dma(tx_chn->desc_pool,
- next_desc);
- k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &desc_dma);
- cppi5_hdesc_link_hbdesc(cur_desc, desc_dma);
-
- pkt_len += frag_size;
- cur_desc = next_desc;
- }
- WARN_ON_ONCE(pkt_len != skb->len);
-
- /* report bql before sending packet */
- netdev_tx_sent_queue(netif_txq, pkt_len);
-
- cppi5_hdesc_set_pktlen(first_desc, pkt_len);
- desc_dma = k3_cppi_desc_pool_virt2dma(tx_chn->desc_pool, first_desc);
- /* cppi5_desc_dump(first_desc, 64); */
-
- skb_tx_timestamp(skb); /* SW timestamp if SKBTX_IN_PROGRESS not set */
- ret = k3_udma_glue_push_tx_chn(tx_chn->tx_chn, first_desc, desc_dma);
- if (ret) {
- netdev_err(ndev, "tx: push failed: %d\n", ret);
- goto drop_free_descs;
- }
-
- if (in_tx_ts)
- atomic_inc(&emac->tx_ts_pending);
-
- if (k3_cppi_desc_pool_avail(tx_chn->desc_pool) < MAX_SKB_FRAGS) {
- netif_tx_stop_queue(netif_txq);
- /* Barrier, so that stop_queue visible to other cpus */
- smp_mb__after_atomic();
-
- if (k3_cppi_desc_pool_avail(tx_chn->desc_pool) >=
- MAX_SKB_FRAGS)
- netif_tx_wake_queue(netif_txq);
- }
-
- return NETDEV_TX_OK;
-
-cleanup_tx_ts:
- if (in_tx_ts) {
- dev_kfree_skb_any(emac->tx_ts_skb[tx_ts_cookie]);
- emac->tx_ts_skb[tx_ts_cookie] = NULL;
- }
-
-drop_free_descs:
- prueth_xmit_free(tx_chn, first_desc);
-
-drop_free_skb:
- dev_kfree_skb_any(skb);
-
- /* error */
- ndev->stats.tx_dropped++;
- netdev_err(ndev, "tx: error: %d\n", ret);
-
- return ret;
-
-free_desc_stop_q_busy_cleanup_tx_ts:
- if (in_tx_ts) {
- dev_kfree_skb_any(emac->tx_ts_skb[tx_ts_cookie]);
- emac->tx_ts_skb[tx_ts_cookie] = NULL;
- }
- prueth_xmit_free(tx_chn, first_desc);
-
-drop_stop_q_busy:
- netif_tx_stop_queue(netif_txq);
- return NETDEV_TX_BUSY;
-}
-
-static void prueth_tx_cleanup(void *data, dma_addr_t desc_dma)
-{
- struct prueth_tx_chn *tx_chn = data;
- struct cppi5_host_desc_t *desc_tx;
- struct sk_buff *skb;
- void **swdata;
-
- desc_tx = k3_cppi_desc_pool_dma2virt(tx_chn->desc_pool, desc_dma);
- swdata = cppi5_hdesc_get_swdata(desc_tx);
- skb = *(swdata);
- prueth_xmit_free(tx_chn, desc_tx);
-
- dev_kfree_skb_any(skb);
-}
-
static irqreturn_t prueth_tx_ts_irq(int irq, void *dev_id)
{
struct prueth_emac *emac = dev_id;
@@ -873,22 +112,6 @@ static irqreturn_t prueth_tx_ts_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static irqreturn_t prueth_rx_irq(int irq, void *dev_id)
-{
- struct prueth_emac *emac = dev_id;
-
- disable_irq_nosync(irq);
- napi_schedule(&emac->napi_rx);
-
- return IRQ_HANDLED;
-}
-
-struct icssg_firmwares {
- char *pru;
- char *rtu;
- char *txpru;
-};
-
static struct icssg_firmwares icssg_emac_firmwares[] = {
{
.pru = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
@@ -953,41 +176,6 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
return ret;
}
-static void prueth_emac_stop(struct prueth_emac *emac)
-{
- struct prueth *prueth = emac->prueth;
- int slice;
-
- switch (emac->port_id) {
- case PRUETH_PORT_MII0:
- slice = ICSS_SLICE0;
- break;
- case PRUETH_PORT_MII1:
- slice = ICSS_SLICE1;
- break;
- default:
- netdev_err(emac->ndev, "invalid port\n");
- return;
- }
-
- emac->fw_running = 0;
- rproc_shutdown(prueth->txpru[slice]);
- rproc_shutdown(prueth->rtu[slice]);
- rproc_shutdown(prueth->pru[slice]);
-}
-
-static void prueth_cleanup_tx_ts(struct prueth_emac *emac)
-{
- int i;
-
- for (i = 0; i < PRUETH_MAX_TX_TS_REQUESTS; i++) {
- if (emac->tx_ts_skb[i]) {
- dev_kfree_skb_any(emac->tx_ts_skb[i]);
- emac->tx_ts_skb[i] = NULL;
- }
- }
-}
-
/* called back by PHY layer if there is change in link state of hw port*/
static void emac_adjust_link(struct net_device *ndev)
{
@@ -1055,86 +243,6 @@ static void emac_adjust_link(struct net_device *ndev)
}
}
-static int emac_napi_rx_poll(struct napi_struct *napi_rx, int budget)
-{
- struct prueth_emac *emac = prueth_napi_to_emac(napi_rx);
- int rx_flow = PRUETH_RX_FLOW_DATA;
- int flow = PRUETH_MAX_RX_FLOWS;
- int num_rx = 0;
- int cur_budget;
- int ret;
-
- while (flow--) {
- cur_budget = budget - num_rx;
-
- while (cur_budget--) {
- ret = emac_rx_packet(emac, flow);
- if (ret)
- break;
- num_rx++;
- }
-
- if (num_rx >= budget)
- break;
- }
-
- if (num_rx < budget && napi_complete_done(napi_rx, num_rx))
- enable_irq(emac->rx_chns.irq[rx_flow]);
-
- return num_rx;
-}
-
-static int prueth_prepare_rx_chan(struct prueth_emac *emac,
- struct prueth_rx_chn *chn,
- int buf_size)
-{
- struct sk_buff *skb;
- int i, ret;
-
- for (i = 0; i < chn->descs_num; i++) {
- skb = __netdev_alloc_skb_ip_align(NULL, buf_size, GFP_KERNEL);
- if (!skb)
- return -ENOMEM;
-
- ret = prueth_dma_rx_push(emac, skb, chn);
- if (ret < 0) {
- netdev_err(emac->ndev,
- "cannot submit skb for rx chan %s ret %d\n",
- chn->name, ret);
- kfree_skb(skb);
- return ret;
- }
- }
-
- return 0;
-}
-
-static void prueth_reset_tx_chan(struct prueth_emac *emac, int ch_num,
- bool free_skb)
-{
- int i;
-
- for (i = 0; i < ch_num; i++) {
- if (free_skb)
- k3_udma_glue_reset_tx_chn(emac->tx_chns[i].tx_chn,
- &emac->tx_chns[i],
- prueth_tx_cleanup);
- k3_udma_glue_disable_tx_chn(emac->tx_chns[i].tx_chn);
- }
-}
-
-static void prueth_reset_rx_chan(struct prueth_rx_chn *chn,
- int num_flows, bool disable)
-{
- int i;
-
- for (i = 0; i < num_flows; i++)
- k3_udma_glue_reset_rx_chn(chn->rx_chn, i, chn,
- prueth_rx_cleanup, !!i);
- if (disable)
- k3_udma_glue_disable_rx_chn(chn->rx_chn);
-}
-
static int emac_phy_connect(struct prueth_emac *emac)
{
struct prueth *prueth = emac->prueth;
@@ -1508,11 +616,6 @@ static int emac_ndo_stop(struct net_device *ndev)
return 0;
}
-static void emac_ndo_tx_timeout(struct net_device *ndev, unsigned int txqueue)
-{
- ndev->stats.tx_errors++;
-}
-
static void emac_ndo_set_rx_mode_work(struct work_struct *work)
{
struct prueth_emac *emac = container_of(work, struct prueth_emac, rx_mode_work);
@@ -1558,116 +661,6 @@ static void emac_ndo_set_rx_mode(struct net_device *ndev)
queue_work(emac->cmd_wq, &emac->rx_mode_work);
}
-static int emac_set_ts_config(struct net_device *ndev, struct ifreq *ifr)
-{
- struct prueth_emac *emac = netdev_priv(ndev);
- struct hwtstamp_config config;
-
- if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
- return -EFAULT;
-
- switch (config.tx_type) {
- case HWTSTAMP_TX_OFF:
- emac->tx_ts_enabled = 0;
- break;
- case HWTSTAMP_TX_ON:
- emac->tx_ts_enabled = 1;
- break;
- default:
- return -ERANGE;
- }
-
- switch (config.rx_filter) {
- case HWTSTAMP_FILTER_NONE:
- emac->rx_ts_enabled = 0;
- break;
- case HWTSTAMP_FILTER_ALL:
- case HWTSTAMP_FILTER_SOME:
- case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
- case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
- case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
- case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
- case HWTSTAMP_FILTER_PTP_V2_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
- case HWTSTAMP_FILTER_NTP_ALL:
- emac->rx_ts_enabled = 1;
- config.rx_filter = HWTSTAMP_FILTER_ALL;
- break;
- default:
- return -ERANGE;
- }
-
- return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
- -EFAULT : 0;
-}
-
-static int emac_get_ts_config(struct net_device *ndev, struct ifreq *ifr)
-{
- struct prueth_emac *emac = netdev_priv(ndev);
- struct hwtstamp_config config;
-
- config.flags = 0;
- config.tx_type = emac->tx_ts_enabled ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
- config.rx_filter = emac->rx_ts_enabled ? HWTSTAMP_FILTER_ALL : HWTSTAMP_FILTER_NONE;
-
- return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
- -EFAULT : 0;
-}
-
-static int emac_ndo_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
-{
- switch (cmd) {
- case SIOCGHWTSTAMP:
- return emac_get_ts_config(ndev, ifr);
- case SIOCSHWTSTAMP:
- return emac_set_ts_config(ndev, ifr);
- default:
- break;
- }
-
- return phy_do_ioctl(ndev, ifr, cmd);
-}
-
-static void emac_ndo_get_stats64(struct net_device *ndev,
- struct rtnl_link_stats64 *stats)
-{
- struct prueth_emac *emac = netdev_priv(ndev);
-
- emac_update_hardware_stats(emac);
-
- stats->rx_packets = emac_get_stat_by_name(emac, "rx_packets");
- stats->rx_bytes = emac_get_stat_by_name(emac, "rx_bytes");
- stats->tx_packets = emac_get_stat_by_name(emac, "tx_packets");
- stats->tx_bytes = emac_get_stat_by_name(emac, "tx_bytes");
- stats->rx_crc_errors = emac_get_stat_by_name(emac, "rx_crc_errors");
- stats->rx_over_errors = emac_get_stat_by_name(emac, "rx_over_errors");
- stats->multicast = emac_get_stat_by_name(emac, "rx_multicast_frames");
-
- stats->rx_errors = ndev->stats.rx_errors;
- stats->rx_dropped = ndev->stats.rx_dropped;
- stats->tx_errors = ndev->stats.tx_errors;
- stats->tx_dropped = ndev->stats.tx_dropped;
-}
-
-static int emac_ndo_get_phys_port_name(struct net_device *ndev, char *name,
- size_t len)
-{
- struct prueth_emac *emac = netdev_priv(ndev);
- int ret;
-
- ret = snprintf(name, len, "p%d", emac->port_id);
- if (ret >= len)
- return -EINVAL;
-
- return 0;
-}
-
static const struct net_device_ops emac_netdev_ops = {
.ndo_open = emac_ndo_open,
.ndo_stop = emac_ndo_stop,
@@ -1681,42 +674,6 @@ static const struct net_device_ops emac_netdev_ops = {
.ndo_get_phys_port_name = emac_ndo_get_phys_port_name,
};
-/* get emac_port corresponding to eth_node name */
-static int prueth_node_port(struct device_node *eth_node)
-{
- u32 port_id;
- int ret;
-
- ret = of_property_read_u32(eth_node, "reg", &port_id);
- if (ret)
- return ret;
-
- if (port_id == 0)
- return PRUETH_PORT_MII0;
- else if (port_id == 1)
- return PRUETH_PORT_MII1;
- else
- return PRUETH_PORT_INVALID;
-}
-
-/* get MAC instance corresponding to eth_node name */
-static int prueth_node_mac(struct device_node *eth_node)
-{
- u32 port_id;
- int ret;
-
- ret = of_property_read_u32(eth_node, "reg", &port_id);
- if (ret)
- return ret;
-
- if (port_id == 0)
- return PRUETH_MAC0;
- else if (port_id == 1)
- return PRUETH_MAC1;
- else
- return PRUETH_MAC_INVALID;
-}
-
static int prueth_netdev_init(struct prueth *prueth,
struct device_node *eth_node)
{
@@ -1860,90 +817,6 @@ static int prueth_netdev_init(struct prueth *prueth,
return ret;
}
-static void prueth_netdev_exit(struct prueth *prueth,
- struct device_node *eth_node)
-{
- struct prueth_emac *emac;
- enum prueth_mac mac;
-
- mac = prueth_node_mac(eth_node);
- if (mac == PRUETH_MAC_INVALID)
- return;
-
- emac = prueth->emac[mac];
- if (!emac)
- return;
-
- if (of_phy_is_fixed_link(emac->phy_node))
- of_phy_deregister_fixed_link(emac->phy_node);
-
- netif_napi_del(&emac->napi_rx);
-
- pruss_release_mem_region(prueth->pruss, &emac->dram);
- destroy_workqueue(emac->cmd_wq);
- free_netdev(emac->ndev);
- prueth->emac[mac] = NULL;
-}
-
-static int prueth_get_cores(struct prueth *prueth, int slice)
-{
