From: marco gaddoni <marco.gaddoni@gmail.com>
To: Matt Carlson <mcarlson@broadcom.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: Re: tg3 driver / BCM5722 dropping to 10Base-HD
Date: Wed, 20 Jan 2010 08:40:55 +0100 [thread overview]
Message-ID: <3b2bc9d1001192340t29834477oc2943e3306700c63@mail.gmail.com> (raw)
In-Reply-To: <20100119230827.GA23501@xw6200.broadcom.net>
On Wed, Jan 20, 2010 at 00:08, Matt Carlson <mcarlson@broadcom.com> wrote:
> On Mon, Jan 18, 2010 at 06:17:32AM -0800, marco gaddoni wrote:
>> Hello,
>>
>> i have a dell with a BCM5722 driven by the tg3 driver.
>>
>> this pc is connected to an unmanaged switch by micronet;
>> the connection is at 1000MBs.
>>
>> the system is normally stable;
>> sometimes the connection get dropped to 10Mbs/HD.
>>
>> i can get te connection back up to 1000Mbps
>> with an ethtool -t eth0.
>>
>> do you have any idea on what is the cause of this ?
>> is this the wrong adderess?
>>
>> please cc: me as i am not subscibed to netdev.
>>
>> thank you in advance,
>> marco,
>
> Can you post the driver messages from the syslog and the output of
> ethtool -i eth0?
>
>
hello,
here they are:
tg3.c:v3.99d (May 26, 2009)
tg3 0000:01:00.0: setting latency timer to 64
eth0: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address
00:26:b9:2e:79:b9
eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
tg3 0000:02:00.0: setting latency timer to 64
eth1: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address
00:26:b9:2e:79:ba
eth1: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
...
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
srvlinux:~ # ethtool -i eth0
driver: tg3
version: 3.99d
firmware-version: 5722-v3.08, ASFIPMI v6.02
bus-info: 0000:01:00.0
--
"Reality continues to ruin my life." - Calvin.
prev parent reply other threads:[~2010-01-20 7:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-18 14:17 tg3 driver / BCM5722 dropping to 10Base-HD marco gaddoni
2010-01-19 23:08 ` Matt Carlson
2010-01-20 7:40 ` marco gaddoni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3b2bc9d1001192340t29834477oc2943e3306700c63@mail.gmail.com \
--to=marco.gaddoni@gmail.com \
--cc=mcarlson@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).