netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH net-next v3 0/3] add tx packets aggregation to ethtool and rmnet
@ 2022-12-05  9:33 Daniele Palmas
  2022-12-05  9:33 ` [PATCH net-next v3 1/3] ethtool: add tx aggregation parameters Daniele Palmas
                   ` (2 more replies)
  0 siblings, 3 replies; 9+ messages in thread
From: Daniele Palmas @ 2022-12-05  9:33 UTC (permalink / raw)
  To: David Miller, Jakub Kicinski, Paolo Abeni, Eric Dumazet,
	Subash Abhinov Kasiviswanathan, Sean Tranchetti, Jonathan Corbet,
	Alexander Lobakin, Gal Pressman
  Cc: Bjørn Mork, Greg Kroah-Hartman, Dave Taht, netdev,
	Daniele Palmas

Hello maintainers and all,

this patchset implements tx qmap packets aggregation in rmnet and generic
ethtool support for that.

Some low-cat Thread-x based modems are not capable of properly reaching the maximum
allowed throughput both in tx and rx during a bidirectional test if tx packets
aggregation is not enabled.

I verified this problem with rmnet + qmi_wwan by using a MDM9207 Cat. 4 based modem
(50Mbps/150Mbps max throughput). What is actually happening is pictured at
https://drive.google.com/file/d/1gSbozrtd9h0X63i6vdkNpN68d-9sg8f9/view

Testing with iperf TCP, when rx and tx flows are tested singularly there's no issue
in tx and minor issues in rx (not able to reach max throughput). When there are concurrent
tx and rx flows, tx throughput has an huge drop. rx a minor one, but still present.

The same scenario with tx aggregation enabled is pictured at
https://drive.google.com/file/d/1jcVIKNZD7K3lHtwKE5W02mpaloudYYih/view
showing a regular graph.

This issue does not happen with high-cat modems (e.g. SDX20), or at least it
does not happen at the throughputs I'm able to test currently: maybe the same
could happen when moving close to the maximum rates supported by those modems.
Anyway, having the tx aggregation enabled should not hurt.

The first attempt to solve this issue was in qmi_wwan qmap implementation,
see the discussion at https://lore.kernel.org/netdev/20221019132503.6783-1-dnlplm@gmail.com/

However, it turned out that rmnet was a better candidate for the implementation.

Moreover, Greg and Jakub suggested also to use ethtool for the configuration:
not sure if I got their advice right, but this patchset add also generic ethtool
support for tx aggregation.

The patches have been tested mainly against an MDM9207 based modem through USB
and SDX55 through PCI (MHI).

v2 should address the comments highlighted in the review: the implementation is
still in rmnet, due to Subash's request of keeping tx aggregation there.

v3 fixes ethtool-netlink.rst content out of table bounds and a W=1 build warning
for patch 2.

Thanks,
Daniele

Daniele Palmas (3):
  ethtool: add tx aggregation parameters
  net: qualcomm: rmnet: add tx packets aggregation
  net: qualcomm: rmnet: add ethtool support for configuring tx
    aggregation

 Documentation/networking/ethtool-netlink.rst  |  17 ++
 .../ethernet/qualcomm/rmnet/rmnet_config.c    |   5 +
 .../ethernet/qualcomm/rmnet/rmnet_config.h    |  20 ++
 .../ethernet/qualcomm/rmnet/rmnet_handlers.c  |  18 +-
 .../net/ethernet/qualcomm/rmnet/rmnet_map.h   |   6 +
 .../ethernet/qualcomm/rmnet/rmnet_map_data.c  | 191 ++++++++++++++++++
 .../net/ethernet/qualcomm/rmnet/rmnet_vnd.c   |  54 ++++-
 .../net/ethernet/qualcomm/rmnet/rmnet_vnd.h   |   1 +
 include/linux/ethtool.h                       |  12 +-
 include/uapi/linux/ethtool_netlink.h          |   3 +
 net/ethtool/coalesce.c                        |  22 +-
 11 files changed, 342 insertions(+), 7 deletions(-)

-- 
2.37.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2022-12-21 15:34 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-12-05  9:33 [PATCH net-next v3 0/3] add tx packets aggregation to ethtool and rmnet Daniele Palmas
2022-12-05  9:33 ` [PATCH net-next v3 1/3] ethtool: add tx aggregation parameters Daniele Palmas
2022-12-05  9:33 ` [PATCH net-next v3 2/3] net: qualcomm: rmnet: add tx packets aggregation Daniele Palmas
2022-12-07 12:45   ` Paolo Abeni
2022-12-09  7:38     ` Daniele Palmas
2022-12-20 14:28       ` Daniele Palmas
2022-12-20 15:28         ` Paolo Abeni
2022-12-21 15:22           ` Daniele Palmas
2022-12-05  9:33 ` [PATCH net-next v3 3/3] net: qualcomm: rmnet: add ethtool support for configuring tx aggregation Daniele Palmas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).