Re: [net-next PATCH v5 05/10] net: pcs: lynx: Convert to an MDIO driver

[Sean Anderson <sean.anderson@linux.dev>]

On 5/23/25 17:33, Heiner Kallweit wrote:
> On 23.05.2025 22:33, Sean Anderson wrote:
>> This converts the lynx PCS driver to a proper MDIO driver.
>> This allows using a more conventional driver lifecycle (e.g. with a
>> probe and remove). It will also make it easier to add interrupt support.
>> 
>> The existing helpers are converted to bind the MDIO driver instead of
>> creating the PCS directly. As lynx_pcs_create_mdiodev creates the PCS
>> device, we can just set the modalias. For lynx_pcs_create_fwnode, we try
>> to get the PCS the usual way, and if that fails we edit the devicetree
>> to add a compatible and reprobe the device.
>> 
>> To ensure my contributions remain free software, remove the BSD option
>> from the license. This is permitted because the SPDX uses "OR".
>> 
>> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
>> ---
>> 
>> Changes in v5:
>> - Use MDIO_BUS instead of MDIO_DEVICE
>> 
>> Changes in v4:
>> - Add a note about the license
>> - Convert to dev-less pcs_put
>> 
>> Changes in v3:
>> - Call devm_pcs_register instead of devm_pcs_register_provider
>> 
>> Changes in v2:
>> - Add support for #pcs-cells
>> - Remove unused variable lynx_properties
>> 
>>  drivers/net/dsa/ocelot/Kconfig                |   4 +
>>  drivers/net/dsa/ocelot/felix_vsc9959.c        |  11 +-
>>  drivers/net/dsa/ocelot/seville_vsc9953.c      |  11 +-
>>  drivers/net/ethernet/altera/Kconfig           |   2 +
>>  drivers/net/ethernet/altera/altera_tse_main.c |   7 +-
>>  drivers/net/ethernet/freescale/dpaa/Kconfig   |   2 +-
>>  drivers/net/ethernet/freescale/dpaa2/Kconfig  |   3 +
>>  .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  |  11 +-
>>  drivers/net/ethernet/freescale/enetc/Kconfig  |   2 +
>>  .../net/ethernet/freescale/enetc/enetc_pf.c   |   8 +-
>>  .../net/ethernet/freescale/enetc/enetc_pf.h   |   1 -
>>  .../freescale/enetc/enetc_pf_common.c         |   4 +-
>>  drivers/net/ethernet/freescale/fman/Kconfig   |   4 +-
>>  .../net/ethernet/freescale/fman/fman_memac.c  |  25 ++--
>>  drivers/net/ethernet/stmicro/stmmac/Kconfig   |   3 +
>>  .../ethernet/stmicro/stmmac/dwmac-socfpga.c   |   6 +-
>>  drivers/net/pcs/Kconfig                       |  11 +-
>>  drivers/net/pcs/pcs-lynx.c                    | 110 ++++++++++--------
>>  include/linux/pcs-lynx.h                      |  13 ++-
>>  19 files changed, 128 insertions(+), 110 deletions(-)
>> 
>> diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
>> index 081e7a88ea02..907c29d61c14 100644
>> --- a/drivers/net/dsa/ocelot/Kconfig
>> +++ b/drivers/net/dsa/ocelot/Kconfig
>> @@ -42,7 +42,9 @@ config NET_DSA_MSCC_FELIX
>>  	select NET_DSA_TAG_OCELOT_8021Q
>>  	select NET_DSA_TAG_OCELOT
>>  	select FSL_ENETC_MDIO
>> +	select PCS
>>  	select PCS_LYNX
>> +	select MDIO_BUS
> 
> This shouldn't be needed. NET_DSA selects PHYLINK, which selects PHYLIB,
> which selects MDIO_BUS. There are more places in this series where the
> same comment applies.

select does not transitively enable dependencies. See the note in
Documentation/kbuild/kconfig-language.rst for details. Therefore we must
select the dependencies of things we select in order to ensure we do not
trip sym_warn_unmet_dep.

--Sean