[BK/GNU] net driver series 11

[BK/GNU] net driver series 11

[Jeff Garzik]

[-- Attachment #1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #2: net-drivers-2.4.txt --]
[-- Type: text/plain, Size: 6224 bytes --]

Marcelo, please do a

	bk pull http://gkernel.bkbits.net/net-drivers-2.4

This will update the following files:

 Documentation/networking/e100.txt  |   99 ++++------
 Documentation/networking/e1000.txt |   22 +-
 drivers/net/e100/e100.h            |    8 
 drivers/net/e100/e100_main.c       |  220 ++++++++---------------
 drivers/net/e100/e100_proc.c       |   22 +-
 drivers/net/e1000/e1000.h          |   10 +
 drivers/net/e1000/e1000_ethtool.c  |   29 ---
 drivers/net/e1000/e1000_hw.c       |   56 ++++-
 drivers/net/e1000/e1000_hw.h       |   33 ++-
 drivers/net/e1000/e1000_main.c     |  167 +++++++++++------
 drivers/net/e1000/e1000_osdep.h    |    2 
 drivers/net/e1000/e1000_param.c    |  105 +++++------
 drivers/net/e1000/e1000_proc.c     |   30 +--
 drivers/net/eepro100.c             |  349 +++++++++++++++++++------------------
 drivers/net/ewrk3.c                |  320 ++++++++++++++++++++++++++++-----
 drivers/net/mii.c                  |   11 -
 drivers/net/natsemi.c              |    6 
 drivers/net/pcnet32.c              |   36 +++
 18 files changed, 892 insertions(+), 633 deletions(-)

through these ChangeSets:

<thockin@freakshow.cobalt.com> (02/10/23 1.746.1.5)
   drivers/net/eepro100.c: set phy_id_mask and reg_num_mask in mii_if

<thockin@freakshow.cobalt.com> (02/10/23 1.746.1.4)
   drivers/net/mii.c: fix flipped logic

<thockin@freakshow.cobalt.com> (02/10/23 1.746.1.3)
   drivers/net/eepro100.c: set the PHY ID correctly

<key@austin.ibm.com> (02/10/21 1.749.1.7)
   Add link status checking to pcnet32 net driver

<akropel1@rochester.rr.com> (02/10/21 1.749.1.5)
   Last ewrk3 for now. Updates the changelog to cover previous patches, bumps the
   revision number, and replaces the horrific EthwrkSignature function with
   something (slightly) less horrific.

<akropel1@rochester.rr.com> (02/10/21 1.749.1.4)
   This patch adds some locking fixups to the ewrk3 ioctl routine. None of these
   are critical since the ioctls AFAIK are used only by the EEPROM config utility.

<jgarzik@redhat.com> (02/10/21 1.749.1.3)
   Remove cli/sti from ewrk3 net driver.
   Also, comment out ETHTOOL_PHYS_ID until its sleeping is fixed.
     
   Originally by Denis Vlasenko, then via Adam Kropelin, and
   finally cleaned up by me.

<thockin@freakshow.cobalt.com> (02/10/21 1.746.1.2)
   drivers/net/eepro100.c: cleanup messages that pop up since netif_msg_xxx change

<akropel1@rochester.rr.com> (02/10/21 1.749.1.2)
   The following patch adds support for ethtool to the ewrk3 driver. It is against
   2.5-BK but should apply to any recent 2.5 and 2.4 as well. In addition to adding
   ethtool support, it also removes the cli/sti fixup attribution from the
   changelog since that didn't actually go in yet and fixes a small style issue I
   introduced in the multi-card support patch.
   
   This has been tested on an SMP x86 box containing 3 DE205 NICs.

<scott.feldman@intel.com> (02/10/18 1.742.1.18)
   e100 5/5:
   * updates to Documentation/networking/e100.txt
   

<scott.feldman@intel.com> (02/10/18 1.742.1.17)
   e100 4/5:
   * Updated change log
   * Adding notifier to track ifname change for /proc info 
   

<scott.feldman@intel.com> (02/10/18 1.742.1.16)
   e100 3/5:
   * Added meaningful message for self-test failures
   * Removed confusing messages from probe when link isn't detected
   

<scott.feldman@intel.com> (02/10/18 1.742.1.15)
   e100 2/5:
   * Remove broken home-grown Rx polling mode (make way for NAPI)
   

<scott.feldman@intel.com> (02/10/18 1.742.1.14)
   e100 1/5:
   * C99 struct initializer format
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.13)
   e1000 11/11:
   * Documentation/networking/e1000.txt updates 
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.12)
   e1000 10/11:
   * C99 struct initializer format 
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.11)
   e1000 9/11:
   * Added bullets to changelog 
   * Whitespace cleanup 
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.10)
   e1000 8/11:
   * Forcing 1000/fd is easier to undo with ethtool
   * Adapters supporting WoL capabilities are now an inclusive versus
     exclusive list
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.9)
   e1000 7/11:
   * Added software interrupt to ensure rx ring is cleaned in case 
     of previous allocation failures 
   * Filled netdev->mem_end member 
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.8)
   e1000 6/11:
   * Adding notifier to track ifname change for /proc info 
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.7)
   e1000 5/11:
   * 2/3 wire downshift phy bits changed in newer phy revs 
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.6)
   e1000 4/11:
   * Newer controllers required manual phy PM enable for WoL to work 
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.5)
   e1000 3/11:
   * Set interrupt delay timer default to 0 across all adapters
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.4)
   e1000 2/11:
   * Changed flow control defaults to minimize packet drops
   

<jeb.j.cramer@intel.com> (02/10/18 1.742.1.3)
   e1000 1/11:
   * add new pci ids

<thockin@freakshow.cobalt.com> (02/10/17 1.742.1.2)
   drivers/net/eepro100.c: eliminate speedo_intrmask

<thockin@freakshow.cobalt.com> (02/10/17 1.737.3.8)
   drivers/net/eepro100.c: compile bugs

<thockin@freakshow.cobalt.com> (02/10/16 1.737.3.7)
   drivers/net/natsemi.c: init msg_enable in proper way

<sparker@sun.com> (02/10/16 1.737.3.6)
   drivers/net/eepro100.c: mask the interrupt and do a small delay on close()

<sparker@sun.com> (02/10/16 1.737.3.5)
   drivers/net/eepro100.c: only set priv->last_rx_time if we did work

<sparker@sun.com> (02/10/16 1.737.3.4)
   drivers/net/eepro100.c: simplify wait_for_cmd_done(), better errors

<thockin@freakshow.cobalt.com> (02/10/16 1.737.3.3)
   drivers/net/eepro100.c:
   * use netif_msg_xxx() instead of speedo_debug
   * better default debug mask, proper use of debug module param
   * add ETHTOOL_[GS]MSGLVL

<thockin@freakshow.cobalt.com> (02/10/14 1.737.3.2)
   drivers/net/mii.c: only call netif_carrier_{on,off} if there is a state change

<thockin@freakshow.cobalt.com> (02/10/14 1.737.3.1)
   drivers/net/eepro100.c: 
   * mii cleanups
   * use mii_check_link()
   * check link every timer


[-- Attachment #3: netdrvr-11.tar.bz2 --]
[-- Type: application/x-bzip2, Size: 29800 bytes --]