- struct device *dev = prueth->dev;
- enum pruss_pru_id pruss_id;
- struct device_node *np;
- int idx = -1, ret;
-
- np = dev->of_node;
-
- switch (slice) {
- case ICSS_SLICE0:
- idx = 0;
- break;
- case ICSS_SLICE1:
- idx = 3;
- break;
- default:
- return -EINVAL;
- }
-
- prueth->pru[slice] = pru_rproc_get(np, idx, &pruss_id);
- if (IS_ERR(prueth->pru[slice])) {
- ret = PTR_ERR(prueth->pru[slice]);
- prueth->pru[slice] = NULL;
- return dev_err_probe(dev, ret, "unable to get PRU%d\n", slice);
- }
- prueth->pru_id[slice] = pruss_id;
-
- idx++;
- prueth->rtu[slice] = pru_rproc_get(np, idx, NULL);
- if (IS_ERR(prueth->rtu[slice])) {
- ret = PTR_ERR(prueth->rtu[slice]);
- prueth->rtu[slice] = NULL;
- return dev_err_probe(dev, ret, "unable to get RTU%d\n", slice);
- }
-
- idx++;
- prueth->txpru[slice] = pru_rproc_get(np, idx, NULL);
- if (IS_ERR(prueth->txpru[slice])) {
- ret = PTR_ERR(prueth->txpru[slice]);
- prueth->txpru[slice] = NULL;
- return dev_err_probe(dev, ret, "unable to get TX_PRU%d\n", slice);
- }
-
- return 0;
-}
-
-static void prueth_put_cores(struct prueth *prueth, int slice)
-{
- if (prueth->txpru[slice])
- pru_rproc_put(prueth->txpru[slice]);
-
- if (prueth->rtu[slice])
- pru_rproc_put(prueth->rtu[slice]);
-
- if (prueth->pru[slice])
- pru_rproc_put(prueth->pru[slice]);
-}
-
static int prueth_probe(struct platform_device *pdev)
{
struct device_node *eth_node, *eth_ports_node;
@@ -2273,62 +1146,6 @@ static void prueth_remove(struct platform_device *pdev)
prueth_put_cores(prueth, ICSS_SLICE0);
}
-#ifdef CONFIG_PM_SLEEP
-static int prueth_suspend(struct device *dev)
-{
- struct prueth *prueth = dev_get_drvdata(dev);
- struct net_device *ndev;
- int i, ret;
-
- for (i = 0; i < PRUETH_NUM_MACS; i++) {
- ndev = prueth->registered_netdevs[i];
-
- if (!ndev)
- continue;
-
- if (netif_running(ndev)) {
- netif_device_detach(ndev);
- ret = emac_ndo_stop(ndev);
- if (ret < 0) {
- netdev_err(ndev, "failed to stop: %d", ret);
- return ret;
- }
- }
- }
-
- return 0;
-}
-
-static int prueth_resume(struct device *dev)
-{
- struct prueth *prueth = dev_get_drvdata(dev);
- struct net_device *ndev;
- int i, ret;
-
- for (i = 0; i < PRUETH_NUM_MACS; i++) {
- ndev = prueth->registered_netdevs[i];
-
- if (!ndev)
- continue;
-
- if (netif_running(ndev)) {
- ret = emac_ndo_open(ndev);
- if (ret < 0) {
- netdev_err(ndev, "failed to start: %d", ret);
- return ret;
- }
- netif_device_attach(ndev);
- }
- }
-
- return 0;
-}
-#endif /* CONFIG_PM_SLEEP */
-
-static const struct dev_pm_ops prueth_dev_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(prueth_suspend, prueth_resume)
-};
-
static const struct prueth_pdata am654_icssg_pdata = {
.fdqring_mode = K3_RINGACC_RING_MODE_MESSAGE,
.quirk_10m_link_issue = 1,
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index 8b6d6b497010..5d792e9bade0 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -55,6 +55,8 @@
#define ICSSG_NUM_STANDARD_STATS 31
#define ICSSG_NUM_ETHTOOL_STATS (ICSSG_NUM_STATS - ICSSG_NUM_STANDARD_STATS)
+#define IEP_DEFAULT_CYCLE_TIME_NS 1000000 /* 1 ms */
+
/* Firmware status codes */
#define ICSS_HS_FW_READY 0x55555555
#define ICSS_HS_FW_DEAD 0xDEAD0000 /* lower 16 bits contain error code */
@@ -188,6 +190,12 @@ struct prueth_pdata {
u32 quirk_10m_link_issue:1;
};
+struct icssg_firmwares {
+ char *pru;
+ char *rtu;
+ char *txpru;
+};
+
/**
* struct prueth - PRUeth structure
* @dev: device
@@ -257,6 +265,7 @@ static inline int prueth_emac_slice(struct prueth_emac *emac)
}
extern const struct ethtool_ops icssg_ethtool_ops;
+extern const struct dev_pm_ops prueth_dev_pm_ops;
/* Classifier helpers */
void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac);
@@ -285,4 +294,54 @@ u32 icssg_queue_level(struct prueth *prueth, int queue);
void emac_stats_work_handler(struct work_struct *work);
void emac_update_hardware_stats(struct prueth_emac *emac);
int emac_get_stat_by_name(struct prueth_emac *emac, char *stat_name);
+
+/* Common functions */
+void prueth_cleanup_rx_chns(struct prueth_emac *emac,
+ struct prueth_rx_chn *rx_chn,
+ int max_rflows);
+void prueth_cleanup_tx_chns(struct prueth_emac *emac);
+void prueth_ndev_del_tx_napi(struct prueth_emac *emac, int num);
+void prueth_xmit_free(struct prueth_tx_chn *tx_chn,
+ struct cppi5_host_desc_t *desc);
+int emac_tx_complete_packets(struct prueth_emac *emac, int chn,
+ int budget);
+int prueth_ndev_add_tx_napi(struct prueth_emac *emac);
+int prueth_init_tx_chns(struct prueth_emac *emac);
+int prueth_init_rx_chns(struct prueth_emac *emac,
+ struct prueth_rx_chn *rx_chn,
+ char *name, u32 max_rflows,
+ u32 max_desc_num);
+int prueth_dma_rx_push(struct prueth_emac *emac,
+ struct sk_buff *skb,
+ struct prueth_rx_chn *rx_chn);
+void emac_rx_timestamp(struct prueth_emac *emac,
+ struct sk_buff *skb, u32 *psdata);
+enum netdev_tx emac_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev);
+irqreturn_t prueth_rx_irq(int irq, void *dev_id);
+void prueth_emac_stop(struct prueth_emac *emac);
+void prueth_cleanup_tx_ts(struct prueth_emac *emac);
+int emac_napi_rx_poll(struct napi_struct *napi_rx, int budget);
+int prueth_prepare_rx_chan(struct prueth_emac *emac,
+ struct prueth_rx_chn *chn,
+ int buf_size);
+void prueth_reset_tx_chan(struct prueth_emac *emac, int ch_num,
+ bool free_skb);
+void prueth_reset_rx_chan(struct prueth_rx_chn *chn,
+ int num_flows, bool disable);
+void emac_ndo_tx_timeout(struct net_device *ndev, unsigned int txqueue);
+int emac_ndo_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd);
+void emac_ndo_get_stats64(struct net_device *ndev,
+ struct rtnl_link_stats64 *stats);
+int emac_ndo_get_phys_port_name(struct net_device *ndev, char *name,
+ size_t len);
+int prueth_node_port(struct device_node *eth_node);
+int prueth_node_mac(struct device_node *eth_node);
+void prueth_netdev_exit(struct prueth *prueth,
+ struct device_node *eth_node);
+int prueth_get_cores(struct prueth *prueth, int slice);
+void prueth_put_cores(struct prueth *prueth, int slice);
+
+/* Revision specific helper */
+u64 icssg_ts_to_ns(u32 hi_sw, u32 hi, u32 lo, u32 cycle_time_ns);
+
#endif /* __NET_TI_ICSSG_PRUETH_H */
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH net-next v4 04/10] net: ti: icssg-prueth: Add SR1.0-specific configuration bits
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
` (2 preceding siblings ...)
2024-03-05 11:40 ` [PATCH net-next v4 03/10] net: ti: icssg-prueth: Move common functions into a separate file Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-07 12:48 ` Roger Quadros
2024-03-05 11:40 ` [PATCH net-next v4 05/10] net: ti: icssg-prueth: Add SR1.0-specific description bits Diogo Ivo
` (6 subsequent siblings)
10 siblings, 1 reply; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: danishanwar, rogerq, davem, edumazet, kuba, pabeni, andrew,
linux-arm-kernel, netdev
Cc: Diogo Ivo, jan.kiszka
Define the firmware configuration structure and commands needed to
communicate with SR1.0 firmware, as well as SR1.0 buffer information
where it differs from SR2.0.
Based on the work of Roger Quadros, Murali Karicheri and
Grygorii Strashko in TI's 5.10 SDK [1].
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
---
Changes in v4:
- Added _SR1 suffix to all SR1 defines
- Grouped SR1.0 specific data together
Changes in v2:
- Removed explicit references to SR2.0
drivers/net/ethernet/ti/icssg/icssg_config.h | 56 ++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
index 43eb0922172a..cf2ea4bd22a2 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
@@ -109,6 +109,62 @@ enum icssg_port_state_cmd {
#define ICSSG_FLAG_MASK 0xff00ffff
+/* SR1.0-specific bits */
+#define PRUETH_MAX_RX_FLOWS_SR1 4 /* excluding default flow */
+#define PRUETH_RX_FLOW_DATA_SR1 3 /* highest priority flow */
+#define PRUETH_MAX_RX_MGM_DESC_SR1 8
+#define PRUETH_MAX_RX_MGM_FLOWS_SR1 2 /* excluding default flow */
+#define PRUETH_RX_MGM_FLOW_RESPONSE_SR1 0
+#define PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1 1
+
+#define PRUETH_NUM_BUF_POOLS_SR1 16
+#define PRUETH_EMAC_BUF_POOL_START_SR1 8
+#define PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1 128
+#define PRUETH_EMAC_BUF_SIZE_SR1 1536
+#define PRUETH_EMAC_NUM_BUF_SR1 4
+#define PRUETH_EMAC_BUF_POOL_SIZE_SR1 (PRUETH_EMAC_NUM_BUF_SR1 * \
+ PRUETH_EMAC_BUF_SIZE_SR1)
+#define MSMC_RAM_SIZE_SR1 (SZ_64K + SZ_32K + SZ_2K) /* 0x1880 x 8 x 2 */
+
+struct icssg_sr1_config {
+ __le32 status; /* Firmware status */
+ __le32 addr_lo; /* MSMC Buffer pool base address low. */
+ __le32 addr_hi; /* MSMC Buffer pool base address high. Must be 0 */
+ __le32 tx_buf_sz[16]; /* Array of buffer pool sizes */
+ __le32 num_tx_threads; /* Number of active egress threads, 1 to 4 */
+ __le32 tx_rate_lim_en; /* Bitmask: Egress rate limit en per thread */
+ __le32 rx_flow_id; /* RX flow id for first rx ring */
+ __le32 rx_mgr_flow_id; /* RX flow id for the first management ring */
+ __le32 flags; /* TBD */
+ __le32 n_burst; /* for debug */
+ __le32 rtu_status; /* RTU status */
+ __le32 info; /* reserved */
+ __le32 reserve;
+ __le32 rand_seed; /* Used for the random number generation at fw */
+} __packed;
+
+/* SR1.0 shutdown command to stop processing at firmware.
+ * Command format: 0x8101ss00, where
+ * - ss: sequence number. Currently not used by driver.
+ */
+#define ICSSG_SHUTDOWN_CMD_SR1 0x81010000
+
+/* SR1.0 pstate speed/duplex command to set speed and duplex settings
+ * in firmware.
+ * Command format: 0x8102ssPN, where
+ * - ss: sequence number. Currently not used by driver.
+ * - P: port number (for switch mode).
+ * - N: Speed/Duplex state:
+ * 0x0 - 10Mbps/Half duplex;
+ * 0x8 - 10Mbps/Full duplex;
+ * 0x2 - 100Mbps/Half duplex;
+ * 0xa - 100Mbps/Full duplex;
+ * 0xc - 1Gbps/Full duplex;
+ * NOTE: The above are the same value as bits [3..1](slice 0)
+ * or bits [7..5](slice 1) of RGMII CFG register.
+ */
+#define ICSSG_PSTATE_SPEED_DUPLEX_CMD_SR1 0x81020000
+
struct icssg_setclock_desc {
u8 request;
u8 restore;
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH net-next v4 04/10] net: ti: icssg-prueth: Add SR1.0-specific configuration bits
2024-03-05 11:40 ` [PATCH net-next v4 04/10] net: ti: icssg-prueth: Add SR1.0-specific configuration bits Diogo Ivo
@ 2024-03-07 12:48 ` Roger Quadros
0 siblings, 0 replies; 17+ messages in thread
From: Roger Quadros @ 2024-03-07 12:48 UTC (permalink / raw)
To: Diogo Ivo, danishanwar, davem, edumazet, kuba, pabeni, andrew,
linux-arm-kernel, netdev
Cc: jan.kiszka
On 05/03/2024 13:40, Diogo Ivo wrote:
> Define the firmware configuration structure and commands needed to
> communicate with SR1.0 firmware, as well as SR1.0 buffer information
> where it differs from SR2.0.
