From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Greear Subject: Re: tulip NAPI patch that works with 2.4.20-pre9 or so? Date: Sun, 20 Oct 2002 15:44:47 -0700 Sender: netdev-bounce@oss.sgi.com Message-ID: <3DB331DF.9090401@candelatech.com> References: <3DB1D6B5.6080305@candelatech.com> <15795.2902.180818.661384@robur.slu.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Cc: "'netdev@oss.sgi.com'" Return-path: To: Robert Olsson Errors-to: netdev-bounce@oss.sgi.com List-Id: netdev.vger.kernel.org Robert Olsson wrote: > Ben Greear writes: > > The latest NAPI tulip patch I could find (tulip-020922.pat) > > will not load. The problem appears that the tulip_misc.c file > > no longer exists... > > :-( I'll look into it. > > > > If anyone has a newer patch, I'd love to try it out. > > Try Jamal's drop-in-replacement > http://www.cyberus.ca/~hadi/patches/tulip-napi.tgz This one froze up after a few seconds on a p430 Phobos 4-port NIC. (60Mbps on one port, 10Mbps on the others) However, becker's driver hangs as well, and the 4x5 driver doesn't even get started... The driver in 2.4.20-pre9 works pretty good...but I seem to get rx lockups from time to time... Still trying to figure out how to work around that problem... I'll donate a NIC to a driver hacker if they think that will help them fix the problem. Thanks, Ben > > Cheers. > --ro > -- Ben Greear President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear