From: Jeff Garzik <jgarzik@mandrakesoft.com>
To: Donald Becker <becker@scyld.com>
Cc: netdev@oss.sgi.com, Jason Lunz <lunz@falooley.org>,
Richard Gooch <rgooch@ras.ucalgary.ca>,
"Patrick R. McManus" <mcmanus@ducksong.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
edward_peng@dlink.com.tw
Subject: PATCH: sundance #3
Date: Thu, 19 Sep 2002 14:18:14 -0400 [thread overview]
Message-ID: <3D8A14E6.6000105@mandrakesoft.com> (raw)
In-Reply-To: Pine.LNX.4.44.0209191316300.29420-100000@beohost.scyld.com
[-- Attachment #1: Type: text/plain, Size: 110 bytes --]
The obvious sundance #3 patch follows... cumulative to the
sundance-1.04 base patch, and sundance #2 patch.
[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 5293 bytes --]
diff -Nru a/drivers/net/sundance.c b/drivers/net/sundance.c
--- a/drivers/net/sundance.c Thu Sep 19 14:16:21 2002
+++ b/drivers/net/sundance.c Thu Sep 19 14:16:21 2002
@@ -41,10 +41,17 @@
- Autodetect where mii_preable_required is needed,
default to not needed. (Donald Becker)
+ Version LK1.04b:
+ - Remove mii_preamble_required module parameter (Donald Becker)
+ - Add per-interface mii_preamble_required (setting is autodetected)
+ (Donald Becker)
+ - Remove unnecessary cast from void pointer
+ - Re-align comments in private struct
+
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.04a"
+#define DRV_VERSION "1.01+LK1.04b"
#define DRV_RELDATE "19-Sep-2002"
@@ -81,10 +88,6 @@
#define MAX_UNITS 8
static char *media[MAX_UNITS];
-/* Set iff a MII transceiver on any interface requires mdio preamble.
- This only set with older tranceivers, so the extra
- code size of a per-interface flag is not worthwhile. */
-static int mii_preamble_required = 0;
/* Operational parameters that are set at compile time. */
@@ -159,13 +162,11 @@
MODULE_PARM(rx_copybreak, "i");
MODULE_PARM(media, "1-" __MODULE_STRING(MAX_UNITS) "s");
MODULE_PARM(flowctrl, "i");
-MODULE_PARM(mii_preamble_required, "i");
MODULE_PARM_DESC(max_interrupt_work, "Sundance Alta maximum events handled per interrupt");
MODULE_PARM_DESC(mtu, "Sundance Alta MTU (all boards)");
MODULE_PARM_DESC(debug, "Sundance Alta debug level (0-5)");
MODULE_PARM_DESC(rx_copybreak, "Sundance Alta copy breakpoint for copy-only-tiny-frames");
MODULE_PARM_DESC(flowctrl, "Sundance Alta flow control [0|1]");
-MODULE_PARM_DESC(mii_preamble_required, "Set to send a preamble before MII management transactions");
/*
Theory of Operation
@@ -418,17 +419,17 @@
dma_addr_t tx_ring_dma;
dma_addr_t rx_ring_dma;
struct net_device_stats stats;
- struct timer_list timer; /* Media monitoring timer. */
+ struct timer_list timer; /* Media monitoring timer. */
/* Frequently used values: keep some adjacent for cache effect. */
spinlock_t lock;
- spinlock_t rx_lock; /* Group with Tx control cache line. */
+ spinlock_t rx_lock; /* Group with Tx control cache line. */
int chip_id;
unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
- unsigned int rx_buf_sz; /* Based on MTU+slack. */
+ unsigned int rx_buf_sz; /* Based on MTU+slack. */
struct netdev_desc *last_tx; /* Last Tx descriptor used. */
unsigned int cur_tx, dirty_tx;
/* These values are keep track of the transceiver/media in use. */
- unsigned int full_duplex:1; /* Full-duplex operation requested. */
+ unsigned int full_duplex:1; /* Full-duplex operation requested. */
unsigned int flowctrl:1;
unsigned int default_port:4; /* Last dev->if_port value. */
unsigned int an_enable:1;
@@ -436,10 +437,11 @@
struct tasklet_struct rx_tasklet;
int budget;
/* Multicast and receive mode. */
- spinlock_t mcastlock; /* SMP lock multicast updates. */