>
> Based on the work of Roger Quadros, Murali Karicheri and
> Grygorii Strashko in TI's 5.10 SDK [1].
>
> [1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
>
> Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
--
cheers,
-roger
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH net-next v4 05/10] net: ti: icssg-prueth: Add SR1.0-specific description bits
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
` (3 preceding siblings ...)
2024-03-05 11:40 ` [PATCH net-next v4 04/10] net: ti: icssg-prueth: Add SR1.0-specific configuration bits Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-05 14:41 ` Russell King (Oracle)
2024-03-05 11:40 ` [PATCH net-next v4 06/10] net: ti: icssg-prueth: Adjust IPG configuration for SR1.0 Diogo Ivo
` (5 subsequent siblings)
10 siblings, 1 reply; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: danishanwar, rogerq, davem, edumazet, kuba, pabeni, andrew,
linux-arm-kernel, netdev
Cc: Diogo Ivo, jan.kiszka
Add a field to distinguish between SR1.0 and SR2.0 in the driver
as well as the necessary structures to program SR1.0.
Based on the work of Roger Quadros in TI's 5.10 SDK [1].
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
---
Changes in v4:
- Change cmd_data type to __le32 to eliminate sparse warnings
- Add Reviewed-by from Roger (assuming the above change does not
invalidate it)
drivers/net/ethernet/ti/icssg/icssg_prueth.h | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index 5d792e9bade0..c5632a2388a1 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -129,6 +129,7 @@ struct prueth_rx_chn {
/* data for each emac port */
struct prueth_emac {
+ bool is_sr1;
bool fw_running;
struct prueth *prueth;
struct net_device *ndev;
@@ -157,6 +158,10 @@ struct prueth_emac {
int rx_flow_id_base;
int tx_ch_num;
+ /* SR1.0 Management channel */
+ struct prueth_rx_chn rx_mgm_chn;
+ int rx_mgm_flow_id_base;
+
spinlock_t lock; /* serialize access */
/* TX HW Timestamping */
@@ -167,7 +172,7 @@ struct prueth_emac {
u8 cmd_seq;
/* shutdown related */
- u32 cmd_data[4];
+ __le32 cmd_data[4];
struct completion cmd_complete;
/* Mutex to serialize access to firmware command interface */
struct mutex cmd_lock;
@@ -251,6 +256,13 @@ struct emac_tx_ts_response {
u32 hi_ts;
};
+struct emac_tx_ts_response_sr1 {
+ u32 lo_ts;
+ u32 hi_ts;
+ u32 reserved;
+ u32 cookie;
+};
+
/* get PRUSS SLICE number from prueth_emac */
static inline int prueth_emac_slice(struct prueth_emac *emac)
{
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH net-next v4 05/10] net: ti: icssg-prueth: Add SR1.0-specific description bits
2024-03-05 11:40 ` [PATCH net-next v4 05/10] net: ti: icssg-prueth: Add SR1.0-specific description bits Diogo Ivo
@ 2024-03-05 14:41 ` Russell King (Oracle)
2024-03-06 11:26 ` Diogo Ivo
0 siblings, 1 reply; 17+ messages in thread
From: Russell King (Oracle) @ 2024-03-05 14:41 UTC (permalink / raw)
To: Diogo Ivo
Cc: danishanwar, rogerq, davem, edumazet, kuba, pabeni, andrew,
linux-arm-kernel, netdev, jan.kiszka
On Tue, Mar 05, 2024 at 11:40:25AM +0000, Diogo Ivo wrote:
> +struct emac_tx_ts_response_sr1 {
> + u32 lo_ts;
> + u32 hi_ts;
> + u32 reserved;
> + u32 cookie;
> +};
In patch 10, this comes from skb->data, so seems to be a packet. Is the
data dependent on the host endian, or is it always little endian?
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH net-next v4 05/10] net: ti: icssg-prueth: Add SR1.0-specific description bits
2024-03-05 14:41 ` Russell King (Oracle)
@ 2024-03-06 11:26 ` Diogo Ivo
0 siblings, 0 replies; 17+ messages in thread
From: Diogo Ivo @ 2024-03-06 11:26 UTC (permalink / raw)
To: Russell King (Oracle)
Cc: danishanwar, rogerq, davem, edumazet, kuba, pabeni, andrew,
linux-arm-kernel, netdev, jan.kiszka
On 3/5/24 14:41, Russell King (Oracle) wrote:
> On Tue, Mar 05, 2024 at 11:40:25AM +0000, Diogo Ivo wrote:
>> +struct emac_tx_ts_response_sr1 {
>> + u32 lo_ts;
>> + u32 hi_ts;
>> + u32 reserved;
>> + u32 cookie;
>> +};
>
> In patch 10, this comes from skb->data, so seems to be a packet. Is the
> data dependent on the host endian, or is it always little endian?
Since prueth_rx_mgm_rsp_thread() in patch 10 calls le32_to_cpu() on the data
it gets from skb->data it seems likely that here the data is also __le32 and
these calls should also be added so that we can use u32 data types. I will
add these calls for next version unless there is some insight here that I am
missing.
Best regards,
Diogo
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH net-next v4 06/10] net: ti: icssg-prueth: Adjust IPG configuration for SR1.0
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
` (4 preceding siblings ...)
2024-03-05 11:40 ` [PATCH net-next v4 05/10] net: ti: icssg-prueth: Add SR1.0-specific description bits Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-05 11:40 ` [PATCH net-next v4 07/10] net: ti: icssg-prueth: Adjust the number of TX channels " Diogo Ivo
` (4 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: danishanwar, rogerq, davem, edumazet, kuba, pabeni, andrew,
linux-arm-kernel, netdev
Cc: Diogo Ivo, jan.kiszka
Correctly adjust the IPG based on the Silicon Revision.
Based on the work of Roger Quadros, Vignesh Raghavendra
and Grygorii Strashko in TI's 5.10 SDK [1].
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
---
Changes in v4:
- Add Reviewed-by from Roger
drivers/net/ethernet/ti/icssg/icssg_config.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
index 99de8a40ed60..15f2235bf90f 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
@@ -20,6 +20,8 @@
/* IPG is in core_clk cycles */
#define MII_RT_TX_IPG_100M 0x17
#define MII_RT_TX_IPG_1G 0xb
+#define MII_RT_TX_IPG_100M_SR1 0x166
+#define MII_RT_TX_IPG_1G_SR1 0x1a
#define ICSSG_QUEUES_MAX 64
#define ICSSG_QUEUE_OFFSET 0xd00
@@ -202,23 +204,29 @@ void icssg_config_ipg(struct prueth_emac *emac)
{
struct prueth *prueth = emac->prueth;
int slice = prueth_emac_slice(emac);
+ u32 ipg;
switch (emac->speed) {
case SPEED_1000:
- icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_1G);
+ ipg = emac->is_sr1 ? MII_RT_TX_IPG_1G_SR1 : MII_RT_TX_IPG_1G;
break;
case SPEED_100:
- icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
+ ipg = emac->is_sr1 ? MII_RT_TX_IPG_100M_SR1 : MII_RT_TX_IPG_100M;
break;
case SPEED_10:
+ /* Firmware hardcodes IPG for SR1.0 */
+ if (emac->is_sr1)
+ return;
/* IPG for 10M is same as 100M */
- icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
+ ipg = MII_RT_TX_IPG_100M;
break;
default:
/* Other links speeds not supported */
netdev_err(emac->ndev, "Unsupported link speed\n");
return;
}
+
+ icssg_mii_update_ipg(prueth->mii_rt, slice, ipg);
}
static void emac_r30_cmd_init(struct prueth_emac *emac)
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH net-next v4 07/10] net: ti: icssg-prueth: Adjust the number of TX channels for SR1.0
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
` (5 preceding siblings ...)
2024-03-05 11:40 ` [PATCH net-next v4 06/10] net: ti: icssg-prueth: Adjust IPG configuration for SR1.0 Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-05 11:40 ` [PATCH net-next v4 08/10] net: ti: icssg-prueth: Add functions to configure SR1.0 packet classifier Diogo Ivo
` (3 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: danishanwar, rogerq, davem, edumazet, kuba, pabeni, andrew,
hkallweit1, linux-arm-kernel, netdev
Cc: Diogo Ivo, jan.kiszka
As SR1.0 uses the current higher priority channel to send commands to
the firmware, take this into account when setting/getting the number
of channels to/from the user.
Based on the work of Roger Quadros in TI's 5.10 SDK [1].
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
---
Changes in v4:
- Add Reviewed-by from Roger
Changes in v3:
- Address Roger's comments on SR1.0 handling
drivers/net/ethernet/ti/icssg/icssg_ethtool.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_ethtool.c b/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
index 9a7dd7efcf69..688a148f32b4 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
@@ -142,6 +142,9 @@ static int emac_set_channels(struct net_device *ndev,
emac->tx_ch_num = ch->tx_count;
+ if (emac->is_sr1)
+ emac->tx_ch_num++;
+
return 0;
}
@@ -152,8 +155,15 @@ static void emac_get_channels(struct net_device *ndev,
ch->max_rx = 1;
ch->max_tx = PRUETH_MAX_TX_QUEUES;
+
+ if (emac->is_sr1)
+ ch->max_tx--;
+
ch->rx_count = 1;
ch->tx_count = emac->tx_ch_num;
+
+ if (emac->is_sr1)
+ ch->tx_count--;
}
static const struct ethtool_rmon_hist_range emac_rmon_ranges[] = {
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH net-next v4 08/10] net: ti: icssg-prueth: Add functions to configure SR1.0 packet classifier
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
` (6 preceding siblings ...)
2024-03-05 11:40 ` [PATCH net-next v4 07/10] net: ti: icssg-prueth: Adjust the number of TX channels " Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-07 13:13 ` Roger Quadros
2024-03-05 11:40 ` [PATCH net-next v4 09/10] net: ti: icssg-prueth: Modify common functions for SR1.0 Diogo Ivo
` (2 subsequent siblings)
10 siblings, 1 reply; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: danishanwar, rogerq, davem, edumazet, kuba, pabeni, andrew,
dan.carpenter, linux-arm-kernel, netdev
Cc: Diogo Ivo, jan.kiszka
Add the functions to configure the SR1.0 packet classifier.
Based on the work of Roger Quadros in TI's 5.10 SDK [1].
