From: "Sebastian Piecha" <spi@gmxpro.de>
To: James Morris <jmorris@redhat.com>,
LK-net <linux-net@vger.kernel.org>, <netdev@oss.sgi.com>
Subject: Re: oops in skbuff.c
Date: Sun, 26 Oct 2003 23:08:50 +0100 [thread overview]
Message-ID: <3F9C5402.9225.291F78E8@localhost> (raw)
> > > On Thu, 16 Oct 2003, Sebastian Piecha wrote:
> > >
> > > > panics. Copying more than 4 GB to the samba share also lets the
> > > > kernel panic with an OOPS.
> > >
> > > Does the above cause a panic for the 2.6-test kernels?
> > > Do you have netfilter enabled, and if so, any iptables modules loaded?
> > >
> > >
> > I did a mistake. iptables is installed but no rules added. I'll
> > remove iptables and rerun the check.
>
> For being sure I removed iptables but again the oops happened. I also
> tried kernel 2.4.18 without success.
>
> Does anybody have a clue how to go on?
I reinstalled my system from scratch. Debian testing, kernel 2.4.22,
samba 2.2.8a. Again the oops is occuring in skbuff.
With kernel 2.6.0-test7 I didn't get any oops. But I'd prefer using a
stable 2.4.x kernel. There are modifications in skbuff.c in kernel
2.6.0-test7.
For what reason skbuff.c has changed?
Due to bug fixes or general changes in the kernel?
Could skbuff.c easily be backported to 2.4.20 or 2.4.22?
And here's a copy of the last oops:
Oops: 0000
CPU: 0
EIP: 0010:[<c01c1402>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: c44ca6e0 ebx: 00200000 ecx: c44ca6e0 edx: 00200000
esi: cf80ae20 edi: fffffffd ebp: 00000046 esp: c029bf10
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c029b000)
Stack: 00000030 cf80ae20 c01c14c9 cf80ae20 cf80ae20 00000030 c01c1513
cf80ae20
cf80ae20 cf80ae20 c01c1697 cf80ae20 00000000 00000030 cf8105c0
cf80ae20
c01c65e3 cf80ae20 0000000e 00000001 c02ba568 c0121b95 c02ba568
00000002
Call Trace: [<c01c14c9>] [<c01c1513>] [<c01c1697>] [<c01c65e3>]
[<c0121b95>]
[<c010a88b>] [<c0107080>] [<c010cde8>] [<c0107080>] [<c01070a3>]
[<c0107132>]
[<c0105000>]
Code: 8b 42 78 8b 1b 48 74 0a ff 4a 78 0f 94 c0 84 c0 74 08 89 14
>>EIP; c01c1402 <skb_drop_fraglist+22/50> <=====
>>eax; c44ca6e0 <_end+41d3b18/14516498>
>>ecx; c44ca6e0 <_end+41d3b18/14516498>
>>esi; cf80ae20 <_end+f514258/14516498>
>>esp; c029bf10 <init_task_union+1f10/2000>
Trace; c01c14c9 <skb_release_data+69/a0>
Trace; c01c1513 <kfree_skbmem+13/70>
Trace; c01c1697 <__kfree_skb+127/1c0>
Trace; c01c65e3 <net_tx_action+43/c0>
Trace; c0121b95 <do_softirq+95/a0>
Trace; c010a88b <do_IRQ+9b/a0>
Trace; c0107080 <default_idle+0/40>
Trace; c010cde8 <call_do_IRQ+5/d>
Trace; c0107080 <default_idle+0/40>
Trace; c01070a3 <default_idle+23/40>
Trace; c0107132 <cpu_idle+52/70>
Trace; c0105000 <_stext+0/0>
Code; c01c1402 <skb_drop_fraglist+22/50>
00000000 <_EIP>:
Code; c01c1402 <skb_drop_fraglist+22/50> <=====
0: 8b 42 78 mov 0x78(%edx),%eax <=====
Code; c01c1405 <skb_drop_fraglist+25/50>
3: 8b 1b mov (%ebx),%ebx
Code; c01c1407 <skb_drop_fraglist+27/50>
5: 48 dec %eax
Code; c01c1408 <skb_drop_fraglist+28/50>
6: 74 0a je 12 <_EIP+0x12>
Code; c01c140a <skb_drop_fraglist+2a/50>
8: ff 4a 78 decl 0x78(%edx)
Code; c01c140d <skb_drop_fraglist+2d/50>
b: 0f 94 c0 sete %al
Code; c01c1410 <skb_drop_fraglist+30/50>
e: 84 c0 test %al,%al
Code; c01c1412 <skb_drop_fraglist+32/50>
10: 74 08 je 1a <_EIP+0x1a>
Code; c01c1414 <skb_drop_fraglist+34/50>
12: 89 14 00 mov %edx,(%eax,%eax,1)
<0>Kernel panic: Aiee, killing interrupt handler!
--
Mit freundlichen Gruessen/Best regards,
Sebastian Piecha
EMail: spi@gmxpro.de
next reply other threads:[~2003-10-26 22:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-26 22:08 Sebastian Piecha [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-10-29 17:00 oops in skbuff.c Sebastian Piecha
2003-10-17 20:50 Sebastian Piecha
2003-10-17 8:37 Sebastian Piecha
[not found] <3F8EF7B3.25278.5010BC6@localhost>
2003-10-16 19:15 ` James Morris
2003-10-16 20:01 ` Sebastian Piecha
2003-10-16 20:37 ` James Morris
2003-10-16 21:11 ` Sebastian Piecha
2003-10-17 15:33 ` James Morris
2003-10-17 12:17 ` Sebastian Piecha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F9C5402.9225.291F78E8@localhost \
--to=spi@gmxpro.de \
--cc=jmorris@redhat.com \
--cc=linux-net@vger.kernel.org \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).