+ spinlock_t mcastlock; /* SMP lock multicast updates. */
u16 mcast_filter[4];
/* MII transceiver section. */
- u16 advertising; /* NWay media advertisement */
+ int mii_preamble_required;
+ u16 advertising; /* NWay media advertisement */
unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */
struct pci_dev *pci_dev;
};
@@ -569,20 +571,20 @@
if (1) {
int phy, phy_idx = 0;
np->phys[0] = 1; /* Default setting */
- mii_preamble_required++;
+ np->mii_preamble_required++;
for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
int mii_status = mdio_read(dev, phy, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
np->phys[phy_idx++] = phy;
np->advertising = mdio_read(dev, phy, MII_ADVERTISE);
if ((mii_status & 0x0040) == 0)
- mii_preamble_required++;
+ np->mii_preamble_required++;
printk(KERN_INFO "%s: MII PHY found at address %d, status "
"0x%4.4x advertising %4.4x.\n",
dev->name, phy, mii_status, np->advertising);
}
}
- mii_preamble_required--;
+ np->mii_preamble_required--;
if (phy_idx == 0) {
printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n",
@@ -722,11 +724,12 @@
static int mdio_read(struct net_device *dev, int phy_id, int location)
{
+ struct netdev_private *np = dev->priv;
long mdio_addr = dev->base_addr + MIICtrl;
int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
int i, retval = 0;
- if (mii_preamble_required)
+ if (np->mii_preamble_required)
mdio_sync(mdio_addr);
/* Shift the read command bits out. */
@@ -751,11 +754,12 @@
static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
{
+ struct netdev_private *np = dev->priv;
long mdio_addr = dev->base_addr + MIICtrl;
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
int i;
- if (mii_preamble_required)
+ if (np->mii_preamble_required)
mdio_sync(mdio_addr);
/* Shift the command bits out. */
@@ -969,7 +973,7 @@
static int
start_tx (struct sk_buff *skb, struct net_device *dev)
{
- struct netdev_private *np = (struct netdev_private *) dev->priv;
+ struct netdev_private *np = dev->priv;
struct netdev_desc *txdesc;
unsigned entry;
long ioaddr = dev->base_addr;
next prev parent reply other threads:[~2002-09-19 18:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-28 18:56 [PATCH] 2.4.20-pre sundance.c cleanups Jason Lunz
2002-08-28 23:13 ` Jason Lunz
2002-09-19 3:53 ` Richard Gooch
2002-09-19 4:14 ` Jason Lunz
2002-09-19 4:25 ` [PATCH] 2.4.20-pre sundance.c update Jeff Garzik
2002-09-19 4:56 ` Jason Lunz
2002-09-19 5:11 ` Jeff Garzik
2002-09-19 13:23 ` Donald Becker
2002-09-19 17:12 ` PATCH: sundance #2 Jeff Garzik
2002-09-19 17:29 ` Donald Becker
2002-09-19 18:13 ` Jeff Garzik
2002-09-19 18:18 ` Jeff Garzik [this message]
2002-09-19 19:30 ` PATCH: sundance #4 Jeff Garzik
2002-09-19 20:51 ` PATCH: sundance #4a Jason Lunz
2002-09-19 21:09 ` Jeff Garzik
2002-09-19 20:52 ` PATCH: sundance #4b Jason Lunz
2002-09-19 21:14 ` Jeff Garzik
2002-09-19 21:03 ` PATCH: sundance #5 (variable per-interface MTU support) Jason Lunz
2002-09-19 21:19 ` Jeff Garzik
2002-09-19 22:28 ` Donald Becker
2002-09-19 21:35 ` PATCH: [my] sundance #5 Jeff Garzik
2002-09-20 0:18 ` PATCH: sundance #6 Jeff Garzik
2002-09-19 6:42 ` [PATCH] 2.4.20-pre sundance.c cleanups Richard Gooch
2002-09-19 7:11 ` Keith Owens
2002-09-19 12:58 ` Donald Becker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D8A14E6.6000105@mandrakesoft.com \
--to=jgarzik@mandrakesoft.com \
--cc=becker@scyld.com \
--cc=edward_peng@dlink.com.tw \
--cc=linux-kernel@vger.kernel.org \
--cc=lunz@falooley.org \
--cc=mcmanus@ducksong.com \
--cc=netdev@oss.sgi.com \
--cc=rgooch@ras.ucalgary.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).