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
---
Changes in v4:
- Fix reverse xmastree in icssg_class_ft1_add_mcast()
Changes in v3:
- Replace local variables in icssg_class_add_mcast_sr1()
with eth_reserved_addr_base and eth_ipv4_mcast_addr_base
.../net/ethernet/ti/icssg/icssg_classifier.c | 113 ++++++++++++++++--
drivers/net/ethernet/ti/icssg/icssg_prueth.c | 2 +-
drivers/net/ethernet/ti/icssg/icssg_prueth.h | 6 +-
3 files changed, 110 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_classifier.c b/drivers/net/ethernet/ti/icssg/icssg_classifier.c
index 6df53ab17fbc..79ba47bb3602 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_classifier.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_classifier.c
@@ -274,6 +274,16 @@ static void rx_class_set_or(struct regmap *miig_rt, int slice, int n,
regmap_write(miig_rt, offset, data);
}
+static u32 rx_class_get_or(struct regmap *miig_rt, int slice, int n)
+{
+ u32 offset, val;
+
+ offset = RX_CLASS_N_REG(slice, n, RX_CLASS_OR_EN);
+ regmap_read(miig_rt, offset, &val);
+
+ return val;
+}
+
void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac)
{
regmap_write(miig_rt, MAC_INTERFACE_0, (u32)(mac[0] | mac[1] << 8 |
@@ -288,6 +298,26 @@ void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac)
regmap_write(miig_rt, offs[slice].mac1, (u32)(mac[4] | mac[5] << 8));
}
+static void icssg_class_ft1_add_mcast(struct regmap *miig_rt, int slice,
+ int slot, const u8 *addr, const u8 *mask)
+{
+ u32 val;
+ int i;
+
+ WARN(slot >= FT1_NUM_SLOTS, "invalid slot: %d\n", slot);
+
+ rx_class_ft1_set_da(miig_rt, slice, slot, addr);
+ rx_class_ft1_set_da_mask(miig_rt, slice, slot, mask);
+ rx_class_ft1_cfg_set_type(miig_rt, slice, slot, FT1_CFG_TYPE_EQ);
+
+ /* Enable the FT1 slot in OR enable for all classifiers */
+ for (i = 0; i < ICSSG_NUM_CLASSIFIERS_IN_USE; i++) {
+ val = rx_class_get_or(miig_rt, slice, i);
+ val |= RX_CLASS_FT_FT1_MATCH(slot);
+ rx_class_set_or(miig_rt, slice, i, val);
+ }
+}
+
/* disable all RX traffic */
void icssg_class_disable(struct regmap *miig_rt, int slice)
{
@@ -331,30 +361,95 @@ void icssg_class_disable(struct regmap *miig_rt, int slice)
regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
}
-void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti)
+void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti,
+ bool is_sr1)
{
+ int num_classifiers = is_sr1 ? ICSSG_NUM_CLASSIFIERS_IN_USE : 1;
u32 data;
+ int n;
/* defaults */
icssg_class_disable(miig_rt, slice);
/* Setup Classifier */
- /* match on Broadcast or MAC_PRU address */
- data = RX_CLASS_FT_BC | RX_CLASS_FT_DA_P;
+ for (n = 0; n < num_classifiers; n++) {
+ /* match on Broadcast or MAC_PRU address */
+ data = RX_CLASS_FT_BC | RX_CLASS_FT_DA_P;
- /* multicast */
- if (allmulti)
- data |= RX_CLASS_FT_MC;
+ /* multicast */
+ if (allmulti)
+ data |= RX_CLASS_FT_MC;
- rx_class_set_or(miig_rt, slice, 0, data);
+ rx_class_set_or(miig_rt, slice, n, data);
- /* set CFG1 for OR_OR_AND for classifier */
- rx_class_sel_set_type(miig_rt, slice, 0, RX_CLASS_SEL_TYPE_OR_OR_AND);
+ /* set CFG1 for OR_OR_AND for classifier */
+ rx_class_sel_set_type(miig_rt, slice, n,
+ RX_CLASS_SEL_TYPE_OR_OR_AND);
+ }
/* clear CFG2 */
regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
}
+void icssg_class_promiscuous_sr1(struct regmap *miig_rt, int slice)
+{
+ u32 data, offset;
+ int n;
+
+ /* defaults */
+ icssg_class_disable(miig_rt, slice);
+
+ /* Setup Classifier */
+ for (n = 0; n < ICSSG_NUM_CLASSIFIERS_IN_USE; n++) {
+ /* set RAW_MASK to bypass filters */
+ offset = RX_CLASS_GATES_N_REG(slice, n);
+ regmap_read(miig_rt, offset, &data);
+ data |= RX_CLASS_GATES_RAW_MASK;
+ regmap_write(miig_rt, offset, data);
+ }
+}
+
+void icssg_class_add_mcast_sr1(struct regmap *miig_rt, int slice,
+ struct net_device *ndev)
+{
+ u8 mask_addr[6] = { 0, 0, 0, 0, 0, 0xff };
+ struct netdev_hw_addr *ha;
+ int slot = 2;
+
+ rx_class_ft1_set_start_len(miig_rt, slice, 0, 6);
+ /* reserve first 2 slots for
+ * 1) 01-80-C2-00-00-XX Known Service Ethernet Multicast addresses
+ * 2) 01-00-5e-00-00-XX Local Network Control Block
+ * (224.0.0.0 - 224.0.0.255 (224.0.0/24))
+ */
+ icssg_class_ft1_add_mcast(miig_rt, slice, 0,
+ eth_reserved_addr_base, mask_addr);
+ icssg_class_ft1_add_mcast(miig_rt, slice, 1,
+ eth_ipv4_mcast_addr_base, mask_addr);
+ mask_addr[5] = 0;
+ netdev_for_each_mc_addr(ha, ndev) {
+ /* skip addresses matching reserved slots */
+ if (!memcmp(eth_reserved_addr_base, ha->addr, 5) ||
+ !memcmp(eth_ipv4_mcast_addr_base, ha->addr, 5)) {
+ netdev_dbg(ndev, "mcast skip %pM\n", ha->addr);
+ continue;
+ }
+
+ if (slot >= FT1_NUM_SLOTS) {
+ netdev_dbg(ndev,
+ "can't add more than %d MC addresses, enabling allmulti\n",
+ FT1_NUM_SLOTS);
+ icssg_class_default(miig_rt, slice, 1, true);
+ break;
+ }
+
+ netdev_dbg(ndev, "mcast add %pM\n", ha->addr);
+ icssg_class_ft1_add_mcast(miig_rt, slice, slot,
+ ha->addr, mask_addr);
+ slot++;
+ }
+}
+
/* required for SAV check */
void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr)
{
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index e6eac01f9f99..7d9db9683e18 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -437,7 +437,7 @@ static int emac_ndo_open(struct net_device *ndev)
icssg_class_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
icssg_ft1_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
- icssg_class_default(prueth->miig_rt, slice, 0);
+ icssg_class_default(prueth->miig_rt, slice, 0, false);
/* Notify the stack of the actual queue counts. */
ret = netif_set_real_num_tx_queues(ndev, num_data_chn);
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index c5632a2388a1..21bdb219736a 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -283,7 +283,11 @@ extern const struct dev_pm_ops prueth_dev_pm_ops;
void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac);
void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac);
void icssg_class_disable(struct regmap *miig_rt, int slice);
-void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti);
+void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti,
+ bool is_sr1);
+void icssg_class_promiscuous_sr1(struct regmap *miig_rt, int slice);
+void icssg_class_add_mcast_sr1(struct regmap *miig_rt, int slice,
+ struct net_device *ndev);
void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr);
/* config helpers */
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH net-next v4 08/10] net: ti: icssg-prueth: Add functions to configure SR1.0 packet classifier
2024-03-05 11:40 ` [PATCH net-next v4 08/10] net: ti: icssg-prueth: Add functions to configure SR1.0 packet classifier Diogo Ivo
@ 2024-03-07 13:13 ` Roger Quadros
0 siblings, 0 replies; 17+ messages in thread
From: Roger Quadros @ 2024-03-07 13:13 UTC (permalink / raw)
To: Diogo Ivo, danishanwar, davem, edumazet, kuba, pabeni, andrew,
dan.carpenter, linux-arm-kernel, netdev
Cc: jan.kiszka
On 05/03/2024 13:40, Diogo Ivo wrote:
> Add the functions to configure the SR1.0 packet classifier.
>
> Based on the work of Roger Quadros in TI's 5.10 SDK [1].
>
> [1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
>
> Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
--
cheers,
-roger
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH net-next v4 09/10] net: ti: icssg-prueth: Modify common functions for SR1.0
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
` (7 preceding siblings ...)
2024-03-05 11:40 ` [PATCH net-next v4 08/10] net: ti: icssg-prueth: Add functions to configure SR1.0 packet classifier Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-07 13:15 ` Roger Quadros
2024-03-05 11:40 ` [PATCH net-next v4 10/10] net: ti: icssg-prueth: Add ICSSG Ethernet driver for AM65x SR1.0 platforms Diogo Ivo
2024-03-12 11:36 ` [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices MD Danish Anwar
10 siblings, 1 reply; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: danishanwar, rogerq, davem, edumazet, kuba, pabeni, andrew,
dan.carpenter, linux-arm-kernel, netdev
Cc: Diogo Ivo, jan.kiszka
Some parts of the logic differ only slightly between Silicon Revisions.
In these cases add the bits that differ to a common function that
executes those bits conditionally based on the Silicon Revision.
Based on the work of Roger Quadros, Vignesh Raghavendra and
Grygorii Strashko in TI's 5.10 SDK [1].
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
---
Changes in v4:
- Explicitly check for SR1.0 when managing rxmgm channel
- Pass is_sr1 = false to prueth_get_cores() from SR2.0 driver
drivers/net/ethernet/ti/icssg/icssg_common.c | 46 +++++++++++++++-----
drivers/net/ethernet/ti/icssg/icssg_prueth.c | 4 +-
drivers/net/ethernet/ti/icssg/icssg_prueth.h | 2 +-
3 files changed, 38 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
index 99f27ecc9352..862467771910 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_common.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
@@ -152,6 +152,13 @@ int emac_tx_complete_packets(struct prueth_emac *emac, int chn,
desc_dma);
swdata = cppi5_hdesc_get_swdata(desc_tx);
+ /* was this command's TX complete? */
+ if (emac->is_sr1 && *(swdata) == emac->cmd_data) {
+ prueth_xmit_free(tx_chn, desc_tx);
+ budget++; /* not a data packet */
+ continue;
+ }
+
skb = *(swdata);
prueth_xmit_free(tx_chn, desc_tx);
@@ -327,6 +334,7 @@ int prueth_init_rx_chns(struct prueth_emac *emac,
struct net_device *ndev = emac->ndev;
u32 fdqring_id, hdesc_size;
int i, ret = 0, slice;
+ int flow_id_base;
slice = prueth_emac_slice(emac);
if (slice < 0)
@@ -367,8 +375,14 @@ int prueth_init_rx_chns(struct prueth_emac *emac,
goto fail;
}
- emac->rx_flow_id_base = k3_udma_glue_rx_get_flow_id_base(rx_chn->rx_chn);
- netdev_dbg(ndev, "flow id base = %d\n", emac->rx_flow_id_base);
+ flow_id_base = k3_udma_glue_rx_get_flow_id_base(rx_chn->rx_chn);
+ if (emac->is_sr1 && !strcmp(name, "rxmgm")) {
+ emac->rx_mgm_flow_id_base = flow_id_base;
+ netdev_dbg(ndev, "mgm flow id base = %d\n", flow_id_base);
+ } else {
+ emac->rx_flow_id_base = flow_id_base;
+ netdev_dbg(ndev, "flow id base = %d\n", flow_id_base);
+ }
fdqring_id = K3_RINGACC_RING_ID_ANY;
for (i = 0; i < rx_cfg.flow_id_num; i++) {
@@ -477,10 +491,14 @@ void emac_rx_timestamp(struct prueth_emac *emac,
struct skb_shared_hwtstamps *ssh;
u64 ns;
- u32 hi_sw = readl(emac->prueth->shram.va +
- TIMESYNC_FW_WC_COUNT_HI_SW_OFFSET_OFFSET);
- ns = icssg_ts_to_ns(hi_sw, psdata[1], psdata[0],
- IEP_DEFAULT_CYCLE_TIME_NS);
+ if (emac->is_sr1) {
+ ns = (u64)psdata[1] << 32 | psdata[0];
+ } else {
+ u32 hi_sw = readl(emac->prueth->shram.va +
+ TIMESYNC_FW_WC_COUNT_HI_SW_OFFSET_OFFSET);
+ ns = icssg_ts_to_ns(hi_sw, psdata[1], psdata[0],
+ IEP_DEFAULT_CYCLE_TIME_NS);
+ }
ssh = skb_hwtstamps(skb);
memset(ssh, 0, sizeof(*ssh));
@@ -809,7 +827,8 @@ void prueth_emac_stop(struct prueth_emac *emac)
}
emac->fw_running = 0;
- rproc_shutdown(prueth->txpru[slice]);
+ if (!emac->is_sr1)
+ rproc_shutdown(prueth->txpru[slice]);
rproc_shutdown(prueth->rtu[slice]);
rproc_shutdown(prueth->pru[slice]);
}
@@ -829,8 +848,10 @@ void prueth_cleanup_tx_ts(struct prueth_emac *emac)
int emac_napi_rx_poll(struct napi_struct *napi_rx, int budget)
{
struct prueth_emac *emac = prueth_napi_to_emac(napi_rx);
- int rx_flow = PRUETH_RX_FLOW_DATA;
- int flow = PRUETH_MAX_RX_FLOWS;
+ int rx_flow = emac->is_sr1 ?
+ PRUETH_RX_FLOW_DATA_SR1 : PRUETH_RX_FLOW_DATA;
+ int flow = emac->is_sr1 ?
+ PRUETH_MAX_RX_FLOWS_SR1 : PRUETH_MAX_RX_FLOWS;
int num_rx = 0;
int cur_budget;
int ret;
@@ -1082,7 +1103,7 @@ void prueth_netdev_exit(struct prueth *prueth,
prueth->emac[mac] = NULL;
}
-int prueth_get_cores(struct prueth *prueth, int slice)
+int prueth_get_cores(struct prueth *prueth, int slice, bool is_sr1)
{
struct device *dev = prueth->dev;
enum pruss_pru_id pruss_id;
@@ -1096,7 +1117,7 @@ int prueth_get_cores(struct prueth *prueth, int slice)
idx = 0;
break;
case ICSS_SLICE1:
- idx = 3;
+ idx = is_sr1 ? 2 : 3;
break;
default:
return -EINVAL;
@@ -1118,6 +1139,9 @@ int prueth_get_cores(struct prueth *prueth, int slice)
return dev_err_probe(dev, ret, "unable to get RTU%d\n", slice);
}
+ if (is_sr1)
+ return 0;
+
idx++;
prueth->txpru[slice] = pru_rproc_get(np, idx, NULL);
if (IS_ERR(prueth->txpru[slice])) {
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index 7d9db9683e18..186b0365c2e5 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -907,13 +907,13 @@ static int prueth_probe(struct platform_device *pdev)
}
if (eth0_node) {
- ret = prueth_get_cores(prueth, ICSS_SLICE0);
+ ret = prueth_get_cores(prueth, ICSS_SLICE0, false);
if (ret)
goto put_cores;
}
if (eth1_node) {
- ret = prueth_get_cores(prueth, ICSS_SLICE1);
+ ret = prueth_get_cores(prueth, ICSS_SLICE1, false);
if (ret)
goto put_cores;
}
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index 21bdb219736a..0a1f127b2cf7 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -354,7 +354,7 @@ int prueth_node_port(struct device_node *eth_node);
int prueth_node_mac(struct device_node *eth_node);
void prueth_netdev_exit(struct prueth *prueth,
struct device_node *eth_node);
-int prueth_get_cores(struct prueth *prueth, int slice);
+int prueth_get_cores(struct prueth *prueth, int slice, bool is_sr1);
void prueth_put_cores(struct prueth *prueth, int slice);
/* Revision specific helper */
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH net-next v4 09/10] net: ti: icssg-prueth: Modify common functions for SR1.0
2024-03-05 11:40 ` [PATCH net-next v4 09/10] net: ti: icssg-prueth: Modify common functions for SR1.0 Diogo Ivo
@ 2024-03-07 13:15 ` Roger Quadros
0 siblings, 0 replies; 17+ messages in thread
From: Roger Quadros @ 2024-03-07 13:15 UTC (permalink / raw)
To: Diogo Ivo, danishanwar, davem, edumazet, kuba, pabeni, andrew,
dan.carpenter, linux-arm-kernel, netdev
Cc: jan.kiszka
On 05/03/2024 13:40, Diogo Ivo wrote:
> Some parts of the logic differ only slightly between Silicon Revisions.
> In these cases add the bits that differ to a common function that
> executes those bits conditionally based on the Silicon Revision.
>
> Based on the work of Roger Quadros, Vignesh Raghavendra and
> Grygorii Strashko in TI's 5.10 SDK [1].
>
> [1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
>
> Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
--
cheers,
-roger
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH net-next v4 10/10] net: ti: icssg-prueth: Add ICSSG Ethernet driver for AM65x SR1.0 platforms
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
` (8 preceding siblings ...)
2024-03-05 11:40 ` [PATCH net-next v4 09/10] net: ti: icssg-prueth: Modify common functions for SR1.0 Diogo Ivo
@ 2024-03-05 11:40 ` Diogo Ivo
2024-03-12 11:36 ` [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices MD Danish Anwar
10 siblings, 0 replies; 17+ messages in thread
From: Diogo Ivo @ 2024-03-05 11:40 UTC (permalink / raw)
To: davem, edumazet, kuba, pabeni, danishanwar, rogerq, vigneshr,
arnd, wsa+renesas, vladimir.oltean, andrew, dan.carpenter, netdev,
linux-arm-kernel
Cc: Diogo Ivo, jan.kiszka
Add the PRUeth driver for the ICSSG subsystem found in AM65x SR1.0 devices.
The main differences that set SR1.0 and SR2.0 apart are the missing TXPRU
core in SR1.0, two extra DMA channels for management purposes and different
firmware that needs to be configured accordingly.
Based on the work of Roger Quadros, Vignesh Raghavendra and
Grygorii Strashko in TI's 5.10 SDK [1].
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
---
Changes in v4:
- Convert all fields in icssg_config_sr1() to __le32 (reported by sparse)
- Declare data in emac_send_command_sr1() as __le32 (reported by sparse)
- Fix reverse xmastree variable declaration
Changes in v3:
- Remove full duplex check in icssg_config_set_speed_sr1(),
allowing the firmware to be informed of half duplex operation.
This eliminates the need to unconditionally remove half duplex
modes from being advertised.
- Remove call to icssg_config_half_duplex() in emac_adjust_link_sr1()
as for SR1.0 icssg_config_sr1() already provides a rand_seed.
drivers/net/ethernet/ti/Kconfig | 15 +
drivers/net/ethernet/ti/Makefile | 8 +
.../net/ethernet/ti/icssg/icssg_prueth_sr1.c | 1171 +++++++++++++++++
3 files changed, 1194 insertions(+)
create mode 100644 drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 1530d13984d4..deed1fc33e40 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -198,6 +198,21 @@ config TI_ICSSG_PRUETH
to support the Ethernet operation. Currently, it supports Ethernet
with 1G and 100M link speed.
+config TI_ICSSG_PRUETH_SR1
+ tristate "TI Gigabit PRU SR1.0 Ethernet driver"
+ select PHYLIB
+ select TI_ICSS_IEP
+ select TI_K3_CPPI_DESC_POOL
+ depends on PRU_REMOTEPROC
+ depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
+ help
+ Support dual Gigabit Ethernet ports over the ICSSG PRU Subsystem.
+ This subsystem is available on the AM65 SR1.0 platform.
+
+ This driver requires firmware binaries which will run on the PRUs
+ to support the Ethernet operation. Currently, it supports Ethernet
+ with 1G, 100M and 10M link speed.
+
config TI_ICSS_IEP
tristate "TI PRU ICSS IEP driver"
depends on PTP_1588_CLOCK_OPTIONAL
diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
index 4876f20aa495..6e086b4c0384 100644
--- a/drivers/net/ethernet/ti/Makefile
+++ b/drivers/net/ethernet/ti/Makefile
@@ -40,4 +40,12 @@ icssg-prueth-y := icssg/icssg_prueth.o \
icssg/icssg_mii_cfg.o \
icssg/icssg_stats.o \
icssg/icssg_ethtool.o
+obj-$(CONFIG_TI_ICSSG_PRUETH_SR1) += icssg-prueth-sr1.o
+icssg-prueth-sr1-y := icssg/icssg_prueth_sr1.o \
+ icssg/icssg_common.o \
+ icssg/icssg_classifier.o \
+ icssg/icssg_config.o \
+ icssg/icssg_mii_cfg.o \
+ icssg/icssg_stats.o \
+ icssg/icssg_ethtool.o
obj-$(CONFIG_TI_ICSS_IEP) += icssg/icss_iep.o
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c b/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
new file mode 100644
index 000000000000..d4057f4c2d4d
--- /dev/null
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
@@ -0,0 +1,1171 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Texas Instruments ICSSG SR1.0 Ethernet Driver
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (c) Siemens AG, 2024
+ *
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/genalloc.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/phy.h>
+#include <linux/remoteproc/pruss.h>
+#include <linux/pruss_driver.h>
+
+#include "icssg_prueth.h"
+#include "icssg_mii_rt.h"
+#include "../k3-cppi-desc-pool.h"
+
+#define PRUETH_MODULE_DESCRIPTION "PRUSS ICSSG SR1.0 Ethernet driver"
+
+/* SR1: Set buffer sizes for the pools. There are 8 internal queues
+ * implemented in firmware, but only 4 tx channels/threads in the Egress
+ * direction to firmware. Need a high priority queue for management
+ * messages since they shouldn't be blocked even during high traffic
+ * situation. So use Q0-Q2 as data queues and Q3 as management queue
+ * in the max case. However for ease of configuration, use the max
+ * data queue + 1 for management message if we are not using max
+ * case.
+ *
+ * Allocate 4 MTU buffers per data queue. Firmware requires
+ * pool sizes to be set for internal queues. Set the upper 5 queue
+ * pool size to min size of 128 bytes since there are only 3 tx
+ * data channels and management queue requires only minimum buffer.
+ * i.e lower queues are used by driver and highest priority queue
+ * from that is used for management message.
+ */
+
+static int emac_egress_buf_pool_size[] = {
+ PRUETH_EMAC_BUF_POOL_SIZE_SR1, PRUETH_EMAC_BUF_POOL_SIZE_SR1,
+ PRUETH_EMAC_BUF_POOL_SIZE_SR1, PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1,
+ PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1, PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1,
+ PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1, PRUETH_EMAC_BUF_POOL_MIN_SIZE_SR1
+};
+
+static void icssg_config_sr1(struct prueth *prueth, struct prueth_emac *emac,
+ int slice)
+{
+ struct icssg_sr1_config config;
+ void __iomem *va;
+ int i, index;
+
+ memset(&config, 0, sizeof(config));
+ config.addr_lo = cpu_to_le32(lower_32_bits(prueth->msmcram.pa));
+ config.addr_hi = cpu_to_le32(upper_32_bits(prueth->msmcram.pa));
+ config.num_tx_threads = 0;
+ config.rx_flow_id = cpu_to_le32(emac->rx_flow_id_base); /* flow id for host port */
+ config.rx_mgr_flow_id = cpu_to_le32(emac->rx_mgm_flow_id_base); /* for mgm ch */
+ config.rand_seed = cpu_to_le32(get_random_u32());
+
+ for (i = PRUETH_EMAC_BUF_POOL_START_SR1; i < PRUETH_NUM_BUF_POOLS_SR1; i++) {
+ index = i - PRUETH_EMAC_BUF_POOL_START_SR1;
+ config.tx_buf_sz[i] = cpu_to_le32(emac_egress_buf_pool_size[index]);
+ }
+
+ va = prueth->shram.va + slice * ICSSG_CONFIG_OFFSET_SLICE1;
+ memcpy_toio(va, &config, sizeof(config));
+
+ emac->speed = SPEED_1000;
+ emac->duplex = DUPLEX_FULL;
+}
+
+static int emac_send_command_sr1(struct prueth_emac *emac, u32 cmd)
+{
+ struct cppi5_host_desc_t *first_desc;
+ u32 pkt_len = sizeof(emac->cmd_data);
+ __le32 *data = emac->cmd_data;
+ dma_addr_t desc_dma, buf_dma;
+ struct prueth_tx_chn *tx_chn;
+ void **swdata;
+ int ret = 0;
+ u32 *epib;
+
+ netdev_dbg(emac->ndev, "Sending cmd %x\n", cmd);
+
+ /* only one command at a time allowed to firmware */
+ mutex_lock(&emac->cmd_lock);
+ data[0] = cpu_to_le32(cmd);
+
+ /* highest priority channel for management messages */
+ tx_chn = &emac->tx_chns[emac->tx_ch_num - 1];
+
+ /* Map the linear buffer */
+ buf_dma = dma_map_single(tx_chn->dma_dev, data, pkt_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(tx_chn->dma_dev, buf_dma)) {
+ netdev_err(emac->ndev, "cmd %x: failed to map cmd buffer\n", cmd);
+ ret = -EINVAL;
+ goto err_unlock;
+ }
+
+ first_desc = k3_cppi_desc_pool_alloc(tx_chn->desc_pool);
+ if (!first_desc) {
+ netdev_err(emac->ndev, "cmd %x: failed to allocate descriptor\n", cmd);
+ dma_unmap_single(tx_chn->dma_dev, buf_dma, pkt_len, DMA_TO_DEVICE);
+ ret = -ENOMEM;
+ goto err_unlock;
+ }
+
+ cppi5_hdesc_init(first_desc, CPPI5_INFO0_HDESC_EPIB_PRESENT,
+ PRUETH_NAV_PS_DATA_SIZE);
+ cppi5_hdesc_set_pkttype(first_desc, PRUETH_PKT_TYPE_CMD);
+ epib = first_desc->epib;
+ epib[0] = 0;
+ epib[1] = 0;
+
+ cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
+ swdata = cppi5_hdesc_get_swdata(first_desc);
+ *swdata = data;
+
+ cppi5_hdesc_set_pktlen(first_desc, pkt_len);
+ desc_dma = k3_cppi_desc_pool_virt2dma(tx_chn->desc_pool, first_desc);
+
+ /* send command */
+ reinit_completion(&emac->cmd_complete);
+ ret = k3_udma_glue_push_tx_chn(tx_chn->tx_chn, first_desc, desc_dma);
+ if (ret) {
+ netdev_err(emac->ndev, "cmd %x: push failed: %d\n", cmd, ret);
+ goto free_desc;
+ }
+ ret = wait_for_completion_timeout(&emac->cmd_complete, msecs_to_jiffies(100));
+ if (!ret)
+ netdev_err(emac->ndev, "cmd %x: completion timeout\n", cmd);
+
+ mutex_unlock(&emac->cmd_lock);
+
+ return ret;
+free_desc:
+ prueth_xmit_free(tx_chn, first_desc);
+err_unlock:
+ mutex_unlock(&emac->cmd_lock);
+
+ return ret;
+}
+
+static void icssg_config_set_speed_sr1(struct prueth_emac *emac)
+{
+ u32 cmd = ICSSG_PSTATE_SPEED_DUPLEX_CMD_SR1, val;
+ struct prueth *prueth = emac->prueth;
+ int slice = prueth_emac_slice(emac);
+
+ val = icssg_rgmii_get_speed(prueth->miig_rt, slice);
+ /* firmware expects speed settings in bit 2-1 */
+ val <<= 1;
+ cmd |= val;
+
+ val = icssg_rgmii_get_fullduplex(prueth->miig_rt, slice);
+ /* firmware expects full duplex settings in bit 3 */
+ val <<= 3;
+ cmd |= val;
+
+ emac_send_command_sr1(emac, cmd);
+}
+
+/* called back by PHY layer if there is change in link state of hw port*/
+static void emac_adjust_link_sr1(struct net_device *ndev)
+{
+ struct prueth_emac *emac = netdev_priv(ndev);
+ struct phy_device *phydev = ndev->phydev;
+ struct prueth *prueth = emac->prueth;
+ bool new_state = false;
+ unsigned long flags;
+
+ if (phydev->link) {
+ /* check the mode of operation - full/half duplex */
+ if (phydev->duplex != emac->duplex) {
+ new_state = true;
+ emac->duplex = phydev->duplex;
+ }
+ if (phydev->speed != emac->speed) {
+ new_state = true;
+ emac->speed = phydev->speed;
+ }
+ if (!emac->link) {
+ new_state = true;
+ emac->link = 1;
+ }
+ } else if (emac->link) {
+ new_state = true;
+ emac->link = 0;
+
+ /* f/w should support 100 & 1000 */
+ emac->speed = SPEED_1000;
+
+ /* half duplex may not be supported by f/w */
+ emac->duplex = DUPLEX_FULL;
+ }
+
+ if (new_state) {
+ phy_print_status(phydev);
+
+ /* update RGMII and MII configuration based on PHY negotiated
+ * values
+ */
+ if (emac->link) {
+ /* Set the RGMII cfg for gig en and full duplex */
+ icssg_update_rgmii_cfg(prueth->miig_rt, emac);
+
+ /* update the Tx IPG based on 100M/1G speed */
+ spin_lock_irqsave(&emac->lock, flags);
+ icssg_config_ipg(emac);
+ spin_unlock_irqrestore(&emac->lock, flags);
+ icssg_config_set_speed_sr1(emac);
+ }
+ }
+
+ if (emac->link) {
+ /* reactivate the transmit queue */
+ netif_tx_wake_all_queues(ndev);
+ } else {
+ netif_tx_stop_all_queues(ndev);
+ prueth_cleanup_tx_ts(emac);
+ }
+}
+
+static int emac_phy_connect(struct prueth_emac *emac)
+{
+ struct prueth *prueth = emac->prueth;
+ struct net_device *ndev = emac->ndev;
+ /* connect PHY */
+ ndev->phydev = of_phy_connect(emac->ndev, emac->phy_node,
+ &emac_adjust_link_sr1, 0,
+ emac->phy_if);
+ if (!ndev->phydev) {
+ dev_err(prueth->dev, "couldn't connect to phy %s\n",
+ emac->phy_node->full_name);
+ return -ENODEV;
+ }
+
+ if (!emac->half_duplex) {
+ dev_dbg(prueth->dev, "half duplex mode is not supported\n");
+ phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
+ phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
+ }
+
+ /* remove unsupported modes */
+ phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+ phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_Pause_BIT);
+ phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_Asym_Pause_BIT);
+
+ if (emac->phy_if == PHY_INTERFACE_MODE_MII)
+ phy_set_max_speed(ndev->phydev, SPEED_100);
+
+ return 0;
+}
+
+/* get one packet from requested flow_id
+ *
+ * Returns skb pointer if packet found else NULL
+ * Caller must free the returned skb.
+ */
+static struct sk_buff *prueth_process_rx_mgm(struct prueth_emac *emac,
+ u32 flow_id)
+{
+ struct prueth_rx_chn *rx_chn = &emac->rx_mgm_chn;
+ struct net_device *ndev = emac->ndev;
+ struct cppi5_host_desc_t *desc_rx;
+ struct sk_buff *skb, *new_skb;
+ dma_addr_t desc_dma, buf_dma;
+ u32 buf_dma_len, pkt_len;
+ void **swdata;
+ int ret;
+
+ ret = k3_udma_glue_pop_rx_chn(rx_chn->rx_chn, flow_id, &desc_dma);
+ if (ret) {
+ if (ret != -ENODATA)
+ netdev_err(ndev, "rx mgm pop: failed: %d\n", ret);
+ return NULL;
+ }
+
+ if (cppi5_desc_is_tdcm(desc_dma)) /* Teardown */
+ return NULL;
+
+ desc_rx = k3_cppi_desc_pool_dma2virt(rx_chn->desc_pool, desc_dma);
+
+ /* Fix FW bug about incorrect PSDATA size */
+ if (cppi5_hdesc_get_psdata_size(desc_rx) != PRUETH_NAV_PS_DATA_SIZE) {
+ cppi5_hdesc_update_psdata_size(desc_rx,
+ PRUETH_NAV_PS_DATA_SIZE);
+ }
+
+ swdata = cppi5_hdesc_get_swdata(desc_rx);
+ skb = *swdata;
+ cppi5_hdesc_get_obuf(desc_rx, &buf_dma, &buf_dma_len);
+ pkt_len = cppi5_hdesc_get_pktlen(desc_rx);
+
+ dma_unmap_single(rx_chn->dma_dev, buf_dma, buf_dma_len, DMA_FROM_DEVICE);
+ k3_cppi_desc_pool_free(rx_chn->desc_pool, desc_rx);
+
+ new_skb = netdev_alloc_skb_ip_align(ndev, PRUETH_MAX_PKT_SIZE);
+ /* if allocation fails we drop the packet but push the
+ * descriptor back to the ring with old skb to prevent a stall
+ */
+ if (!new_skb) {
+ netdev_err(ndev,
+ "skb alloc failed, dropped mgm pkt from flow %d\n",
+ flow_id);
+ new_skb = skb;
+ skb = NULL; /* return NULL */
+ } else {
+ /* return the filled skb */
+ skb_put(skb, pkt_len);
+ }
+
+ /* queue another DMA */
+ ret = prueth_dma_rx_push(emac, new_skb, &emac->rx_mgm_chn);
+ if (WARN_ON(ret < 0))
+ dev_kfree_skb_any(new_skb);
+
+ return skb;
+}
+
+static void prueth_tx_ts_sr1(struct prueth_emac *emac,
+ struct emac_tx_ts_response_sr1 *tsr)
+{
+ struct skb_shared_hwtstamps ssh;
+ struct sk_buff *skb;
+ u64 ns;
+
+ ns = (u64)tsr->hi_ts << 32 | tsr->lo_ts;
+
+ if (tsr->cookie >= PRUETH_MAX_TX_TS_REQUESTS) {
+ netdev_dbg(emac->ndev, "Invalid TX TS cookie 0x%x\n",
+ tsr->cookie);
+ return;
+ }
+
+ skb = emac->tx_ts_skb[tsr->cookie];
+ emac->tx_ts_skb[tsr->cookie] = NULL; /* free slot */
+
+ memset(&ssh, 0, sizeof(ssh));
+ ssh.hwtstamp = ns_to_ktime(ns);
+
+ skb_tstamp_tx(skb, &ssh);
+ dev_consume_skb_any(skb);
+}
+
+static irqreturn_t prueth_rx_mgm_ts_thread_sr1(int irq, void *dev_id)
+{
+ struct prueth_emac *emac = dev_id;
+ struct sk_buff *skb;
+
+ skb = prueth_process_rx_mgm(emac, PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1);
+ if (!skb)
+ return IRQ_NONE;
+
+ prueth_tx_ts_sr1(emac, (void *)skb->data);
+ dev_kfree_skb_any(skb);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t prueth_rx_mgm_rsp_thread(int irq, void *dev_id)
+{
+ struct prueth_emac *emac = dev_id;
+ struct sk_buff *skb;
+ u32 rsp;
+
+ skb = prueth_process_rx_mgm(emac, PRUETH_RX_MGM_FLOW_RESPONSE_SR1);
+ if (!skb)
+ return IRQ_NONE;
+
+ /* Process command response */
+ rsp = le32_to_cpu(*(__le32 *)skb->data) & 0xffff0000;
+ if (rsp == ICSSG_SHUTDOWN_CMD_SR1) {
+ netdev_dbg(emac->ndev, "f/w Shutdown cmd resp %x\n", rsp);
+ complete(&emac->cmd_complete);
+ } else if (rsp == ICSSG_PSTATE_SPEED_DUPLEX_CMD_SR1) {
+ netdev_dbg(emac->ndev, "f/w Speed/Duplex cmd rsp %x\n", rsp);
+ complete(&emac->cmd_complete);
+ }
+
+ dev_kfree_skb_any(skb);
+
+ return IRQ_HANDLED;
+}
+
+static struct icssg_firmwares icssg_sr1_emac_firmwares[] = {
+ {
+ .pru = "ti-pruss/am65x-pru0-prueth-fw.elf",
+ .rtu = "ti-pruss/am65x-rtu0-prueth-fw.elf",
+ },
+ {
+ .pru = "ti-pruss/am65x-pru1-prueth-fw.elf",
+ .rtu = "ti-pruss/am65x-rtu1-prueth-fw.elf",
+ }
+};
+
+static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
+{
+ struct icssg_firmwares *firmwares;
+ struct device *dev = prueth->dev;
+ int slice, ret;
+
+ firmwares = icssg_sr1_emac_firmwares;
+
+ slice = prueth_emac_slice(emac);
+ if (slice < 0) {
+ netdev_err(emac->ndev, "invalid port\n");
+ return -EINVAL;
+ }
+
+ icssg_config_sr1(prueth, emac, slice);
+
+ ret = rproc_set_firmware(prueth->pru[slice], firmwares[slice].pru);
+ ret = rproc_boot(prueth->pru[slice]);
+ if (ret) {
+ dev_err(dev, "failed to boot PRU%d: %d\n", slice, ret);
+ return -EINVAL;
+ }
+
+ ret = rproc_set_firmware(prueth->rtu[slice], firmwares[slice].rtu);
+ ret = rproc_boot(prueth->rtu[slice]);
+ if (ret) {
+ dev_err(dev, "failed to boot RTU%d: %d\n", slice, ret);
+ goto halt_pru;
+ }
+
+ emac->fw_running = 1;
+ return 0;
+
+halt_pru:
+ rproc_shutdown(prueth->pru[slice]);
+
+ return ret;
+}
+
+/**
+ * emac_ndo_open - EMAC device open
+ * @ndev: network adapter device
+ *
+ * Called when system wants to start the interface.
+ *
+ * Return: 0 for a successful open, or appropriate error code
+ */
+static int emac_ndo_open(struct net_device *ndev)
+{
+ struct prueth_emac *emac = netdev_priv(ndev);
+ int num_data_chn = emac->tx_ch_num - 1;
+ struct prueth *prueth = emac->prueth;
+ int slice = prueth_emac_slice(emac);
+ struct device *dev = prueth->dev;
+ int max_rx_flows, rx_flow;
+ int ret, i;
+
+ /* clear SMEM and MSMC settings for all slices */
+ if (!prueth->emacs_initialized) {
+ memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
+ memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
+ }
+
+ /* set h/w MAC as user might have re-configured */
+ ether_addr_copy(emac->mac_addr, ndev->dev_addr);
+
+ icssg_class_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
+
+ icssg_class_default(prueth->miig_rt, slice, 0, true);
+
+ /* Notify the stack of the actual queue counts. */
+ ret = netif_set_real_num_tx_queues(ndev, num_data_chn);
+ if (ret) {
+ dev_err(dev, "cannot set real number of tx queues\n");
+ return ret;
+ }
+
+ init_completion(&emac->cmd_complete);
+ ret = prueth_init_tx_chns(emac);
+ if (ret) {
+ dev_err(dev, "failed to init tx channel: %d\n", ret);
+ return ret;
+ }
+
+ max_rx_flows = PRUETH_MAX_RX_FLOWS_SR1;
+ ret = prueth_init_rx_chns(emac, &emac->rx_chns, "rx",
+ max_rx_flows, PRUETH_MAX_RX_DESC);
+ if (ret) {
+ dev_err(dev, "failed to init rx channel: %d\n", ret);
+ goto cleanup_tx;
+ }
+
+ ret = prueth_init_rx_chns(emac, &emac->rx_mgm_chn, "rxmgm",
+ PRUETH_MAX_RX_MGM_FLOWS_SR1,
+ PRUETH_MAX_RX_MGM_DESC_SR1);
+ if (ret) {
+ dev_err(dev, "failed to init rx mgmt channel: %d\n",
+ ret);
+ goto cleanup_rx;
+ }
+
+ ret = prueth_ndev_add_tx_napi(emac);
+ if (ret)
+ goto cleanup_rx_mgm;
+
+ /* we use only the highest priority flow for now i.e. @irq[3] */
+ rx_flow = PRUETH_RX_FLOW_DATA_SR1;
+ ret = request_irq(emac->rx_chns.irq[rx_flow], prueth_rx_irq,
+ IRQF_TRIGGER_HIGH, dev_name(dev), emac);
+ if (ret) {
+ dev_err(dev, "unable to request RX IRQ\n");
+ goto cleanup_napi;
+ }
+
+ ret = request_threaded_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_RESPONSE_SR1],
+ NULL, prueth_rx_mgm_rsp_thread,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ dev_name(dev), emac);
+ if (ret) {
+ dev_err(dev, "unable to request RX Management RSP IRQ\n");
+ goto free_rx_irq;
+ }
+
+ ret = request_threaded_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1],
+ NULL, prueth_rx_mgm_ts_thread_sr1,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ dev_name(dev), emac);
+ if (ret) {
+ dev_err(dev, "unable to request RX Management TS IRQ\n");
+ goto free_rx_mgm_rsp_irq;
+ }
+
+ /* reset and start PRU firmware */
+ ret = prueth_emac_start(prueth, emac);
+ if (ret)
+ goto free_rx_mgmt_ts_irq;
+
+ icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu);
+
+ /* Prepare RX */
+ ret = prueth_prepare_rx_chan(emac, &emac->rx_chns, PRUETH_MAX_PKT_SIZE);
+ if (ret)
+ goto stop;
+
+ ret = prueth_prepare_rx_chan(emac, &emac->rx_mgm_chn, 64);
+ if (ret)
+ goto reset_rx_chn;
+
+ ret = k3_udma_glue_enable_rx_chn(emac->rx_mgm_chn.rx_chn);
+ if (ret)
+ goto reset_rx_chn;
+
+ ret = k3_udma_glue_enable_rx_chn(emac->rx_chns.rx_chn);
+ if (ret)
+ goto reset_rx_mgm_chn;
+
+ for (i = 0; i < emac->tx_ch_num; i++) {
+ ret = k3_udma_glue_enable_tx_chn(emac->tx_chns[i].tx_chn);
+ if (ret)
+ goto reset_tx_chan;
+ }
+
+ /* Enable NAPI in Tx and Rx direction */
+ for (i = 0; i < emac->tx_ch_num; i++)
+ napi_enable(&emac->tx_chns[i].napi_tx);
+ napi_enable(&emac->napi_rx);
+
+ /* start PHY */
+ phy_start(ndev->phydev);
+
+ prueth->emacs_initialized++;
+
+ queue_work(system_long_wq, &emac->stats_work.work);
+
+ return 0;
+
+reset_tx_chan:
+ /* Since interface is not yet up, there is wouldn't be
+ * any SKB for completion. So set false to free_skb
+ */
+ prueth_reset_tx_chan(emac, i, false);
+reset_rx_mgm_chn:
+ prueth_reset_rx_chan(&emac->rx_mgm_chn,
+ PRUETH_MAX_RX_MGM_FLOWS_SR1, true);
+reset_rx_chn:
+ prueth_reset_rx_chan(&emac->rx_chns, max_rx_flows, false);
+stop:
+ prueth_emac_stop(emac);
+free_rx_mgmt_ts_irq:
+ free_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1],
+ emac);
+free_rx_mgm_rsp_irq:
+ free_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_RESPONSE_SR1],
+ emac);
+free_rx_irq:
+ free_irq(emac->rx_chns.irq[rx_flow], emac);
+cleanup_napi:
+ prueth_ndev_del_tx_napi(emac, emac->tx_ch_num);
+cleanup_rx_mgm:
+ prueth_cleanup_rx_chns(emac, &emac->rx_mgm_chn,
+ PRUETH_MAX_RX_MGM_FLOWS_SR1);
+cleanup_rx:
+ prueth_cleanup_rx_chns(emac, &emac->rx_chns, max_rx_flows);
+cleanup_tx:
+ prueth_cleanup_tx_chns(emac);
+
+ return ret;
+}
+
+/**
+ * emac_ndo_stop - EMAC device stop
+ * @ndev: network adapter device
+ *
+ * Called when system wants to stop or down the interface.
+ *
+ * Return: Always 0 (Success)
+ */
+static int emac_ndo_stop(struct net_device *ndev)
+{
+ struct prueth_emac *emac = netdev_priv(ndev);
+ int rx_flow = PRUETH_RX_FLOW_DATA_SR1;
+ struct prueth *prueth = emac->prueth;
+ int max_rx_flows;
+ int ret, i;
+
+ /* inform the upper layers. */
+ netif_tx_stop_all_queues(ndev);
+
+ /* block packets from wire */
+ if (ndev->phydev)
+ phy_stop(ndev->phydev);
+
+ icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac));
+
+ emac_send_command_sr1(emac, ICSSG_SHUTDOWN_CMD_SR1);
+
+ atomic_set(&emac->tdown_cnt, emac->tx_ch_num);
+ /* ensure new tdown_cnt value is visible */
+ smp_mb__after_atomic();
+ /* tear down and disable UDMA channels */
+ reinit_completion(&emac->tdown_complete);
+ for (i = 0; i < emac->tx_ch_num; i++)
+ k3_udma_glue_tdown_tx_chn(emac->tx_chns[i].tx_chn, false);
+
+ ret = wait_for_completion_timeout(&emac->tdown_complete,
+ msecs_to_jiffies(1000));
+ if (!ret)
+ netdev_err(ndev, "tx teardown timeout\n");
+
+ prueth_reset_tx_chan(emac, emac->tx_ch_num, true);
+ for (i = 0; i < emac->tx_ch_num; i++)
+ napi_disable(&emac->tx_chns[i].napi_tx);
+
+ max_rx_flows = PRUETH_MAX_RX_FLOWS_SR1;
+ k3_udma_glue_tdown_rx_chn(emac->rx_chns.rx_chn, true);
+
+ prueth_reset_rx_chan(&emac->rx_chns, max_rx_flows, true);
+ /* Teardown RX MGM channel */
+ k3_udma_glue_tdown_rx_chn(emac->rx_mgm_chn.rx_chn, true);
+ prueth_reset_rx_chan(&emac->rx_mgm_chn,
+ PRUETH_MAX_RX_MGM_FLOWS_SR1, true);
+
+ napi_disable(&emac->napi_rx);
+
+ /* Destroying the queued work in ndo_stop() */
+ cancel_delayed_work_sync(&emac->stats_work);
+
+ /* stop PRUs */
+ prueth_emac_stop(emac);
+
+ free_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_TIMESTAMP_SR1], emac);
+ free_irq(emac->rx_mgm_chn.irq[PRUETH_RX_MGM_FLOW_RESPONSE_SR1], emac);
+ free_irq(emac->rx_chns.irq[rx_flow], emac);
+ prueth_ndev_del_tx_napi(emac, emac->tx_ch_num);
+ prueth_cleanup_tx_chns(emac);
+
+ prueth_cleanup_rx_chns(emac, &emac->rx_mgm_chn, PRUETH_MAX_RX_MGM_FLOWS_SR1);
+ prueth_cleanup_rx_chns(emac, &emac->rx_chns, max_rx_flows);
+
+ prueth->emacs_initialized--;
+
+ return 0;
+}
+
+static void emac_ndo_set_rx_mode_sr1(struct net_device *ndev)
+{
+ struct prueth_emac *emac = netdev_priv(ndev);
+ bool allmulti = ndev->flags & IFF_ALLMULTI;
+ bool promisc = ndev->flags & IFF_PROMISC;
+ struct prueth *prueth = emac->prueth;
+ int slice = prueth_emac_slice(emac);
+
+ if (promisc) {
+ icssg_class_promiscuous_sr1(prueth->miig_rt, slice);
+ return;
+ }
+
+ if (allmulti) {
+ icssg_class_default(prueth->miig_rt, slice, 1, true);
+ return;
+ }
+
+ icssg_class_default(prueth->miig_rt, slice, 0, true);
+ if (!netdev_mc_empty(ndev)) {
+ /* program multicast address list into Classifier */
+ icssg_class_add_mcast_sr1(prueth->miig_rt, slice, ndev);
+ }
+}
+
+static const struct net_device_ops emac_netdev_ops = {
+ .ndo_open = emac_ndo_open,
+ .ndo_stop = emac_ndo_stop,
+ .ndo_start_xmit = emac_ndo_start_xmit,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_tx_timeout = emac_ndo_tx_timeout,
+ .ndo_set_rx_mode = emac_ndo_set_rx_mode_sr1,
+ .ndo_eth_ioctl = emac_ndo_ioctl,
+ .ndo_get_stats64 = emac_ndo_get_stats64,
+ .ndo_get_phys_port_name = emac_ndo_get_phys_port_name,
+};
+
+static int prueth_netdev_init(struct prueth *prueth,
+ struct device_node *eth_node)
+{
+ int ret, num_tx_chn = PRUETH_MAX_TX_QUEUES - 1;
+ struct prueth_emac *emac;
+ struct net_device *ndev;
+ enum prueth_port port;
+ enum prueth_mac mac;
+
+ port = prueth_node_port(eth_node);
+ if (port == PRUETH_PORT_INVALID)
+ return -EINVAL;
+
+ mac = prueth_node_mac(eth_node);
+ if (mac == PRUETH_MAC_INVALID)
+ return -EINVAL;
+
+ ndev = alloc_etherdev_mq(sizeof(*emac), num_tx_chn);
+ if (!ndev)
+ return -ENOMEM;
+
+ emac = netdev_priv(ndev);
+ emac->is_sr1 = 1;
+ emac->prueth = prueth;
+ emac->ndev = ndev;
+ emac->port_id = port;
+ emac->cmd_wq = create_singlethread_workqueue("icssg_cmd_wq");
+ if (!emac->cmd_wq) {
+ ret = -ENOMEM;
+ goto free_ndev;
+ }
+
+ INIT_DELAYED_WORK(&emac->stats_work, emac_stats_work_handler);
+
+ ret = pruss_request_mem_region(prueth->pruss,
+ port == PRUETH_PORT_MII0 ?
+ PRUSS_MEM_DRAM0 : PRUSS_MEM_DRAM1,
+ &emac->dram);
+ if (ret) {
+ dev_err(prueth->dev, "unable to get DRAM: %d\n", ret);
+ ret = -ENOMEM;
+ goto free_wq;
+ }
+
+ /* SR1.0 uses a dedicated high priority channel
+ * to send commands to the firmware
+ */
+ emac->tx_ch_num = 2;
+
+ SET_NETDEV_DEV(ndev, prueth->dev);
+ spin_lock_init(&emac->lock);
+ mutex_init(&emac->cmd_lock);
+
+ emac->phy_node = of_parse_phandle(eth_node, "phy-handle", 0);
+ if (!emac->phy_node && !of_phy_is_fixed_link(eth_node)) {
+ dev_err(prueth->dev, "couldn't find phy-handle\n");
+ ret = -ENODEV;
+ goto free;
+ } else if (of_phy_is_fixed_link(eth_node)) {
+ ret = of_phy_register_fixed_link(eth_node);
+ if (ret) {
+ ret = dev_err_probe(prueth->dev, ret,
+ "failed to register fixed-link phy\n");
+ goto free;
+ }
+
+ emac->phy_node = eth_node;
+ }
+
+ ret = of_get_phy_mode(eth_node, &emac->phy_if);
+ if (ret) {
+ dev_err(prueth->dev, "could not get phy-mode property\n");
+ goto free;
+ }
+
+ if (emac->phy_if != PHY_INTERFACE_MODE_MII &&
+ !phy_interface_mode_is_rgmii(emac->phy_if)) {
+ dev_err(prueth->dev, "PHY mode unsupported %s\n", phy_modes(emac->phy_if));
+ ret = -EINVAL;
+ goto free;
+ }
+
+ /* AM65 SR2.0 has TX Internal delay always enabled by hardware
+ * and it is not possible to disable TX Internal delay. The below
+ * switch case block describes how we handle different phy modes
+ * based on hardware restriction.
+ */
+ switch (emac->phy_if) {
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ emac->phy_if = PHY_INTERFACE_MODE_RGMII_RXID;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ emac->phy_if = PHY_INTERFACE_MODE_RGMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ dev_err(prueth->dev, "RGMII mode without TX delay is not supported");
+ ret = -EINVAL;
+ goto free;
+ default:
+ break;
+ }
+
+ /* get mac address from DT and set private and netdev addr */
+ ret = of_get_ethdev_address(eth_node, ndev);
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ eth_hw_addr_random(ndev);
+ dev_warn(prueth->dev, "port %d: using random MAC addr: %pM\n",
+ port, ndev->dev_addr);
+ }
+ ether_addr_copy(emac->mac_addr, ndev->dev_addr);
+
+ ndev->min_mtu = PRUETH_MIN_PKT_SIZE;
+ ndev->max_mtu = PRUETH_MAX_MTU;
+ ndev->netdev_ops = &emac_netdev_ops;
+ ndev->ethtool_ops = &icssg_ethtool_ops;
+ ndev->hw_features = NETIF_F_SG;
+ ndev->features = ndev->hw_features;
+
+ netif_napi_add(ndev, &emac->napi_rx, emac_napi_rx_poll);
+ prueth->emac[mac] = emac;
+
+ return 0;
+
+free:
+ pruss_release_mem_region(prueth->pruss, &emac->dram);
+free_wq:
+ destroy_workqueue(emac->cmd_wq);
+free_ndev:
+ emac->ndev = NULL;
+ prueth->emac[mac] = NULL;
+ free_netdev(ndev);
+
+ return ret;
+}
+
+static int prueth_probe(struct platform_device *pdev)
+{
+ struct device_node *eth_node, *eth_ports_node;
+ struct device_node *eth0_node = NULL;
+ struct device_node *eth1_node = NULL;
+ struct device *dev = &pdev->dev;
+ struct device_node *np;
+ struct prueth *prueth;
+ struct pruss *pruss;
+ u32 msmc_ram_size;
+ int i, ret;
+
+ np = dev->of_node;
+
+ prueth = devm_kzalloc(dev, sizeof(*prueth), GFP_KERNEL);
+ if (!prueth)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, prueth);
+ prueth->pdev = pdev;
+ prueth->pdata = *(const struct prueth_pdata *)device_get_match_data(dev);
+
+ prueth->dev = dev;
+ eth_ports_node = of_get_child_by_name(np, "ethernet-ports");
+ if (!eth_ports_node)
+ return -ENOENT;
+
+ for_each_child_of_node(eth_ports_node, eth_node) {
+ u32 reg;
+
+ if (strcmp(eth_node->name, "port"))
+ continue;
+ ret = of_property_read_u32(eth_node, "reg", ®);
+ if (ret < 0) {
+ dev_err(dev, "%pOF error reading port_id %d\n",
+ eth_node, ret);
+ }
+
+ of_node_get(eth_node);
+
+ if (reg == 0) {
+ eth0_node = eth_node;
+ if (!of_device_is_available(eth0_node)) {
+ of_node_put(eth0_node);
+ eth0_node = NULL;
+ }
+ } else if (reg == 1) {
+ eth1_node = eth_node;
+ if (!of_device_is_available(eth1_node)) {
+ of_node_put(eth1_node);
+ eth1_node = NULL;
+ }
+ } else {
+ dev_err(dev, "port reg should be 0 or 1\n");
+ }
+ }
+
+ of_node_put(eth_ports_node);
+
+ /* At least one node must be present and available else we fail */
+ if (!eth0_node && !eth1_node) {
+ dev_err(dev, "neither port0 nor port1 node available\n");
+ return -ENODEV;
+ }
+
+ if (eth0_node == eth1_node) {
+ dev_err(dev, "port0 and port1 can't have same reg\n");
+ of_node_put(eth0_node);
+ return -ENODEV;
+ }
+
+ prueth->eth_node[PRUETH_MAC0] = eth0_node;
+ prueth->eth_node[PRUETH_MAC1] = eth1_node;
+
+ prueth->miig_rt = syscon_regmap_lookup_by_phandle(np, "ti,mii-g-rt");
+ if (IS_ERR(prueth->miig_rt)) {
+ dev_err(dev, "couldn't get ti,mii-g-rt syscon regmap\n");
+ return -ENODEV;
+ }
+
+ prueth->mii_rt = syscon_regmap_lookup_by_phandle(np, "ti,mii-rt");
+ if (IS_ERR(prueth->mii_rt)) {
+ dev_err(dev, "couldn't get ti,mii-rt syscon regmap\n");
+ return -ENODEV;
+ }
+
+ if (eth0_node) {
+ ret = prueth_get_cores(prueth, ICSS_SLICE0, true);
+ if (ret)
+ goto put_cores;
+ }
+
+ if (eth1_node) {
+ ret = prueth_get_cores(prueth, ICSS_SLICE1, true);
+ if (ret)
+ goto put_cores;
+ }
+
+ pruss = pruss_get(eth0_node ?
+ prueth->pru[ICSS_SLICE0] : prueth->pru[ICSS_SLICE1]);
+ if (IS_ERR(pruss)) {
+ ret = PTR_ERR(pruss);
+ dev_err(dev, "unable to get pruss handle\n");
+ goto put_cores;
+ }
+
+ prueth->pruss = pruss;
+
+ ret = pruss_request_mem_region(pruss, PRUSS_MEM_SHRD_RAM2,
+ &prueth->shram);
+ if (ret) {
+ dev_err(dev, "unable to get PRUSS SHRD RAM2: %d\n", ret);
+ goto put_pruss;
+ }
+
+ prueth->sram_pool = of_gen_pool_get(np, "sram", 0);
+ if (!prueth->sram_pool) {
+ dev_err(dev, "unable to get SRAM pool\n");
+ ret = -ENODEV;
+
+ goto put_mem;
+ }
+
+ msmc_ram_size = MSMC_RAM_SIZE_SR1;
+
+ prueth->msmcram.va = (void __iomem *)gen_pool_alloc(prueth->sram_pool,
+ msmc_ram_size);
+
+ if (!prueth->msmcram.va) {
+ ret = -ENOMEM;
+ dev_err(dev, "unable to allocate MSMC resource\n");
+ goto put_mem;
+ }
+ prueth->msmcram.pa = gen_pool_virt_to_phys(prueth->sram_pool,
+ (unsigned long)prueth->msmcram.va);
+ prueth->msmcram.size = msmc_ram_size;
+ memset_io(prueth->msmcram.va, 0, msmc_ram_size);
+ dev_dbg(dev, "sram: pa %llx va %p size %zx\n", prueth->msmcram.pa,
+ prueth->msmcram.va, prueth->msmcram.size);
+
+ if (eth0_node) {
+ ret = prueth_netdev_init(prueth, eth0_node);
+ if (ret) {
+ dev_err_probe(dev, ret, "netdev init %s failed\n",
+ eth0_node->name);
+ goto free_pool;
+ }
+
+ if (of_find_property(eth0_node, "ti,half-duplex-capable", NULL))
+ prueth->emac[PRUETH_MAC0]->half_duplex = 1;
+ }
+
+ if (eth1_node) {
+ ret = prueth_netdev_init(prueth, eth1_node);
+ if (ret) {
+ dev_err_probe(dev, ret, "netdev init %s failed\n",
+ eth1_node->name);
+ goto netdev_exit;
+ }
+
+ if (of_find_property(eth1_node, "ti,half-duplex-capable", NULL))
+ prueth->emac[PRUETH_MAC1]->half_duplex = 1;
+ }
+
+ /* register the network devices */
+ if (eth0_node) {
+ ret = register_netdev(prueth->emac[PRUETH_MAC0]->ndev);
+ if (ret) {
+ dev_err(dev, "can't register netdev for port MII0\n");
+ goto netdev_exit;
+ }
+
+ prueth->registered_netdevs[PRUETH_MAC0] = prueth->emac[PRUETH_MAC0]->ndev;
+ emac_phy_connect(prueth->emac[PRUETH_MAC0]);
+ phy_attached_info(prueth->emac[PRUETH_MAC0]->ndev->phydev);
+ }
+
+ if (eth1_node) {
+ ret = register_netdev(prueth->emac[PRUETH_MAC1]->ndev);
+ if (ret) {
+ dev_err(dev, "can't register netdev for port MII1\n");
+ goto netdev_unregister;
+ }
+
+ prueth->registered_netdevs[PRUETH_MAC1] = prueth->emac[PRUETH_MAC1]->ndev;
+ emac_phy_connect(prueth->emac[PRUETH_MAC1]);
+ phy_attached_info(prueth->emac[PRUETH_MAC1]->ndev->phydev);
+ }
+
+ dev_info(dev, "TI PRU SR1.0 ethernet driver initialized: %s EMAC mode\n",
+ (!eth0_node || !eth1_node) ? "single" : "dual");
+
+ if (eth1_node)
+ of_node_put(eth1_node);
+ if (eth0_node)
+ of_node_put(eth0_node);
+
+ return 0;
+
+netdev_unregister:
+ for (i = 0; i < PRUETH_NUM_MACS; i++) {
+ if (!prueth->registered_netdevs[i])
+ continue;
+
+ if (prueth->emac[i]->ndev->phydev) {
+ phy_disconnect(prueth->emac[i]->ndev->phydev);
+ prueth->emac[i]->ndev->phydev = NULL;
+ }
+ unregister_netdev(prueth->registered_netdevs[i]);
+ }
+
+netdev_exit:
+ for (i = 0; i < PRUETH_NUM_MACS; i++) {
+ eth_node = prueth->eth_node[i];
+ if (!eth_node)
+ continue;
+
+ prueth_netdev_exit(prueth, eth_node);
+ }
+
+free_pool:
+ gen_pool_free(prueth->sram_pool,
+ (unsigned long)prueth->msmcram.va, msmc_ram_size);
+
+put_mem:
+ pruss_release_mem_region(prueth->pruss, &prueth->shram);
+
+put_pruss:
+ pruss_put(prueth->pruss);
+
+put_cores:
+ if (eth1_node) {
+ prueth_put_cores(prueth, ICSS_SLICE1);
+ of_node_put(eth1_node);
+ }
+
+ if (eth0_node) {
+ prueth_put_cores(prueth, ICSS_SLICE0);
+ of_node_put(eth0_node);
+ }
+
+ return ret;
+}
+
+static void prueth_remove(struct platform_device *pdev)
+{
+ struct prueth *prueth = platform_get_drvdata(pdev);
+ struct device_node *eth_node;
+ int i;
+
+ for (i = 0; i < PRUETH_NUM_MACS; i++) {
+ if (!prueth->registered_netdevs[i])
+ continue;
+ phy_stop(prueth->emac[i]->ndev->phydev);
+ phy_disconnect(prueth->emac[i]->ndev->phydev);
+ prueth->emac[i]->ndev->phydev = NULL;
+ unregister_netdev(prueth->registered_netdevs[i]);
+ }
+
+ for (i = 0; i < PRUETH_NUM_MACS; i++) {
+ eth_node = prueth->eth_node[i];
+ if (!eth_node)
+ continue;
+
+ prueth_netdev_exit(prueth, eth_node);
+ }
+
+ gen_pool_free(prueth->sram_pool,
+ (unsigned long)prueth->msmcram.va,
+ MSMC_RAM_SIZE_SR1);
+
+ pruss_release_mem_region(prueth->pruss, &prueth->shram);
+
+ pruss_put(prueth->pruss);
+
+ if (prueth->eth_node[PRUETH_MAC1])
+ prueth_put_cores(prueth, ICSS_SLICE1);
+
+ if (prueth->eth_node[PRUETH_MAC0])
+ prueth_put_cores(prueth, ICSS_SLICE0);
+}
+
+static const struct prueth_pdata am654_sr1_icssg_pdata = {
+ .fdqring_mode = K3_RINGACC_RING_MODE_MESSAGE,
+};
+
+static const struct of_device_id prueth_dt_match[] = {
+ { .compatible = "ti,am654-sr1-icssg-prueth", .data = &am654_sr1_icssg_pdata },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, prueth_dt_match);
+
+static struct platform_driver prueth_driver = {
+ .probe = prueth_probe,
+ .remove_new = prueth_remove,
+ .driver = {
+ .name = "icssg-prueth-sr1",
+ .of_match_table = prueth_dt_match,
+ .pm = &prueth_dev_pm_ops,
+ },
+};
+module_platform_driver(prueth_driver);
+
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
+MODULE_AUTHOR("Md Danish Anwar <danishanwar@ti.com>");
+MODULE_AUTHOR("Diogo Ivo <diogo.ivo@siemens.com>");
+MODULE_DESCRIPTION(PRUETH_MODULE_DESCRIPTION);
+MODULE_LICENSE("GPL");
--
2.44.0
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices
2024-03-05 11:40 [PATCH net-next v4 00/10] Support ICSSG-based Ethernet on AM65x SR1.0 devices Diogo Ivo
` (9 preceding siblings ...)
2024-03-05 11:40 ` [PATCH net-next v4 10/10] net: ti: icssg-prueth: Add ICSSG Ethernet driver for AM65x SR1.0 platforms Diogo Ivo
@ 2024-03-12 11:36 ` MD Danish Anwar
10 siblings, 0 replies; 17+ messages in thread
From: MD Danish Anwar @ 2024-03-12 11:36 UTC (permalink / raw)
To: Diogo Ivo, rogerq, davem, edumazet, kuba, pabeni, andrew,
dan.carpenter, jacob.e.keller, robh, robh+dt,
krzysztof.kozlowski+dt, conor+dt, vigneshr, wsa+renesas,
hkallweit1, arnd, vladimir.oltean, linux-arm-kernel, netdev,
devicetree
Cc: jan.kiszka
Hi Diogo,
On 05/03/24 5:10 pm, Diogo Ivo wrote:
> Hello,
>
> This series extends the current ICSSG-based Ethernet driver to support
> AM65x Silicon Revision 1.0 devices.
>
> Notable differences between the Silicon Revisions are that there is
> no TX core in SR1.0 with this being handled by the firmware, requiring
> extra DMA channels to manage communication with the firmware (with the
> firmware being different as well) and in the packet classifier.
>
> The motivation behind it is that a significant number of Siemens
> devices containing SR1.0 silicon have been deployed in the field
> and need to be supported and updated to newer kernel versions
> without losing functionality.
>
> This series is based on TI's 5.10 SDK [1].
>
> The third version of this patch series can be found in [2].
>
> Detailed descriptions of the changes in this series can be found in
> each commit's message.
>
> However, in its current form the driver has two problems:
> - Setting the link to 100Mbit/s and half duplex results in slower than
> expected speeds. We have identified that this comes from
> icssg_rgmii_get_fullduplex() misreporting a full duplex connection
> and thus we send the wrong command to the firmware.
>
> - When using 3 TX channels we observe a timeout on TX queue 0. We have
> made no real progress on this front in identifying the root cause.
>
> For both of these topics help from someone more familiar with the hardware
> would be greatly appreciated so that we can support these features rather
> than disable them in the final driver version.
>
> [1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
> [2]: https://lore.kernel.org/netdev/20240221152421.112324-1-diogo.ivo@siemens.com/
>
> Diogo Ivo (10):
> dt-bindings: net: Add support for AM65x SR1.0 in ICSSG
> eth: Move IPv4/IPv6 multicast address bases to their own symbols
> net: ti: icssg-prueth: Move common functions into a separate file
> net: ti: icssg-prueth: Add SR1.0-specific configuration bits
> net: ti: icssg-prueth: Add SR1.0-specific description bits
> net: ti: icssg-prueth: Adjust IPG configuration for SR1.0
> net: ti: icssg-prueth: Adjust the number of TX channels for SR1.0
> net: ti: icssg-prueth: Add functions to configure SR1.0 packet
> classifier
> net: ti: icssg-prueth: Modify common functions for SR1.0
> net: ti: icssg-prueth: Add ICSSG Ethernet driver for AM65x SR1.0
> platforms
>
> .../bindings/net/ti,icssg-prueth.yaml | 35 +-
> drivers/net/ethernet/ti/Kconfig | 15 +
> drivers/net/ethernet/ti/Makefile | 9 +
> .../net/ethernet/ti/icssg/icssg_classifier.c | 113 +-
> drivers/net/ethernet/ti/icssg/icssg_common.c | 1222 +++++++++++++++++
> drivers/net/ethernet/ti/icssg/icssg_config.c | 14 +-
> drivers/net/ethernet/ti/icssg/icssg_config.h | 56 +
> drivers/net/ethernet/ti/icssg/icssg_ethtool.c | 10 +
> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 1189 +---------------
> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 79 +-
> .../net/ethernet/ti/icssg/icssg_prueth_sr1.c | 1171 ++++++++++++++++
> include/linux/etherdevice.h | 12 +-
> 12 files changed, 2715 insertions(+), 1210 deletions(-)
> create mode 100644 drivers/net/ethernet/ti/icssg/icssg_common.c
> create mode 100644 drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c
>
This series doesn't break any existing functionality of ICSSG driver on
AM654x SR2.0. The series looks ok to me.
For this series,
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
--
Thanks and Regards,
Danish
^ permalink raw reply [flat|nested] 17+ messages in thread